Estimation of groundwater recharge rates using soil-water isotope profiles: a case study of two contrasting dune types on Langeoog Island,Germany

Hydrogeology Journal - The creation of artificial dunes for coastal protection may have important consequences for freshwater lenses in coastal aquifers. The objective of this study was to compare...     

Corundum formation by metasomatic reactions in Archean metapelite,SW Greenland:Exploration vectors for ruby deposits within high-grade greenstone belts

Corundum (ruby-sapphire) is known to have formed in situ within Archean metamorphic rocks at several localities in the North Atlantic Craton of Greenland. Here we present two case studies for such occurrences: (1) Maniitsoq region (Kangerdluarssuk), where kyanite paragneiss hosts ruby corundum, and (2) Nuuk region (Storø), where sillimanite gneiss hosts ruby corundum. At both occurrences, ultramafic rocks (amphibole-peridotite) are in direct contact with the ruby-bearing zones, which have been transformed to mica schist by metasomatic reactions. The bulk-rock geochemistry of the ruby-bearing rocks is consistent with significant depletion of SiO₂ in combination with addition of Al₂O₃, MgO, K₂O, Th and Sr relative to an assumed aluminous precursor metapelite. Phase equilibria modelling supports ruby genesis from the breakdown of sillimanite and kyanite at elevated temperatures due to the removal of SiO₂. The juxtaposition of relatively silica- and aluminum-rich metasedimentary rocks with low silica ultramafic rocks established a chemical potential gradient that leached/mobilized SiO₂ allowing corundum to stabilize in the former rocks. Furthermore, addition of Al₂O₃ via a metasomatic reaction is required, because Al/Ti is fractionated between the aluminous precursor metapelites and the resulting corundum-bearing mica schist. We propose that Al was mobilized either by complexation with hydroxide at alkaline conditions, or that Al was transported as K-Al-Si-O polymers at deep crustal levels. The three main exploration vectors for corundum within Archean greenstone belts are: (1) amphibolite- to granulite-facies metamorphic conditions, (2) the juxtaposition of ultramafic rocks and aluminous metapelite, and (3) mica-rich reactions zones at their interface.     

A GIS based planning support system for assessing financial feasibility of urban redevelopment

Urban densification trends combined with redevelopment increasingly moving away from large former industrial and transport sites toward existing town centres and corridors indicate redevelopment is becoming increasingly complex, difficult to plan for and undertake. The interplay between land and property markets and planning frameworks suggest city planners and urban researchers need new tools and methodologies to gain insights into ways to deliver effective responses. Despite the need, there is a limited availability of comprehensive models to fulfil the task. This paper describes a GIS-based tool to assess parcel-level financial feasibility and housing supply associated with urban redevelopment within a precinct. The tool incorporates existing and potential built form and parameters associated with the planning framework and land and property markets. Using a real case study in a workshop, tool performance was evaluated by professional urban planners in terms of its capacity to produce metrics and visualisations of potential scenarios of redevelopment. Results indicate the usefulness of the tool for emulating land market conditions and testing scenarios of planning regulation and market changes for strategic planning purposes.     

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

Neoliberalism and natural resource management: Agri-environmental standards and the governing of farming practices

Private standards and certification schemes are widely acknowledged as playing an increasingly important role in agri-environmental governance. While much of the existing research concludes that these mechanisms consolidate the global extension of neoliberalism – enhancing the power of corporate actors to the detriment of smaller producers – we argue that this overlooks the complex ways in which standards are used by governments and farmers in the governing of farming practices. Focusing specifically on a process standard – Environmental Management Systems (EMS) – promoted by the Australian government as a way of verifying the ‘clean and green’ status of agricultural exports, we examine how one regional group of producers has sought to use EMS standards in practice. Our analysis of a case study in the state of Victoria appears to confirm that EMS was a successful instrument for the extension of neoliberal governance, reinforcing the production of neoliberal subjectivities and practices amongst farmer participants and enabling the government to compensate for gaps in environmental provision. However, it would be a mistake to interpret the development of this EMS scheme as an example of naïve farmers manipulated by the state. In practice, farmers used the opportunities provided by government funding to undertake actions which expressed their own agri-environmental values and practices. Establishment of an EMS and associated eco-label enabled producers to demonstrate and extend their capacity to act as good environmental stewards. Our research highlights how the local application of environmental standards negotiates and shapes, rather than simply contributes to, neoliberal rule.     

Analysis of Unit Supporting Time and Support Installation Time for Open TBMs

Estimation of advance rate and utilization of tunnel boring machines (TBM) are some of the important steps in planning a TBM tunneling project. Estimation of the utilization factor depends on realistic analysis of downtime components. Among the different parameters influencing TBM downtime, tunnel support is the most influential factor, which can take up to 50% of the total excavation time in some cases. Although, there are some rock mass classification systems specifically developed to link ground conditions with the type and amount of support installed in TBM tunneling, the related downtime for support installation has not been studied in detail. Unit supporting time (UST) is the time required for the installation of ground support per unit length of tunnel. Support installation time (SIT) is the time required for installation of a single ground support element. In this paper, approximate ranges of UST and SIT are discussed and analyzed on the basis of recorded ground SIT from a number of TBM tunneling projects. The primary goal of this paper is to link UST with rock mass classifications that have been specifically developed to assess ground support requirements for different tunnel sections using open-type TBM. An accurate estimate of UST and SIT allows for realistic determination of the related downtime and TBM utilization rate.     

A Note on Extension Variances in IR2

Matheron (1971) proposed an approximation of the extension variance in IR. We propose in this note an extension of this formula in IR ² , based on a MacLaurin formula. Its application is shown in an example, the estimation of the maximum depressional storage of a soil surface.     

Displacement-length scaling relations for faults on the terrestrial planets

Displacement-length (D/L)scaling relations for normal and thrust faults from Mars, and thrust faults from Mercury, for which sufficiently accurate measurements are available, are consistently smaller than terrestrial D/L ratios by a factor of about 5, regardless of fault type (i.e. normal or thrust). We demonstrate that D/L ratios for faults scale, to first order, with planetary gravity. In particular, confining pressure modulates: (1) the magnitude of shear driving stress on the fault; (2) the shear yield strength of near-tip rock; and (3) the Young's (or shear) modulus of crustal rock. In general, all three factors decrease with gravity for the same rock type and pore-pressure state (e.g. wet conditions). Faults on planets with lower surface gravities, such as Mars and Mercury, demonstrate systematically smaller D/L ratios than faults on larger planets, such as Earth. Smaller D/L ratios of faults on Venus and the Moon are predicted by this approach, and we infer still smaller values of D/L ratio for faults on icy satellites in the outer solar system. Collection of additional displacement-length and down-dip height data from terrestrial normal, strike-slip, and thrust faults, located within fold-and-thrust belts, plate margins, and continental interiors, is required to evaluate the influence of fault shape and progressive deformation on the scaling relations for faults from Earth and elsewhere.