Role of mangrove in mercury cycling and removal in the Jiulong Estuary

Baseline of mercury in mangrove swamp The mercury content in sediments in the Jiulong Estuary was determined in 1984 and 1985(Table 1). The highest content of mercury in sediments (300×10~(-9)) was found in Ditou, contrast-ing strongly with the low content of 36×10~(-9) in Port Dongzhai in the Hainan Island. Tab1e 1 showsthat the average content of mercury in sediments in the Jiulong Estuary is 140×10~(-9) and the averageof four areas is 72×10~(-9). This value means that these areas have not been heavily contaminated by     

新生相形成的模拟实验研究

通过模拟实验制备了硅酸盐类不溶性固体，从Ｘ射线衍射特征和红外光谱特征两方面看，制得的硅酸盐类与河口新生相成分，结构相似，表明铁水解成的β－ＦｅＯＯＨ胶体吸附Ｓｉ，Ａｌ，Ｍｇ，Ｋ等元素，经结构重组可形成硅酸盐矿物，这可能是河口体系新生相的形成原因。     

The Contribution of Secondary Space to Benthic Taxon Richness of a Coral Reef: Colonisation of Dendrostrea frons (Mollusca)

Abstract. The reef‐dwelling oyster Dendrostrea frons occupied only a small proportion of space in coral reefs of the Quirimba Archipelago, Mozambique, but supported a disproportionately high variety of taxa. Assemblages on primary (substratum), secondary (dead coral heads) and ephemeral secondary space (D. frons shells) of similar area were compared across 5 depths (5, 10, 15, 20 and 25 m) and at four taxonomic levels (species, genus, class and phylum). Differences between the taxonomic richness of each type of space differed with both taxonomic level considered and depth. Of the three categories of space considered, ephemeral secondary space had the most taxa at all levels with the maximum at 10 – 15 m. Despite being small in space and time, animal externa, such as shells of D. frons, may provide important niches for particular organisms at many taxonomic levels.     

Annual and interannual variations of large-scale circulation over the tropics as revealed from OLR data

In this study, the outgoing longwave radiation (OLR) data of eight years have been used to investigate the annual and interannual variations of large-scale circulation over the tropics. The results of EOF analysis indicate that the first three eigenvectors reflect the essential features in OLR annual variation. However, they contribute little to the interannual change. In comparison, the fourth to the sixth components have very large year-to-year variations. The pronounced anomalies are located over the tropics with east-west dipole pattern. It implies that ENSO events are related closely to the variation of the Walker circulation.     

甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

我国东部邻海恶劣天气的时空分布及其成因初探

本文利用1930～1979年NCDC海洋船舶观测的气象资料,分析了中国东部邻海恶劣天气的时空分布。结果表明,海区恶劣天气的分布在冬季和夏季是不同的;在东北和西南季风期间,台湾东北和西南海区也有差异。影响恶劣天气条件的分布因子非常复杂,主要是季风和极锋、天气系统、冷暖洋流及地形等因子。     

McCreary和Fickian湍扩散形式差异的分析

用矩阵方法,求解McCreary和Fickian铅垂向湍扩散形式下,无界海洋条件时在风应力和深层浮力作用下的线性解。得出不同的湍扩散系数A情况下McCreary与Fickian湍扩散形式的流场结构。指出随湍扩散系数的增加,McCreary和Fickian湍扩散形式下u分量结构及其量值差异增大。在Fickian湍扩散形式下,能量穿越密度跃层的传递能力较强。当A=0.1cm~2s~(-3)时,在风应力和深层浮力作用下两种湍扩散形式造成流场的差异很小。提出在小湍扩散系数下,用McCreary湍扩散形式研究热带海洋环流,其结果和Fickian形式应相当一致。     

中国对虾镰刀菌病的细胞病理研究

本文报导中国对虾养成期病原体茄类镰刀菌Fusarium solani(Mart)的细微结构及其引起宿主的细胞病理变化,以便为该病的正确诊断和有效防治提供依据。     

西沙群岛龙介虫科两新种

龙介虫科Serpulidae的盘管虫Hydroides栖于石灰质管内,又名石灰虫,营附着生活，是有害附着生物之一。它们大量附着在船底,影响航行速度;附着在软体动物的重要养殖种类(珍珠贝、鲍、牡蛎等)的贝売上面,影响贝类生长,危害贝类养殖事业。因此,进行龙介虫科分类,生态的研究,可为有害生物的防除工作提供基本资料。 1956年和1975年,中国科学院海洋研究所在我国西沙群岛考察时,在永兴岛和珊瑚岛采到龙介虫科,盘管虫属两个新种,描述如下：     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.