Identification of aquifer and well parameters from step-drawdown tests

A new analysis technique has been proposed for interpreting transient step-drawdown test data. The proposed method is based on taking the derivative of the drawdown with respect to time for the entire pumping test period to eliminate the time-independent well-loss terms. The derivative function is subsequently integrated to obtain the time-dependent aquifer drawdown as a continuous function. The well-loss parameters are then obtained with higher accuracy once the aquifer behavior is identified. The proposed method is applicable for analyzing data obtained not only from ideal confined aquifers but also from other aquifer types (i.e. unconfined) and non-ideal aquifers (i.e. heterogeneous). The technique was tested for synthetically generated and field data; the proposed approach was noted to provide accurate aquifer and well-loss parameter estimates. The results of the proposed method were compared with those of some of the existing methods for analyzing step-drawdown test data and were found to be more reliable and robust.     

Investigation on the Levels of Heavy Metals,Polycyclic Aromatic Hydrocarbons,and Polychlorinated Biphenyls in Sewage Sludge Samples and Ecotoxicological Testing

This article reports the levels of heavy metals, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in sewage sludges taken from two wastewater treatment plants (WWTPs) in Konya (Turkey) as well as their toxicity. The concentrations of heavy metals, including Cd, Cr, Cu, Ni, Pb, Zn in sludge samples from plant #2 did not exceed the limits described in both Turkish and European Union (EU) regulations. The similar result was observed in samples obtained from plant #1, except for sludge taken in May 2010. The ΣPAHs concentration ranging from 960 to 7680 µg/kg dry matter shows that sewage sludges from plant #1 could be used for agricultural purpose. However, sewage sludges from plant #2 (ΣPAHs: 1077–17 509 µg/kg dry matter) was not suitable for using in agriculture. The concentrations of ΣPCBs in all investigated sludges from plant #1 (7.46–709.36 µg/kg dry matter) and plant #2 (14.12–788.47 µg/kg dry matter) were lower than the limits reported in Turkish and EU regulations. The probable sources of PAHs and PCBs in sludges were also determined. The ecotoxicological tests examined on Vibrio fischeri and Lepidium sativum organisms showed that sludges from plant #1 had no significant toxic effect, while sludges from plant #2 had acute toxic property. Finally, all the results showed that sewage sludges from plant #1 had potential for being used in agriculture.     

Geoid determination in Turkey (TG-91)

It is considered that precise geoid determination is one of the main current geodetic problems in Turkey since GPS defined coordinates require geoidal heights in practice. In order to determine the geoid by least squares collocation (LSC) the area covering Turkey was divided into 114 blocks of size 1° × 1°. LSC approximation to the geoid based upon the tailored geopotential model GPM2-T1 is constructed within each block. The model GPM2-T1 complete to degree and order 200 has been developed by tailoring of the model GPM2 to mean free-air anomalies and mean heights of one degree blocks in Turkey. Terrain effect reduced point gravity data spaced 5 × 5 within each block which the sides extended 0°.5 were used in LSC. Residual terrain model (RTM) depends on point heights at 15×20 griding and 5×5 and 15×15 mean heights has been carried out in terrain effect reduction. Indirect effect of RTM on geoid is also taken into account. The geoid, called Turkish Geoid 1991 (TG-91), referenced to GRS-80 ellipsoid has been computed at 3 × 3 griding nodes within each block. The quality of the TG-91 is also evaluated by comparing computed and GPS derived geoidal height differences, and 2.1 – 2.6 ppm accuracy for average baseline lenght of 45 km is obtained.     

Composting of olive processing wastes and tomato stalks together with sewage sludge or dairy manure

In this study, composting of olive pomace from three-phase oil production system, sewage sludge, dairy manure, and tomato stalks were carried out. The effects of carbon/nitrogen ratio on decomposition rate of composting were investigated with constant free air spaces of composting mixtures. Composting process was carried out in the aerobic reactors made of stainless steel which were monitored for 32 days. Temperature-controlled feedback system was operated based on the Rutgers strategy. Temperature, moisture, organic matter, pH, electrical conductivity total carbon, total nitrogen, ammonium nitrogen and nitrate nitrogen, total phosphorus as well as potassium were monitored during the composting process. In addition, mass and volume changes of the mixtures were determined. The highest degree of decomposition was determined for the mixture (carbon/nitrogen ratio of 20) based on the dry matter loss where the maximum amount of sewage sludge was used. On the other hand, maximum decomposition occurred at a carbon/nitrogen ratio of 23 for mixtures containing dairy manure. The increase in the use of olive pomace in mixtures had adverse effects on the decomposition process. The stabilization process in the mixture containing dairy manure lasted shorter than the mixtures containing sewage sludge.     

A high-resolution modelling study of the Turkish Straits System

High-resolution modelling, for the first time, is used to study the basic hydrodynamics of the Turkish Straits System (TSS). Hydraulic controls in the Bosphorus and Dardanelles Straits are found to be essential in determining the coupled response of the TSS, which directly influences the interaction between the Mediterranean and Black Seas. The mixed baroclinic—barotropic response of the system is investigated as a function of the net barotropic flux and density stratification imposed at external boundaries, in the absence of atmospheric and tidal effects. The intense surface jet issuing from the Bosphorus is found to drive the basin-wide circulation of the Marmara Sea, varying with the net flux. The temporal response of the Bosphorus and Dardanelles Straits picks up rather fast, within a day or two, thanks to hydraulic controls within straits, while the surface currents in the Marmara Sea only approach steady state after a few months. Model stratification and circulation features are validated against independent measurements and a stand-alone model of the Bosphorus.     

On the determination of marine magnetotelluric receiver orientation using land magnetic observatory data

Marine magnetotelluric measurements using “free‐fall’’ instruments without effective compasses suffer from the problem of unknown orientation of the receivers at the seafloor. While past works indicate that marine magnetotelluric orientation of the instruments can be estimated by reference to land deployments of known orientation using the transfer tensor method, there is limited published information on how this is implemented in practice. We document this method and propose a set of new time‐ and frequency‐domain approaches to solve this orientation problem of the seafloor receivers. We test these methodologies in onshore and offshore magnetotelluric data whose orientations are well known and apply these techniques to marine magnetotelluric data with unknown orientation. For the controlled tests, both time‐ and frequency‐domain approaches produce overall comparable results. To investigate the effects of the subsurface structure distribution on the orientation process, a dimensionality analysis of a controlled dataset is carried out. In subsequent analysis using the available disoriented marine magnetotelluric data from offshore Brazil and from the Vassouras magnetic observatory on the mainland for remote referencing, frequency‐domain methods yield approximate orientation angles among themselves with low standard deviation each. Time‐domain results are consistent for most cases but differ from frequency‐domain results for some situations.     

A new method for aquifer system identification and parameter estimation

The standard practice for assessing aquifer parameters is to match groundwater drawdown data obtained during pumping tests against theoretical well function curves specific to the aquifer system being tested. The shape of the curve derived from the logarithmic time derivative of the drawdown data is also very frequently used as a diagnostic tool to identify the aquifer system in which the pumping test is being conducted. The present study investigates the incremental area method (IAM) to serve as an alternative diagnostic tool for the aquifer system identification as well as a supplement to the aquifer parameter estimation procedure. The IAM based diagnostic curves for ideal confined, leaky, bounded and unconfined aquifers have been derived as part of this study, and individual features of the plots have been identified. These features were noted to be unique to each aquifer setting, which could be used for rapid evaluation of the aquifer system. The effectiveness of the IAM methodology was investigated by analyzing field data for various aquifer settings including leaky, unconfined, bounded and heterogeneous conditions. The results showed that the proposed approach is a viable method for use as a diagnostic tool to identify the aquifer system characteristics as well as to support the estimation of the hydraulic parameters obtained from standard curve matching procedures. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitivity Study of Hydrodynamic Parameters During Numerical Simulations of Tsunami Inundation

This paper describes the analysis of a parameter, “hydrodynamic demand,” which can be used to represent the potential for tsunami drag force related damage to structures along coastlines. It is derived from the ratio of drag force to hydrostatic force caused by a tsunami on the structure. It varies according to the instantaneous values of the current velocities and flow depths during a tsunami inundation. To examine the effects of a tsunami in the present study, the analyses were performed using the tsunami numerical model in two altered regular-shaped basins having different bottom slopes. The simulations were implemented using a single sinusoidal wave with particular initial conditions, such as leading elevation wave and leading depression wave profiles with different wave periods. Two different initial wave amplitudes were employed to assess the diversity in the distribution of the square of the Froude number Fr ² along the coastline. The numerical results were compared quantitatively.     

Aquifer parameter estimation using an incremental area method

Theoretical well functions have been derived over the years to predict ground water level behaviour in aquifer systems under stress owing to groundwater extraction. The drawdown data collected during pump tests are typically analysed using graphical curve‐matching procedures to estimate aquifer parameters based on these well functions. Difficulty in aquifer characteristic identification and parameter estimation may arise when the field data do not perfectly match the drawdown curves obtained from the well functions. The present study provides a new method for the interpretation of aquifer pump tests which supplements the existing curve‐matching procedures in case ideal conditions do not exist; the proposed method provides a greater degree of flexibility in the data analysis for diagnostic tool purposes. The method, referred to as the Incremental Area Method (IAM) is based on integrating the logarithmic‐based drawdown curves within a discrete time and matching the results with a corresponding time integral of the Theis ( 1935 ) Well Function which governs ideal confined aquifers. The application of the proposed method to synthetically generated data and field data showed that IAM represents a viable method which yields information on potential non‐idealness of the aquifer and provides aquifer parameter estimates thus potentially overcoming drawdown data curve‐matching difficulties. Copyright © 2011 John Wiley & Sons, Ltd.     

Levels of Organohalogenated Pollutants in Human Milk Samples from Konya City,Turkey

This study reports the levels of organochlorine pesticides (OCPs, α‐, β‐, γ‐ and Δ‐HCHs, p,p′‐DDE, p,p′‐DDD and p,p′‐DDT), polychlorinated biphenyls (PCBs, PCB 28, 52, 101, 153, 138 and 180 congeners) and polybrominated diphenyl ethers (PBDEs, PBDE 47, 99, 100, 153 and 154 congeners) in 45 individual human milk samples collected from Konya City, Turkey. Average concentrations of ΣHCHs, ΣDDTs, ΣPCBs and ΣPBDEs were 22.62, 37.10, 104.95 and 67.34 ng/g lipid wt., respectively. No significant differences in investigated pollutants were found between primiparous and multiparous mothers. There was no correlation between levels of each group of pollutants in human milk and the age of mothers. Moreover, there was no significant difference in the levels of ΣDDTs, between mothers who have eaten fish more than once a week and those who consumed fish less than once. An analysis of the infant exposure to DDTs, HCHs and PCBs via mother's milk indicated that the estimated daily intakes of these pollutants were below the guideline proposed by the World Health Organization (WHO) and the Health Canada which means that there is definitely no concern on children health.