The potential for agricultural land use change to reduce flood risk in a large watershed

Effects of agricultural land management practices on surface runoff are evident at local scales, but evidence for watershed‐scale impacts is limited. In this study, we used the Soil and Water Assessment Tool model to assess changes in downstream flood risks under different land uses for the large, intensely agricultural, Raccoon River watershed in Iowa. We first developed a baseline model for flood risk based on current land use and typical weather patterns and then simulated the effects of varying levels of increased perennials on the landscape under the same weather patterns. Results suggest that land use changes in the Raccoon River could reduce the likelihood of flood events, decreasing both the number of flood events and the frequency of severe floods. The duration of flood events were not substantially affected by land use change in our assessment. The greatest flood risk reduction was associated with converting all cropland to perennial vegetation, but we found that converting half of the land to perennial vegetation or extended rotations (and leaving the remaining area in cropland) could also have major effects on reducing downstream flooding potential. We discuss the potential costs of adopting the land use change in the watershed to illustrate the scale of subsidies required to induce large‐scale conversion to perennially based systems needed for flood risk reduction. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydrographic Vertical Separation Surfaces (HyVSEPs) for the Tidal Waters of Canada

Since the advent of Global Navigation Satellite Systems, it has been possible to perform hydrographic survey reductions through the ellipsoid, which has the potential to simplify operations and improve bathymetric products. This technique requires a spatially continuous separation surface connecting chart datum (CD) to a geodetic ellipsoid. The Canadian Hydrographic Service (CHS), with support from the Canadian Geodetic Survey, has developed a new suite of such surfaces, termed Hydrographic Vertical Separations Surfaces, or HyVSEPs, for CD and seven tidal levels. They capture the spatial variability of the tidal datum and levels between tide gauges and offshore using semiempirical models coupling observations at tide stations with relative sea-level rise estimates, dynamic ocean model solutions, satellite altimetry, and a geoid model. HyVSEPs are available for all tidal waters of Canada, covering over seven million square kilometers of ocean and more than 200,000 kilometers of shoreline. This document provides an overview of the CHS's modeling approach, tools, methods, and procedures.

The HyVSEP for CD defines the new hydrographic datum for the tidal waters of Canada. HyVSEPs for other tidal levels are fundamental for coastal studies, climate change adaptation and the definition of the Canadian shoreline and offshore boundaries. HyVSEPs for inland waters are not discussed.     

Quantifying fracture geometry with X-ray tomography: Technique of Iterative Local Thresholding (TILT) for 3D image segmentation

This paper presents a new method—the Technique of Iterative Local Thresholding (TILT)—for processing 3D X-ray computed tomography (xCT) images for visualization and quantification of rock fractures. The TILT method includes the following advancements. First, custom masks are generated by a fracture-dilation procedure, which significantly amplifies the fracture signal on the intensity histogram used for local thresholding. Second, TILT is particularly well suited for fracture characterization in granular rocks because the multi-scale Hessian fracture (MHF) filter has been incorporated to distinguish fractures from pores in the rock matrix. Third, TILT wraps the thresholding and fracture isolation steps in an optimized iterative routine for binary segmentation, minimizing human intervention and enabling automated processing of large 3D datasets. As an illustrative example, we applied TILT to 3D xCT images of reacted and unreacted fractured limestone cores. Other segmentation methods were also applied to provide insights regarding variability in image processing. The results show that TILT significantly enhanced separability of grayscale intensities, outperformed the other methods in automation, and was successful in isolating fractures from the porous rock matrix. Because the other methods are more likely to misclassify fracture edges as void and/or have limited capacity in distinguishing fractures from pores, those methods estimated larger fracture volumes (up to 80 %), surface areas (up to 60 %), and roughness (up to a factor of 2). These differences in fracture geometry would lead to significant disparities in hydraulic permeability predictions, as determined by 2D flow simulations.     

城市居民压力源对幸福感的影响研究——基于乡村旅游休闲参与的角度

居民幸福感研究日益受到重视,以往研究多是从自然环境、社会人文环境和城市化进程等方面探讨大尺度空间环境因素对城市居民幸福感的影响。结合乡村旅游的角度探讨城市居民幸福感的影响研究,目前还较少。运用SEM分析方法,探究处于多维压力之下的城市居民旅游者如何通过前往乡村进行旅游休闲活动提升幸福感,进行模型构建与分析,结果显示：① 压力源对调适策略有显著正向影响,对休闲参与不显著,但不同群体影响差异显著,压力调适对休闲参与有显著正向影响;② 休闲参与对心流体验和幸福感具有显著正向关系,且心流体验对幸福感具有显著正向影响;③ 心流体验对休闲效益具有正向显著影响,且休闲效益对幸福感具有正向显著影响;④ 心流体验在休闲参与对幸福感、休闲效益在心流体验对幸福感均具有显著中介效应;⑤ 旅游者不同背景变项在压力调适、休闲参与及幸福感等分别呈现不同程度的显著差异。     

Transitional impact craters on the Moon: Insight into the effect of target lithology on the impact cratering process

We studied a data set of 28 well‐preserved lunar craters in the transitional (simple‐to‐complex) regime with the aim of investigating the underlying cause(s) for morphological differences of these craters in mare versus highland terrains. These transitional craters range from 15 to 42 km in diameter, demonstrating that the transition from simple to complex craters is not abrupt and occurs over a broad diameter range. We examined and measured the following crater attributes: depth (d), diameter (D), floor diameter (D_f), rim height (h), and wall width (w), as well as the number and onset of terraces and rock slides. The number of terraces increases with increasing crater size and, in general, mare craters possess more terraces than highland craters of the same diameter. There are also clear differences in the d/D ratio of mare versus highland craters, with transitional craters in mare targets being noticeably shallower than similarly sized highland craters. We propose that layering in mare targets is a major driver for these differences. Layering provides pre‐existing planes of weakness that facilitate crater collapse, thus explaining the overall shallower depths of mare craters and the onset of crater collapse (i.e., the transition from simple to complex crater morphology) at smaller diameters as compared to highland craters. This suggests that layering and its interplay with target strength and porosity may play a more significant role than previously considered.     

Integration of optical and Synthetic Aperture Radar (SAR) imagery for delivering operational annual crop inventories

Agriculture plays a critical role within Canada’s economy and, as such, sustainability of this sector is of high importance. Targeting and monitoring programs designed to promote economic and environmental sustainability are a vital component within Canada’s agricultural policy. A hierarchy of land information, including up to date information on cropping practices, is needed to measure the impacts of programs on land use decision-making and to gauge the environmental and economic benefits of these investments. A multi-year, multi-site research activity was completed to develop a robust methodology to inventory crops across Canada’s large and diverse agricultural landscapes. To move towards operational implementation the methodology must deliver accurate crop inventories, with consistency and reliability. In order to meet these operational requirements and to mitigate risk associated with reliance on a single data source, the methodology integrated both optical and Synthetic Aperture Radar (SAR) imagery. The results clearly demonstrated that multi-temporal satellite data can successfully classify crops for a variety of cropping systems present across Canada. Overall accuracies of at least 85% were achieved, and most major crops were also classified to this level of accuracy. Although multi-temporal optical data would be the preferred data source for crop classification, a SAR-optical dataset (two Envisat ASAR images and one optical image) provided acceptable accuracies and will mitigate risk associated with operational implementation. The preferred dual-polarization mode would be VV–VH. Not only were these promising classification results repeated year after year, but the target accuracies were met consistently for multiple sites across Canada, all with varying cropping systems.