Hydrofracturing in response to the development of an overpressurised subglacial meltwater system during drumlin formation: an example from Anglesey,NW Wales

This paper presents the results of a detailed study of a complex hydrofracture system and host diamictons exposed within a longitudinal section through an elongate drumlin located to the west of Cemlyn Bay, Anglesey, NW Wales. This complex, laterally extensive sand, silt and clay filled hydrofracture system was active over a prolonged period and is thought to have developed beneath the Late Devensian (Weichselian) Irish Sea Ice Stream as it overrode this part of NW Anglesey. The sediment-fill to the hydrofracture system is deformed with kinematic indicators (folds, thrusts, augen) recording a SW-directed sense of shear, consistent with the regional ice flow direction across this part of the island. The lack of any geomorphological evidence for active retreat of the Irish Sea ice across Anglesey has led to the conclusion that hydrofracturing at the Cemlyn Bay site occurred within the bed of the Irish Sea Ice Stream whilst this relatively faster flowing corridor of ice was actively overriding the island. Shear imposed by the overriding ice led to the development of a subglacial shear zone which facilitated the propagation of the hydrofracture system with the laterally extensive feeder sills occurring parallel to Y-type Riedel shears. Although a subglacial setting beneath the active Irish Sea Ice Stream can be argued for the Cemlyn Bay hydrofracture system, its relationship to the formation of the ‘host’ drumlin remains uncertain. However, evidence presented here suggests that hydrofracturing may have occurred during the later stages or post landform development in response to the migration of overpressurised meltwater within the bed of the Irish Sea ice; possibly accompanying the local thinning and shutdown of the Irish Sea Ice Stream on Anglesey.     

The Eltanin asteroid impact: possible South Pacific palaeomegatsunami footprint and potential implications for the Pliocene–Pleistocene transition

Large asteroid impacts are rare, and those into the deep ocean are rarer still. The Eltanin asteroid impact around 2.51 ± 0.07 Ma occurred at a time of great climatic and geological change associated with the Pliocene–Pleistocene boundary. Numerical models of the event indicate that a megatsunami was generated, although there is debate concerning its magnitude and the region‐wide extent of its influence. We summarise the existing evidence for possible Eltanin megatsunami deposits in Antarctica, Chile and New Zealand, while also examining other potential sites from several locations, mainly around the South Pacific region. In reviewing these data we note that these events were unfolding at the same time as those associated with the Pliocene–Pleistocene boundary and, as such, most of the geological evidence from that time has a climatic interpretation. The potential climatic and geological ramifications of the Eltanin asteroid impact, however, have failed to be considered by most researchers studying this time period. Although we are not advocating that all geological activity at that time is connected with the Eltanin asteroid impact, it raises interesting questions about the role potentially played by such catastrophic events in contributing to or even triggering epochal transitions. Copyright © 2012 John Wiley & Sons, Ltd.     

The future relevance of medical geography for health planning,health and development in the third world

Conclusions: the Future Relevance of Medical Geography in the Third World This article has deliberately ranged widely and suggested various research themes to which medical geographers interested in health and development might turn their attention. The International Geographical Union Commission on Health and Development established in 1988 suggested a research agenda which includes many of them (see IGU Commission on Health and Development, Circular Letter No. 1 published in GeoJournal 17, 4, 659–660 (1988)). The achievement of even part of such an agenda will call for close international collaboration in research amongst medical geographers and allied disciplines.Increasingly, medical geographers are gaining applied experience in health and health care in the developing world. They are obtaining breadth and depth of knowledge and are now, for example, cogniscant of financial matters such as those involved in the cost explosion in health care worlwide which has particularly sinister implications for the health of Third World countries (Josephg and Phillips 1984). They, too, are now increasingly comfortable in dealing with epidemiological and demographic data. Geographers now no longer focus solely on phenomena such as distance decay or environments for disease. They are aware that human resources, intelligence, aspirations, attitudes and finance are all potent variables influencing successful health care and health in populations.In the future, therefore, the wide-ranging ambit of medical geography will increasingly become relevant to health and health care research in the Third World. Contributions of value will emerge both from those geographers adopting more socio-political stances and those adopting a more empiricist approach. However, it is the holistic nature of geography, with its wide academic links, and the courage of geographers to research in new topics and gain sound understanding of them which will increasingly be recognized. The days of extempore contributions to political, policy and practical debates on health and development are now largely past. Well researched, solid and sound medical geography contributions will, it is hoped, forge ahead.     

Electrical conductivity of orthopyroxene and plagioclase in the lower crust

The electrical conductivities of lower crustal orthopyroxene and plagioclase, as well as their dependence on water content, were measured at 6–12 kbar and 300–1,000°C on both natural and pre-annealed samples prepared from fresh mafic xenolith granulites. The complex impedance was determined in an end-loaded piston cylinder apparatus by a Solarton-1260 Impedance/Gain Phase analyzer in the frequency range of 0.1–10⁶ Hz. The spectra usually show an arc over the whole frequency range at low temperature and an arc plus a tail in the high and low frequency range, respectively, at high temperature. The arc is due to conduction in the sample interior, while the tails are probably due to electrode effects. Different conduction mechanisms have been identified under dry and hydrous conditions. For the dry orthopyroxene, the activation enthalpy is ~105 kJ/mol, and the conduction is likely due to small polarons, e.g., electrons hopping between Fe²⁺ and Fe³⁺. For the dry plagioclase, the activation enthalpy is ~161 kJ/mol, and the conduction may be related to the mobility of Na⁺. For the hydrous samples, the activation enthalpy is ~81 kJ/mol for orthopyroxene and ~77 kJ/mol for plagioclase, and the electrical conductivity is markedly enhanced, probably due to proton conduction. For each mineral, the conductivity increases with increasing water content, with an exponent of ~1, and the activation enthalpies are nearly independent of water content. Combining these data with our previous work on the conductivity of lower crustal clinopyroxene, the bulk conductivity of lower crustal granulites is modeled, which is usually >~10⁻⁴ S/m in the range of 600–1,000°C. We suggest that the high electrical conductivity in most regions of the lower crust, especially where it consists mostly of granulites, can be explained by the main constitutive minerals, particularly if they contain some water. Contributions from other highly conducting materials such as hydrous fluids, melts, or graphite films are not strictly necessary to explain the observed conductivities.     

Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.     

Static compression of α-MnS at 298 K to 21 GPa

To investigate the equation of state of -MnS at high pressure and the possibility of a phase transition, the compression curve was measured at 298 K from 0 to 21 GPa using powder x-ray diffraction with a diamond anvil cell. The compression data are fit to a thirdorder Birch-Murnaghan equation of state, with parameters K ₀ = 72(2) GPa and K ₀ = 4.2(13). To compare present results with previous work, the data sets from three previous investigations (Clendenen and Drickamer 1966; Wakabayashi et al. 1968; Kraft and Greuling 1988) are refit to a Birch-Murnaghan equation of state. In the low pressure region (P < 10=" gpa),=" the=" results=" of=" clendenen=" and=" drickamer=" (1966)=" agree=" with=" the=" present=" data;=" however=" the=" results=" of=" wakbayashi=" et=" al.=" (1968)=" differ=" by=" more=" than=" 10%.=" a=" greater=" discrepancy=" between=" the=" present=" and=" previous=" results=" occurs=" above=" 10=" gpa.=" kraft=" and=" greuling=" (1988)=" reported=" a=" structure=" transition=" at=" 7=" gpa,=" and=" clendenen=" and=" drickamer=" (1966)=" observed=" a=" structure=" distortion=" at=" approximately=" 10=" gpa;=" the=" present=" data=" show=" no=" evidence=" of=" either=" transition,=" and=" are=" well=" fit=" by=" a=" single=" equation=" of=" state=" from=" 0=" to=" 21=" gpa.=" nonhydrostatic=" stress=" is=" discussed=" as=" one=" possibility=" for=" the=">     

Delineating and defining the boundaries of an active landslide in the rainforest of Puerto Rico using a combination of airborne and terrestrial LIDAR data

Light detection and ranging (LIDAR) is a remote sensing technique that uses light, often using pulses from a laser to measure the distance to a target. Both terrestrial- and airborne-based LIDAR techniques have been frequently used to map landslides. Airborne LIDAR has the advantage of identifying large scarps of landslides covered by tree canopies and is widely applied in identifying historical and current active landslides hidden in forested areas. However, because landslides naturally have relatively small vertical surface deformation in the foot area, it is practically difficult to identify the margins of landslide foot area with the limited spatial resolution (few decimeters) of airborne LIDAR. Alternatively, ground-based LIDAR can achieve resolution of several centimeters and also has the advantages of being portable, repeatable, and less costly. Thus, ground-based LIDAR can be used to identify small deformations in landslide foot areas by differencing repeated terrestrial laser scanning surveys. This study demonstrates a method of identifying the superficial boundaries as well as the bottom boundary (sliding plane) of an active landslide in National Rainforest Park, Puerto Rico, USA, using the combination of ground-based and airborne LIDAR data. The method of combining terrestrial and airborne LIDAR data can be used to study landslides in other regions. This study also indicates that intensity and density of laser point clouds are remarkably useful in identifying superficial boundaries of landslides.     

The recognition of former melt flux through high‐strain zones

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.     

Celestite formation, bacterial sulphate reduction and carbonate cementation of Eocene reefs and basinal sediments (Igualada, NE Spain)

Petrographic and geochemical studies of an Upper Eocene reef and associated basinal sediments from the mixed carbonate–siliciclastic fill of the south‐eastern Pyrenean foreland basin near Igualada (NE Spain) provide new insights into the evolution of subsurface hydrology during the restriction of a marine basin. The reef deposits are located on delta‐lobe sandstones and prodelta marls, which are overlain by hypersaline carbonates and Upper Eocene evaporites. Authigenic celestite (SrSO₄) is an important component in the observed diagenetic sequences. Celestite is a significant palaeohydrological indicator because its low solubility constrains transportation of Sr²⁺ and SO₄^2? in the same diagenetic fluid. Stable isotopic analyses of carbonates in the reef indicate that meteoric recharge was responsible for aragonite stabilization and calcite cementation. Sulphur and oxygen isotope geochemistry of the celestite demonstrates that it formed from residual sulphate after bacterial sulphate reduction, but also requires that there was a prior episode of sulphate recycling. Meteoric water reaching the reef and basinal areas was most probably charged with SO₄^2? from the dissolution of younger Upper Eocene marine evaporites. This sulphate, combined with organic matter present in the sediments, fuelled bacterial sulphate reduction in the meteoric palaeoaquifer. Strontium for celestite precipitation was partly derived in situ from dissolution of aragonite corals in the reef and basinal counterparts. However, ⁸⁷Sr/⁸⁶Sr data also suggest that Sr²⁺ was partly derived from dissolution of overlying evaporites. Mixing of these two fluids promoted celestite formation. The carbonate stable isotopic data suggest that the local meteoric water was enriched in ¹⁸O compared with that responsible for stabilization of other reefs along the basin margin. Furthermore, meteoric recharge at Igualada post‐dated evaporite deposition in the basin, whereas other parts of the same reef complex were stabilized before evaporite formation. This discrepancy resulted from the spatial distribution of continental siliciclastic units that acted as groundwater conduits.     

Contrasting modes of eclogite and blueschist exhumation in a retreating subduction system: The Tasmanides,Australia

Blueschists and eclogites located in the Tasmanides of eastern Australia preserve evidence of contrasting modes of exhumation. A review of structural, metamorphic, geochronological and geochemical data indicates that these HP metamorphic rocks can be sub-divided into three main groups: (i) eclogite–blueschists with calc-alkaline and tholeiitic affinities contained within thick sedimentary sequences (called continental HP rocks); (ii) moderate-pressure (< 9 kbar) blueschist of arc to MORB-type composition within sedimentary or serpentinite mélange zones (called accretionary HP rocks) and (iii) eclogites of MORB-type composition with or without a pervasive blueschist overprint contained within serpentinite (called exotic HP rocks). Three different modes of exhumation can be ascribed to the different rock types, namely: (i) exhumation influenced by the buoyancy of continental slabs; (ii) exhumation of accretionary HP rocks by corner flow and/or extensional collapse in the accretionary wedge or (iii) discontinuous exhumation of eclogites triggered by slab rollback and trench retreat. We suggest that a dominant west-dipping, eastward migrating subduction zone can explain the distribution and formation of HP metamorphic rocks in the Tasmanides.Thermobarometric and geochronological data from eclogites and blueschists in the Peel–Manning Fault System (New England Orogen) also provide evidence for discontinuous exhumation of subducted oceanic rocks. These data indicate that eclogites were exhumed from depths of ~ 70 km to ~ 30 km during the Ordovician (490–470 Ma), with terminal exhumation and exposure along the Peel–Manning Fault system probably occurring during the Permian. Based on these timing constraints, we suggest a model where HP rocks reside between depth-dependant exhumation circuits for considerable lengths of time.