Electrical resistance sensors record spring flow timing, Grand Canyon, Arizona

Springs along the south rim of the Grand Canyon, Arizona, are important ecological and cultural resources in Grand Canyon National Park and are discharge points for regional and local aquifers of the Coconino Plateau. This study evaluated the applicability of electrical resistance (ER) sensors for measuring diffuse, low-stage (<1.0 cm) intermittent and ephemeral flow in the steep, rocky spring-fed tributaries of the south rim. ER sensors were used to conduct a baseline survey of spring flow timing at eight sites in three spring-fed tributaries in Grand Canyon. Sensors were attached to a nearly vertical rock wall at a spring outlet and were installed in alluvial and bedrock channels. Spring flow timing data inferred by the ER sensors were consistent with observations during site visits, with flow events recorded with collocated streamflow gauging stations and with local precipitation gauges. ER sensors were able to distinguish the presence of flow along nearly vertical rock surfaces with flow depths between 0.3 and 1.0 cm. Laboratory experiments confirmed the ability of the sensors to monitor the timing of diffuse flow on impervious surfaces. A comparison of flow patterns along the stream reaches and at springs identified the timing and location of perennial and intermittent flow, and periods of increased evapotranspiration.     

Late Pleistocene and Early Holocene lake‐level fluctuations in the Lahontan Basin,Nevada: Implications for the distribution of archaeological sites

The Great Basin of the western U.S. contains a rich record of Late Pleistocene and Holocene lake‐level fluctuations as well as an extensive record of human occupation during the same time frame. We compare spatial‐temporal relationships between these records in the Lahontan basin to consider whether lake‐level fluctuations across the Pleistocene‐Holocene transition controlled distribution of archaeological sites. We use the reasonably well‐dated archaeological record from caves and rockshelters as well as results from new pedestrian surveys to investigate this problem. Although lake levels probably reached maximum elevations of about 1230–1235 m in the different subbasins of Lahontan during the Younger Dryas (YD) period, the duration that the lakes occupied the highest levels was brief. Paleoindian and Early Archaic archaeological sites are concentrated on somewhat lower and slightly younger shorelines (_1220–1225 m) that also date from the Younger Dryas period. This study suggests that Paleoindians often concentrated their activities adjacent to large lakes and wetland resources soon after they first entered the Great Basin. © 2008 Wiley Periodicals, Inc.     

The Fernow Experimental Forest,West Virginia,USA: Insights,datasets, and opportunities

Long-term experimental watershed studies have significantly influenced our global understanding of hydrological processes. The discovery and characterization of how stream water quantity and quality respond to a changing environment (e.g. land-use change, acidic deposition) has only been possible due to the establishment of catchments devoted to long-term study. One such catchment is the Fernow Experimental Forest (FEF) located in the headwaters of the Appalachian Mountains in West Virginia, a region that provides essential freshwater ecosystem services to eastern and mid-western United States communities. Established in 1934, the FEF is among the earliest experimental watershed studies in the Eastern United States that continues to address emergent challenges to forest ecosystems, including climate change and other threats to forest health. This data note describes available data and presents some findings from more than 50 years of hydrologic research at the FEF. During the first few decades, research at the FEF focused on the relationship between forest management and hydrological processes—especially those related to the overall water balance. Later, research included the examination of interactions between hydrology and soil erosion, biogeochemistry, N-saturation, and acid deposition. Hydro-climatologic and water quality datasets from long-term measurements and data from short-duration studies are publicly available to provide new insights and foster collaborations that will continue to advance our understanding of hydrology in forested headwater catchments. As a result of its rich history of research and abundance of long-term data, the FEF is positioned to continue to advance understanding of forest ecosystems in a time of unprecedented change.     

Seasonal dynamics of water and nutrient fluxes in an agricultural peatland

The American cranberry (Vaccinium macrocarpon Ait.) is an important part of the cultural heritage and economy of Southeastern Massachusetts, yet water quality concerns and wetland protection laws challenge its commercial production. Here, we report inputs and outputs of water, nitrogen (N), and phosphorus (P) for a 2.12‐ha cranberry bed over a 2‐year period from 2013 to 2015. Water‐budget analysis indicated that precipitation contributed 40%, floodwater 37%, irrigation 15%, and groundwater 8% of water inputs to the cranberry bed. Minor annual variation in surface water discharge (~90 mm·year^?1 or 3%) contrasted with large decreases in net (= outputs ? inputs) nutrient export, from 16.2 to 9.1 kg N·ha^?1·year^?1 for total (dissolved + suspended particulate) nitrogen (TN) and from 3.34 to 1.47 kg P·ha^?1·year^?1 for total phosphorus (TP) between Years 1 and 2. Annual variation in net TN and TP export was tied to decreases in spring and summer nutrient export and controlled by the combined effects of fertilizer management, soil biogeochemistry, and hydrology. The relatively high spring TN export in Year 1 was associated with coincident increases in soil temperature and rainfall. A second factor was the timing of fertilizer application, which occurred 1 day prior to a major summer storm (i.e., third largest daily rainfall since 1926) and was responsible for up to 15% and 9% of the Year 1 TN and TP export, respectively. Nutrient budgets, which balanced water and fertilizer inputs with water, fruit, and vegetative outputs, were consistent with the burial of 21.6 kg N·ha^?1·year^?1 and 7.27 kg P·ha^?1·year^?1. Field measurements indicated that burial would increase TN and TP in the shallow (0–5 cm) rooting zone by 14% and 6%, respectively, which seemed plausible based on the relatively young age of the bed (4–5 years) and new root growth patterns in Vaccinium plants.     

Laboratory Study of Air Sparging of TCE-Contaminated Saturated Soils and Ground Water

Air sparging has proven to be an effective remediation technique for treating saturated soils and ground water contaminated by volatile organic compounds (VOCs). Since little is known about the system variables and mass transfer mechanisms important to air sparging, several researchers have recently performed laboratory investigations to study such issues. This paper presents the results of column experiments performed to investigate the behavior of dense nonaqueous phase liquids (DNAPFs). specifically trichloroethylene (TCE), during air sparging. The specific objectives of the study were (1) to compare the removal of dissolved TCE with the removal of dissolved light nonaqueous phase liquids (LNAPLs). such as benzene or toluene; (2) to determine the effect of injected air-flow rate on dissolved TCE removal; (3) to determine the effect of initial dissolved TCE concentration on removal efficiency; and (4) to determine the differences in removal between dissolved and pure-phase TCE. The test results showed that (1) the removal of dissolved TCE was similar to that of dissolved LNAPL: (2) increased air-injection rates led to increased TCE removal at lower ranges of air injection, but further increases at higher ranges of air injection did not increase the rate of removal, indicating a threshold removal rate had been reached; (3) increased initial concentration of dissolved TCE resulted in similar rates of removal: and (4) the removal of pure-phase TCE was difficult using a low air-injection rate, but higher air-injection rates led to easier removal.     

Petrophysics and mineral exploration: a workflow for data analysis and a new interpretation framework

As mineral exploration seeks deeper targets, there will be a greater reliance on geophysical data and a better understanding of the geological meaning of the responses will be required, and this must be achieved with less geological control from drilling. Also, exploring based on the mineral system concept requires particular understanding of geophysical responses associated with altered rocks. Where petrophysical datasets of adequate sample size and measurement quality are available, physical properties show complex variations, reflecting the combined effects of various geological processes. Large datasets, analysed as populations, are required to understand the variations. We recommend the display of petrophysical data as frequency histograms because the nature of the data distribution is easily seen with this form of display. A petrophysical dataset commonly contains a combination of overlapping sub-populations, influenced by different geological factors. To understand the geological controls on physical properties in hard rock environments, it is necessary to analyse the petrophysical data not only in terms of the properties of different rock types. It is also necessary to consider the effects of processes such as alteration, weathering, metamorphism and strain, and variables such as porosity and stratigraphy. To address this complexity requires that much more supporting geological information be acquired than in current practice. The widespread availability of field portable instruments means quantitative geochemical and mineralogical data can now be readily acquired, making it unnecessary to rely primarily on categorical rock classification schemes. The petrophysical data can be combined with geochemical, petrological and mineralogical data to derive explanations for observed physical property variations based not only on rigorous rock classification methods, but also in combination with quantitative estimates of alteration and weathering. To understand how geological processes will affect different physical properties, it is useful to define three end-member forms of behaviour. Bulk behaviour depends on the physical properties of the dominant mineral components. Density and, to a lesser extent, seismic velocity show such behaviour. Grain and texture behaviour occur when minor components of the rock are the dominate controls on its physical properties. Grain size and shape control grain properties, and for texture properties the relative positions of these grains are also important. Magnetic and electrical properties behave in this fashion. Thinking in terms of how geological processes change the key characteristics of the major and minor mineralogical components allows the resulting changes in physical properties to be understood and anticipated.