Distribution of benthic flora in the lower course of the Valdivia River,Chile

The Valdivia River (Lake Region, Chile) originates in Riñihue Lake and flows into the sea at Corral Bay (39°52′S latitude), changing names several times along its course. The aquatic benthic flora (algae and aquatic plants) of the Valdivia River was characterized, based on 22 sites sampled and 124 plant species collected. Four benthic vegetation zones were established using presence-absence data: a freshwater zone and a marine zone were found at the extremes of the transect; an estuarine zone and a discontinuity zone were detected in the middle of this transect. The freshwater zone was characterized by a relatively diverse assemblage of vascular plants, the marine zone was dominated by algae and was rich in species. By contrast the estuarine zone was inhabited by only a few species but in great abundance, while the discontinuity zone was poor, in species and low in cover vegetation.     

High-dimensional geostatistical history matching

Hydrocarbon reservoir modelling and characterisation is a challenging subject within the oil and gas industry due to the lack of well data and the natural heterogeneities of the Earth’s subsurface. Integrating historical production data into the geo-modelling workflow, commonly designated by history matching, allows better reservoir characterisation and the possibility of predicting the reservoir behaviour. We present herein a geostatistical-based multi-objective history matching methodology. It starts with the generation of an initial ensemble of the subsurface petrophysical property of interest through stochastic sequential simulation. Each model is then ranked according the match between its dynamic response, after fluid flow simulation, and the observed available historical production data. This enables building regionalised Pareto fronts and the definition of a large ensemble of optimal subsurface Earth models that fit all the observed production data without compromising the exploration of the uncertainty space. The proposed geostatistical multi-objective history matching technique is successfully implemented in a benchmark synthetic reservoir dataset, the PUNQ-S3, where 12 objectives are targeted.     

Finite element simulations of logging-while-drilling and extra-deep azimuthal resistivity measurements using non-fitting grids

We propose a discretization technique using non-fitting grids to simulate magnetic field-based resistivity logging measurements. Non-fitting grids are convenient because they are simpler to generate and handle than fitting grids when the geometry is complex. On the other side, fitting grids have been historically preferred because they offer additional accuracy for a fixed problem size in the general case. In this work, we analyse the use of non-fitting grids to simulate the response of logging instruments that are based on magnetic field resistivity measurements using 2.5D Maxwell’s equations. We provide various examples demonstrating that, for these applications, if the finite element matrix coefficients are properly integrated, the accuracy loss due to the use of non-fitting grids is negligible compared to the case where fitting grids are employed.     

Influence of the sediment delivery ratio index on the analysis of silting and break risk in the Plasencia reservoir (Central System,Spain)

The random forest method was used to generate susceptibility maps for debris flows, rock slides, and active layer detachment slides in the Donjek River area within the Yukon Alaska Highway Corridor, based on an inventory of landslides compiled by the Geological Survey of Canada in collaboration with the Yukon Geological Survey. The aim of this study is to develop data-driven landslide susceptibility models which can provide information on risk assessment to existing and planned infrastructure. The factors contributing to slope failure used in the models include slope angle, slope aspect, plan and profile curvatures, bedrock geology, surficial geology, proximity to faults, permafrost distribution, vegetation distribution, wetness index, and proximity to drainage system. A total of 83 debris flow deposits, 181 active layer detachment slides, and 104 rock slides were compiled in the landslide inventory. The samples representing the landslide free zones were randomly selected. The ratio of landslide/landslide free zones was set to 1:1 and 1:2 to examine the results of different sample ratios on the classification. Two-thirds of the samples for each landslide type were used in the classification, and the remaining 1/3 were used to evaluate the results. In addition to the classification maps, probability maps were also created, which served as the susceptibility maps for debris flows, rock slides, and active layer detachment slides. Success and prediction rate curves created to evaluate the performance of the resulting models indicate a high performance of the random forest in landslide susceptibility modelling.     

Toxic metals in a highly urbanized industry-impacted estuary (Bahia Blanca Estuary,Argentina): spatio-temporal analysis based on GIS

Cadmium, chromium, nickel, and lead were evaluated in the particulate fraction at one of the most industrialized estuaries at the Southwestern Atlantic Ocean, through Geographic Information System (GIS). Concentrations were analyzed at 21 stations during 2008–2010. The highest metal concentrations (Cd: 8,9; Cr: 256,49; Ni: 27,02; Pb: 78,43 µg g^??1 d. w.) were recorded at the stations located near industrial and urban discharges situated along the estuary. In addition, Pb presented a different seasonal and spatial behavior in comparison with Cd, Cr and Ni. Winter and spring presented the higher concentrations of Pb, and the inner stations presented the higher values. The estuary is considered a moderate to strongly polluted and significantly polluted according to the Index of geoaccumulation (I_geo) and the Enrichment Factor of Cd, respectively. The Multidimensional Scaling plot showed three groups of stations: the inner, associated to low levels of metals (G1), middle stations (G2) with intermediate levels and the outer (G3) with the highest ones. In addition, this work reveals the usefulness of the GIS-mapping techniques in the distribution of pollutants along an estuarine environment and the environmental quality assessment of estuarine systems.     

Groundwater characteristics within loessic deposits: the coastal springs of Los Acantilados,Mar del Plata,Argentina

The urban growth of the southern neighborhoods of Mar del Plata City provoked significant changes in the groundwater balance of the loessic sequences. These regional loessic levels with a significant portion of volcanic ash layers were reported subject to fluoride and nitrate concentrations. Residential houses pump from sands located 70 m depth and withdraw the sewages to depths less than 5 m. These effects cause significant local and seasonal (summer) increments of the water table outcropping via springs at certain unconformities of the coastal cliffs. A mathematical model was applied to analyze the water level lowering at the productive levels, while there is a decrease in the quality of the upper levels subject to waste discharges. Much of this groundwater flow is concentrated in unconformities between different types of sediments. Human activities have affected the aquifer dynamics increasing the groundwater pumping rates and the return velocity of the sewages. This should be considered in the management strategies of coastal hydric resources.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Assessment of the acid drainage neutralization capacity and the toxic metals lixiviation of tailing from Guanajuato mining district,Mexico

In Mexico, many environmental problems are generated by large mining activities taking place in several mining districts. These mining activities produce great quantities of residues; large majorities of these have high sulfur content, which could generate acid drainage due to their interaction with the oxygen in the environment. The study area was located in the Mining District of Guanajuato, Mexico with abandoned tailings generated mainly by the gold and silver production. Two areas, called as Monte de San Nicolás (SN) and Peregrina (P) were selected for this study. The results study shows that there was no risk of production of acid drainage, since these tailings contained high amount of carbonates, which neutralized the generation of acidity and consequently decreased the possibility of leaching of some elements. However, not all elements leach in acid pH, as arsenic bound to oxyhydroxides, which is in a basic environment and its increased release by increasing the pH.     

Zircon geochronology and geochemistry to constrain the youngest eruption events and magma evolution of the Mid-Miocene ignimbrite flare-up in the Pannonian Basin,eastern central Europe

A silicic ignimbrite flare-up episode occurred in the Pannonian Basin during the Miocene, coeval with the syn-extensional period in the region. It produced important correlation horizons in the regional stratigraphy; however, they lacked precise and accurate geochronology. Here, we used U–Pb (LA-ICP-MS and ID-TIMS) and (U–Th)/He dating of zircons to determine the eruption ages of the youngest stage of this volcanic activity and constrain the longevity of the magma storage in crustal reservoirs. Reliability of the U–Pb data is supported by (U–Th)/He zircon dating and magnetostratigraphic constraints. We distinguish four eruptive phases from 15.9 ± 0.3 to 14.1 ± 0.3 Ma, each of which possibly includes multiple eruptive events. Among these, at least two large volume eruptions (>10 km³) occurred at 14.8 ± 0.3 Ma (Demjén ignimbrite) and 14.1 ± 0.3 Ma (Harsány ignimbrite). The in situ U–Pb zircon dating shows wide age ranges (up to 700 kyr) in most of the crystal-poor pyroclastic units, containing few to no xenocrysts, which implies efficient recycling of antecrysts. We propose that long-lived silicic magma reservoirs, mostly kept as high-crystallinity mushes, have existed in the Pannonian Basin during the 16–14 Ma period. Small but significant differences in zircon, bulk rock and glass shard composition among units suggest the presence of spatially separated reservoirs, sometimes existing contemporaneously. Our results also better constrain the time frame of the main tectonic events that occurred in the Northern Pannonian Basin: We refined the upper temporal boundary (15 Ma) of the youngest counterclockwise block rotation and the beginning of a new deformation phase, which structurally characterized the onset of the youngest volcanic and sedimentary phase.     

Hydrogeochemistry of fluoride in the Quequen river basin: natural pollutants distribution in the argentine pampa

Fluoride pollution is a widespread problem in Argentina, as it is in many areas of the World. Former investigations have demonstrated that the dissolution of volcanic glass disseminated in the loess-like sediments is the main source of fluoride in the Argentine pampas. Nevertheless, fluoride distribution is erratic and the factors controlling it are not yet well-known. A large amount of hydrochemical data collected in the Quequen Grande river catchment is used in order to contribute to the understanding of fluoride distribution and mobility in groundwater in the Argentine pampas. The Quequen Grande river catchment is 10,000 km². It extends between two low hills ranges of Precambrian metamorphic rocks and sedimentary Paleozoic rocks, filled by a thick sequence of Cenozoic sediments, mainly silts and silt-clayed, with sand layers. These sediments form a multilayer phreatic aquifer, which is recharged from precipitation infiltration, discharging through streams directly into the sea. Fluoride concentration in surface water (n = 353) ranges between 0 and 6.5 mg/l, with an average value of 2.14 mg/l. Groundwater concentration (n = 135) is from 0 up to 5.7 mg/l, with an average of 1.84 mg/l. Considering the statistic distribution of fluoride, two groups of samples can be determined. A dominant group between 0 and 3 mg/l, with a mean value around 1.5 mg/l, corresponding to samples widely distributed in the catchment; and a second one group with fluoride contents between 3 and 6 mg/l, corresponding to a smaller area in the central-west border. Two different sources are proposed. Volcanic glass dissolution is responsible for dominant values in the catchment, while the weathering of biotite from the Paleozoic bedrock can be assumed to account for the higher concentrations in the second group.