Dispersal of natural and anthropogenic lead through submarine canyons at the Portuguese margin

Submarine canyons represent natural conduits for preferential transport of particulate material, including anthropogenic contaminants, from coastal zones directly to the deep sea. To assess related dispersal of natural and anthropogenic lead (Pb), we analyzed Pb concentrations and stable isotope ratios in surface sediments and sediment trap particulate material from the Portuguese margin Nazaré and Setúbal/Lisbon canyons. Geochemical data are integrated with previously obtained data on near-bottom hydrodynamics and processes and pathways of sediment transport. The two canyon systems are located in close geographic proximity to each other, but represent contrasting settings in terms of sediment input and down-canyon sediment transport processes.Concentration–isotope diagrams and three-isotope plots (²⁰⁶Pb/²⁰⁷Pb vs. ²⁰⁸Pb/²⁰⁶Pb) suggest binary mixing between natural and anthropogenic end members. The inferred isotopic signature of pollutant Pb (²⁰⁶Pb/²⁰⁷Pb=1.143 [1.134–1.149, 95% confidence interval]) is most consistent with industrial Pb; ongoing influence from gasoline Pb additives is at most of minor importance. Two proposed natural end members most likely bracket the isotopic signature of natural Pb. Accordingly, binary mixing calculations indicate that on average 20–45% vs. 35–55% of total Pb is derived from anthropogenic sources in the Nazaré and Setúbal–Lisbon canyon systems, respectively. Enhanced anthropogenic influence in the latter area is consistent with its proximity to heavily populated and industrialized areas and with sediment input from the Tagus and Sado rivers, potential major carriers of pollutant particles. In both canyon systems, the anthropogenic component generally decreases with increasing water depth.Isotopic signatures of sediment trap particulate material are generally consistent with surface sediment data at similar water depth, but show large variability in the upper Nazaré canyon and major deviations from surface sediments in the lower canyon. In the lower canyon, Pb isotopic ratios of sediment trap particulate material mostly reflect low pelagic fluxes from the overlying water column, whereas surface sediment signatures are dominated by episodic down-canyon mass transport events. Such gravity flows appear to incorporate older (pre-industrial) material masking the isotopic signature of pollutant Pb. Large variability in the upper canyon reflects continuous sediment resuspension by bottom currents. Stronger average bottom currents are associated with higher ²⁰⁶Pb/²⁰⁷Pb ratios of sediment trap particulate material and hence decreased influence of pollutant Pb. This may reflect preferential resuspension of natural Pb at the canyon floor and/or additional remobilization of older, less-polluted sediment in adjacent areas such as the canyon walls.     

Shock barometry of the Siljan impact structure,Sweden

Abstract– The Siljan impact structure in Sweden is the largest confirmed impact structure in Western Europe. Despite this, the structure has been poorly studied in the past, and detailed studies of shock metamorphic features in the target lithologies are missing. Here, we present the results of a detailed systematic search for shock metamorphic features in quartz grains from 73 sampled localities at Siljan. At 21 localities from an area approximately 20 km in diameter located centrally in the structure, the orientations of 2851 planar deformation feature sets in 1179 quartz grains were measured. Observations of shatter cones outside of the zone with shocked quartz extend the total shocked area to approximately 30 km in diameter. The most strongly shocked samples, recording pressures of up to 20 GPa, occur at the very central part of the structure, and locally in these samples, higher pressures causing melting conditions in the affected rocks were reached. Pressures recorded in the studied samples decrease outwards from the center of the structure, forming roughly circular envelopes around the proposed shock center. Based on the distribution pattern of shocked quartz at Siljan, the original transient cavity can be estimated at approximately 32–38 km in diameter. After correcting for erosion, we conclude that the original rim to rim diameter of the Siljan crater was somewhere in the size range 50–90 km.     

A 3‐D study of mineral inclusions in chromite from ordinary chondrites using synchrotron radiation X‐ray tomographic microscopy—Method and applications

Abstract– A method is described for imaging in 3‐D the interiors of meteoritic chromite grains and their inclusions using synchrotron radiation X‐ray tomographic microscopy. In ordinary chondrites, chromite is the only common mineral that survives long‐term weathering on Earth. Information about the silicate matrix of the original meteorite, however, can be derived from mineral inclusions preserved in the protecting chromite. The inclusions are crucial in the classification of fossil meteorites as well as sediment‐dispersed chromite grains from decomposed meteorites and larger impacts, as these are used for characterizing the past influx of material to Earth, but have previously been difficult to locate. The method is non‐destructive and time efficient for locating inclusions. The method allowed quantitative and morphological studies of both host chromite grains and inclusions in three dimensions. The study of 385 chromite grains from eight chondrites (H4–6, L4–6, LL4, LL6) reveals that inclusions are abundant and equally common in all samples. Almost two‐thirds of all chromite grains contain inclusions, regardless of group and type. The study also shows that the size of the inclusions and the host chromite grains, as well as the number of inclusions, within the host chromite grains vary with petrographic type. Thus, the petrographic type of the host of a suite of chromite grains can be determined based solely on inclusion content. The study also revealed that the amount of fractures in the host chromite can be correlated to previously assigned shock stages for the various chondrites. The study has thus shown that the features and inclusions of fossil chromite grains can give similar information about a former host meteorite as do studies of an unweathered whole meteorite, meaning that this technique is essential in the studies of ancient meteorite flux to Earth.     

The lunar rock and mineral characterization consortium: Deconstruction and integrated mineralogical,petrologic, and spectroscopic analyses of mare basalts

The lunar rock and mineral characterization consortium (LRMCC) has conducted coordinated mineralogy/petrography/spectroscopy analyses of a suite of pristine lunar basalts. Four basalt slabs (two low‐Ti, two high‐Ti) and paired thin sections were analyzed. Thin sections were analyzed for mineralogy/petrography, while the slabs were used to prepare particulate separates of major mineral phases and bulk samples. Mineral separates and particulate bulk samples were crushed to controlled grain sizes and their reflectance spectra measured in the NASA RELAB at Brown University. The resulting data set provides an essential foundation for spectral mixing models, offers valuable endmember constraints for space weathering analyses, and represents critical new ground truth results for lunar science and exploration efforts.     

Near‐infrared spectra of clinopyroxenes: Effects of calcium content and crystal structure

Abstract– Pyroxenes are among the most common minerals in the solar system and are ideally suited for remote geochemical analysis because of the sensitivity of their distinctive spectra to mineral composition. Fe²⁺ is responsible for the dominant pyroxene absorptions in the visible and near‐infrared, but substitutions of other cations such as Ca²⁺ change the crystal structure and site geometries and thus the crystal field splitting energies of the Fe cations. To define spectral systematics resulting from major pyroxene cations (Ca²⁺, Mg²⁺, and Fe²⁺), we focus on a suite of pyroxenes synthesized with only Ca²⁺, Mg²⁺, and Fe²⁺ in the two octahedral sites, specifically examining the effect of Ca²⁺ on pyroxene absorption bands. The modified Gaussian model is used to deconvolve pyroxene spectra into component bands that can then be linked directly to crystal field absorptions. In orthopyroxenes and low‐Ca clinopyroxenes, Ca²⁺‐content has a strong and predictable effect on the positions of the absorption bands. At a threshold of Wo₃₀, the crystal field environment stagnates and the M2 bands cease to change significantly as more Ca²⁺ is added. At Wo₅₀, when most of the M2 sites are filled by Ca²⁺, band positions do not change drastically, although the presence and strengths of the 1 and 2 μm bands are affected by even trace amounts of Fe²⁺ in the M2 site. It is thus apparent that next‐nearest neighbors and the distortions they impose on the pyroxene lattice affect the electronic states around the Fe²⁺ cations and control absorption band properties.     

Evidence of space weathering in regolith breccias II: Asteroidal regolith breccias

Abstract– Space weathering products, such as agglutinates and nanophase iron‐bearing rims are easily preserved through lithification in lunar regolith breccias, thus such products, if produced, should be preserved in asteroidal regolith breccias as well. A study of representative regolith breccia meteorites, Fayetteville (H4) and Kapoeta (howardite), was undertaken to search for physical evidence of space weathering on asteroids. Amorphous or npFe⁰‐bearing rims cannot be positively identified in Fayetteville, although possible glass rims were found. Extensive friction melt was discovered in the meteorite that is difficult to differentiate from weathered materials. Several melt products, including spherules and agglutinates, as well as one irradiated rim and one possible npFe⁰‐bearing rim were identified in Kapoeta. The existence of these products suggests that lunar‐like space weathering processes are, or have been, active on asteroids.     

Early Devensian sediments and palaeovenvironmental evidence from the excavations at the Royal Oak Portal Paddington,West London,UK

This paper discusses the results of the investigation of Pleistocene sediments at the Royal Oak Portal (ROP) site on the new Crossrail scheme near Paddington Station, London. The site was sampled and recorded in May 2011 by archaeologists from Oxford Archaeology commissioned by Crossrail Ltd. The investigation revealed a sedimentary sequence associated with cool climate waterlain deposition towards the edge of the River Westbourne floodplain. During excavation an assemblage of around 100 identifiable large mammal bones was recovered, dating to the Late Pleistocene. The major concentration of bones, from bison and reindeer, was located and excavated from a shallow sequence of sediments. Analysis of the bones indicates that they represent a natural death assemblage, scavenged and subsequently disarticulated, transported by water, exposed and further dispersed and broken by trampling. The site is of regional and national importance because the assemblage derives from a well-constrained geological context, with associated dating evidence suggesting accumulation during the later parts of Marine Isotope Stage (MIS) 5 and continuing within MIS 4. The site is also of significance because it is one of a growing number of recently discovered sites away from the main fluvial archive for the British Middle and Upper Pleistocene. These sites have the potential to add significantly to our understanding of parts of the Pleistocene record that remain difficult to document through the investigation of the more active systems associated with major rivers such as the Thames, Severn or Trent.