Early J2 basalts in SE China: Incipience of large-scale late Mesozoic magmatism

Magmatism in SE China was dormant during 204–180 Ma, but was reactivated in 180–170 Ma (early J₂), and then became more and more intensive towards the end of early Cretaceous. The small-scale early J₂ magmatism is the incipience to long-term and large-scale magmatism in this region. A near east-west (EW) trend volcanic belt was distributed across south Hunan, south Jiangxi and southwest Fujian was formed during early J₂ time. Along this belt from the inland toward the coast, the lithology of basalts changes from alkali into tholeiite, and the amount of erupted volcanic rocks and the proportions of rhyolites coexisting with the basalts increase. On the basis of geochemical characteristics of these basalts, we infer that the melting degree of source rocks and the extent of fractional crystallization and crustal contamination all increased whereas the depth of mantle source decreased from the inland to the coast, which led to the variations of geological characteristics of the volcanic belt. In early J₂, the western spreading Pacific plate began to subduct underneath SE China continental block, reactivating near EW trend deep fault that was originally formed during the Indosinian event. The stress of the western spreading Pacific plate and the extent of asthenosphere upwelling increased from the inland to the coast, which is consistent with the generation and evolution of early J₂ basalts.     

Occurrence and characteristics of sporadic sodium layer observed by lidar at a mid-latitude location

Na lidar observations of SSL during the past 5 years at a mid-latitude location (Wuhan, China, 31°N, 114°E) are reported in this paper. From 26 SSL events detected in about 230 h of observation, an SSL occurrence rate of 1 event/9 h at our location was obtained. This result, combined with that reported by Nagasawa and Abo (Geophys. Res. Lett. 22 (1995) 263) at Tokyo, Japan, reveals that the SSL occurrence can be relatively frequent at some mid-latitude locations. The statistical analyses of main parameters for the 26 SSL events were made, and the results were compared with those previously reported. By examining the corresponding data from a nearby ionosonde, it was found that there was a fairly good correlation between SSL and Es. Of the 18 pairs of SSL and Es events checked, 15 of SSL were accompanied by Es, and 8 pairs of them were correlated within 1 h in time and within 5 km in altitude. From the analyses of observed perturbations during SSL development, the role of dynamic processes of atmosphere in the SSL formations were emphasized.     

Processes of initial collision and suturing between India and Asia

The initial collision between Indian and Asian continents marked the starting point for transformation of land-sea thermal contrast, uplift of the Tibet-Himalaya orogen, and climate change in Asia. In this paper, we review the published literatures from the past 30 years in order to draw consensus on the processes of initial collision and suturing that took place between the Indian and Asian plates. Following a comparison of the different methods that have been used to constrain the initial timing of collision, we propose that the tectono-sedimentary response in the peripheral foreland basin provides the most sensitive index of this event, and that paleomagnetism presents independent evidence as an alternative, reliable, and quantitative research method. In contrast to previous studies that have suggested collision between India and Asia started in Pakistan between ca. 55 Ma and 50 Ma and progressively closed eastwards, more recent researches have indicated that this major event first occurred in the center of the Yarlung Tsangpo suture zone (YTSZ) between ca. 65 Ma and 63 Ma and then spreading both eastwards and westwards. While continental collision is a complicated process, including the processes of deformation, sedimentation, metamorphism, and magmatism, different researchers have tended to define the nature of this event based on their own understanding, an intuitive bias that has meant that its initial timing has remained controversial for decades. Here, we recommend the use of reconstructions of each geological event within the orogenic evolution sequence as this will allow interpretation of collision timing on the basis of multidisciplinary methods.     

在我国东部沿海修建地下水封石洞油库若干问题的探讨

随着我国大陆架油、气田不断被发掘、开采,石油储运问题已指日可待。我国海岸线的基岩岸约占全长的2/3以上,其中,块状结晶岩体又占基岩岸的一半以上,这就给水封油库的布置提供了良好的基础。在油库的选择和兴建中,应加强对建库岩体和主要结构面、地应力及其分布的充分研究,以期能对洞库稳定问题、地下水位及水量的合理确定问题有所裨盖、     

钢筋混凝土框架结构耗能分析

本文从能量的观点,利用CANNY程序对普通钢筋混凝土框架结构进行了分析.通过对3种不同框架结构在不同地震动(31条)输入下的能量反应分析,研究了滞回耗能及阻尼耗能与总输入能的关系.针对本文模型的计算结果,给出了滞回耗能与总输入能关系的表达式,并初步探讨了其影响系数.研究表明,滞回耗能及阻尼耗能与总输入能之间有良好的线性关系.     

平湖油气田凝析油回注油藏对开发效果影响机理研究

凝析油回注油藏是平湖油气田开发过程中为应对海底输油管线而采取的一种工程应急措施。凝析油回注油藏会引起油层内流体渗流特征的变化，并进而影响油井恢复生产后的开发指标。从室内物理模拟实验和油藏数值模拟两方面开展凝析油回注油藏的影响效果分析，并根据研究结果提出合理的回注方式，不仅从机理上为解决海上油气田开发工程中所遇类似突发事件的处理提供了依据，而且在物理模拟实验和油藏数值模拟研究相结合对油藏基础研究方面提供一些重要的结论。     

青海东昆仑哈陇休玛钼多金属矿床成矿流体特征及成矿模式

哈陇休玛钼多金属矿床是东昆仑成矿带东段目前仅有的中型斑岩型矿床。为了查明其成矿流体性质及成矿物质来源,构建矿床成矿模式,本文进行了详细的流体包裹体和H-O-S同位素研究。流体包裹体显微测温显示,哈陇休玛矿床发育气液两相和含CO₂三相两种类型包裹体,成矿流体呈现中高温(集中于280～340℃)、高盐度(w(NaCl),集中于6.00%～18.00%)和中等密度(集中于0.64～0.92 g/cm³)特点,成矿深度为2.4～4.1 km,形成于中浅成环境。H-O同位素显示,成矿流体具有岩浆水和大气降水混合的特征,但主体以岩浆水为主;S同位素显示,成矿物质主要来自于深部岩浆。结合区域构造演化认为,哈陇休玛矿床成矿模式为印支晚期东昆仑地区发生强烈壳幔混合作用,形成富含成矿元素的混合岩浆,含矿流体在随混合岩浆上升的过程中发生流体沸腾,并与大气降水混合冷却,导致成矿物理化学条件发生变化,促使成矿物质沉淀成矿。     

南海夏季风爆发日期和强度的短期气候预测方法研究

利用合成及相关统计方法，研究冬季南海季风指数与850hPa风场、500hPa高度、海表温度、OLR等环境场的相互关系及其影响南海夏季风活动的可能机制。指出冬季南海季风指数及环境场的异常特征可以作为预测南海夏季风活动的前兆信号。在此基础上建立了预测南海夏季风爆发日期和强度的概念模型，1998－2001年的预测试验取得了较好成绩。     

桶形基础沉贯室内模型试验研究

桶形基础采用负压沉贯法施工,其贯入阻力与压桩,打桩等施工方法显著不同。本文介绍了在粉土和粉质粘土地层中的一组模型试验情况,认为负压法施工可显著降低粉土的抗贯阻力,但在粉质粘土中减阻效果不明显。     

Tests and applications of an approach to absorbing reflected waves towards incident boundary

If the upstream boundary conditions are prescribed based on the incident wave only, the time-dependent numerical models cannot effectively simulate the wave field when the physical or spurious reflected waves become significant. This paper describes carefully an approach to specifying the incident wave boundary conditions combined with a set sponge layer to absorb the reflected waves towards the incident boundary. Incorporated into a time-dependent numerical model, whose governing equations are the Boussinesq-type ones, the effectiveness of the approach is studied in detail. The general boundary conditions, describing the down-wave boundary conditions are also generalized to the case of random waves. The numerical model is in detail examined. The test cases include both the normal one-dimensional incident regular or random waves and the two-dimensional oblique incident regular waves. The calculated results show that the present approach is effective on damping the reflected waves towards the incident wave boundary.