A Numerical Investigation on Microphysical Properties of Clouds and Precipitation over the Tibetan Plateau in Summer 2014

In order to improve our understanding of microphysical properties of clouds and precipitation over the Tibetan Plateau (TP), six cloud and precipitation processes with different intensities during the Third Tibetan Plateau Atmospheric Science Experiment (TIPEX-Ⅲ) from 3 July to 25 July 2014 in Naqu region of the TP are investigated by using the high-resolution mesoscale Weather Research and Forecasting (WRF) model. The results show unique properties of summertime clouds and precipitation processes over the TP. The initiation process of clouds is closely associated with strong solar radiative heating in the daytime, and summertime clouds and precipitation show an obvious diurnal variation. Generally, convective clouds would transform into stratiform clouds with an obvious bright band and often produce strong rainfall in midnight. The maximum cloud top can reach more than 15 km above sea level and the velocity of updraft ranges from 10 to 40 m s-1. The simulations show high amount of supercooled water content primarily located between 0 and -20℃ layer in all the six cases. Ice crystals mainly form above the level of -20℃ and even appear above the level of -40℃ within strong convective clouds. Rainwater mostly appears below the melting layer, indicating that its formation mainly depends on the melting process of precipitable ice particles. Snow and graupel particles have the characteristics of high content and deep vertical distribution, showing that the ice phase process is very active in the development of clouds and precipitation. The conversion and formation of hydrometeors and precipitation over the plateau exhibit obvious characteristics. Surface precipitation is mainly formed by the melting of graupel particles. Although the warm cloud microphysical process has less direct contribution to the formation of surface precipitation, it is important for the formation of supercooled raindrops, which are essential for the formation of graupel embryos through heterogeneous freezing process. The growth of graupel particles mainly relies on the riming process with supercooled cloud water and aggregation of snow particles.     

同位素水化学指示的新疆孔雀河流域地下水与地表水关系

地下水是孔雀河流域农业灌溉的主要水源之一,其对本地区经济发展的支撑作用日益增强.为实现孔雀河流域水资源合理开发和生态保护,采用环境同位素和水化学方法,研究了孔雀河流域地下水与地表水关系.结果表明:地下水的主要补给来源为河水.含水层成因类型和现代河道分布共同控制着孔雀河流域地下咸淡水的空间分布格局;氢氧稳定同位素对不同水...     

基于神经网络的滑移隔震结构智能半主动控制

考虑上部结构的刚度和阻尼,使用神经网络控制算法计算基底摩擦力的大小,研究了滑移隔震结构的半主动控制。对计算实例的分析表明,通过半主动控制的滑移隔震结构不但具有较好的隔震效果,且能有效地减小基底的最大滑移量及残余位移。为对比各种控制方法的控制效果,文中还利用Bang-Bang控制和瞬时最优控制算法对滑移隔震结构进行了半主动控制。对比分析表明,基于神经网络控制算法的控制效果优于其它控制算法,具有反馈量少,稳健性强等特点。     

A new spatial coherence model and analytical coefficients for multi-support response spectrum combination

In this paper, a new spatial coherence model of seismic ground motions is proposed by a fi tting procedure. The analytical expressions of modal combination (correlation) coeffi cients of structural response are developed for multi-support seismic excitations. The coeffi cients from both the numerical integration and analytical solutions are compared to verify the accuracy of the solutions. It is shown that the analytical expressions of numerical modal combination coeffi cients are of high accuracy. The results of random responses of an example bridge show that the analytical modal combination coeff icients developed in this paper are accurate enough to meet the requirements needed in practice. In addition, the computational effi ciency of the analytical solutions of the modal combination coeff icients is demonstrated by the response computation of the example bridge. It is found that the time required for the structural response analysis by using the analytical modal combination coeffi cients is less than 1/20 of that using numerical integral methods.     

电性源瞬变电磁法的迭前和迭后数据小波分析

电性源瞬变电磁法用于深部勘探时,观测到的垂直磁场脉冲响应非常微弱,常伴有严重的干扰噪声,从噪声中提取反映深部地层的中、晚期磁场信号非常重要.为此提出将多分辨率小波分析应用于电性源瞬变电磁法数据分析,并对西部某勘探区垂直磁场响应的迭前和迭后教据作多尺度分解后进行分析和比较的结果表明:①小波分析对数据具有良好的时频局部化特性,垂直磁场响应的迭前和迭后记录在不同频段上的分布特征可以清晰地反映出来;②高频干扰主要反映于数据的分解细节,反映深部信息的中、晚期弱信号存在于分解概貌;③迭后记录加入随机噪声与不加入随机噪声的处理结果类似,而迭前记录则不同,迭前记录比迭后记录具有更丰富的信息,并主要表现在早期.在电性源瞬变电磁法深部勘探中,利用更多的迭前记录的小波分解概貌对资料处理的解释工作很有意义.     

基于地面激光扫描仪的隧道断面提取研究

近年来,将三维激光扫描技术应用于地铁变形监测成为研究的热点.面对海量点云数据,如何提取隧道断面是成功运用该技术的关键.据此,本文采用三维激光扫描技术扫描隧道,获取隧道整体点云数据,并提出一种获取隧道任意位置断面变形的新方法.以某地铁监测数据为例实验分析,提取隧道断面图,实验证明了该方法的有效性.     

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models: An Empirical Validation of ISWRidge Relationships

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p 〈0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to cheek the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height （X1 ） and potential energy （X2 ） significantly impact （p 〈 0. 0001 ） the amplitude-based refleeted rate; the P-values for the deviance and Pearson are all 〉 0.05 （0.2839, 0.3438, respectively）. That is, the goodness-of-fit between ridge height （ X1 ） and potential energy （X2） can further predict parameters under the scenario of the best parsimonious model. Investigation of 6 predictive powers （ R2, Max-rescaled R^2, Sorners＇ D, Gamma, Tau-a, and c, respectively） indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.     

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models： An Empirical Validation of ISW-Ridge Relationships

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers'D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.     

Non-specific immune response of bullfrog <Emphasis Type="Italic">Rana catesbeiana</Emphasis> to intraperitoneal injection of bacterium <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis>

Non-specific immune response of bullfrog Rana catesbeiana to pathogenic Aeromonas hydrophila was studied to 60 individuals in two groups. Each bullfrog in bacterium-injected group was injected intraperitoneally （i.p.） with 0.2 ml bacterial suspension at a density of 5.2 × 10^6 CFU/ml, while each one in control group injected i.p. with 0.2 ml sterile saline solution （0.85%, w/v）. Three bullfrogs in both groups were sampled at 0, 1, 3, 7, 11, 15 and 20 days post-injection （dpi） for the evaluation of non-specific immune parameters. It was observed that intraperitoneal injection of A. hydrophila significantly increased the number of leucocytes and that of NBT-positive cells in peripheral blood. Significant increases in serum bactericidal activity and serum acid phosphatase activity were also observed in the bacterium-injected frogs when compared with those in the control group. However, a significant reduction was detected in vitro in phagocytosis activity of peripheral blood phagocytes. No significant difference in changes in the number of peripheral erythrocytes, serum superoxide dismutase （SOD） activity, and lysozyme activity was detected between the two groups. It is suggested that bullfrogs may produce a series of non-specific immune reactions in response to the A. hydrophila infection.     

The Evaluation on Biological Properties of Carboxymethylchitosan and Carboxymethyl-chitin

Carboxymethyl-chitosan and carboxymethyl-chitin were prepared with the methods developed in our laboratory. The DS （degree of substitution） and DD （degree of deacetylation） of the carboxymethyl-chitosan were 103.14% and 97.18% respectively, while the DS of the carboxymethyl-chitin was 96.37%. Their effects on human fibroblasts, intradermal irritation test, in vitro and vivo degradability, and biocompatibility were evaluated. The results indicate that the polysaccharides at low concentrations can facilitate the growth of human fibroblasts and the carboxymethyl-chitosan at 100 μg mL^-1 is the most effective. The polysaccharides at higher concentrations, however, inhibit the growth of fibroblasts. The PII （Primary Irritation Index） values of CM-chitosan and CM-chitin are both 0.0, which shows that they have no irritation reaction. Both of the polysaccharides show good degradability and biocompatibility. Carboxymethyl-chitin degrades faster in vitro than carboxymethyl-chitosan. The latter, however, has no inflammatory reaction after being implanted in vivo for 7 d and shows better biocompatibility. This study may provide a scientific basis for the use of earboxymethyl-ehitosan and carboxymethyl-chitin as biomaterials.