A straightforward approach for using single time domain simulations to assess characteristic extreme responses

Short-term wave design approach of marine structures, using nonlinear time domain simulations, is a design procedure that is recognized by various modern standard codes. One of the most challenging points of this approach is the evaluation of the characteristic extreme values for response parameters used in the design check equations. The most straightforward and recommended way to evaluate a response characteristic value is by fitting an extreme value probability distribution to the N-sample of extreme values extracted from N independent time domain simulations with duration equal to the short-term period indicated by the code, which is usually taken as 3 h. However, this procedure would not be practical for some types of marine structures, such as risers and mooring lines, under numerous design load cases and demanding huge finite element models. A more feasible approach would be to assess the response extreme value distribution using only a single short-term time domain simulation with duration shorter than 3 h. But reduced time simulations always introduce some additional statistical uncertainty into the extreme values estimates. This paper discusses a workable way of properly taking into account the statistical uncertainty associated with the simulation length in the assessment of a characteristic short-term extreme response value based on a single time series.     

Comparisons between the influences of habitat, body size and season on the dietary composition of the sparid Acanthopagrus latus in a large marine embayment

Seasonal samples from Shark Bay on the west coast of Australia were used to determine (1) the habitats occupied by the juveniles and adults of Acanthopagrus latus in this large subtropical marine embayment and (2) the extent to which the dietary composition of this sparid is influenced by habitat type, body length and season. Sampling was undertaken in two habitat types in which A. latus was known to be abundant, namely mangrove (Avicennia marina) creeks and nearby rocky areas, the latter comprising sandstone boulders and/or limestone reefs. The mean total length ±95% CLs of A. latus was far lower in mangrove creeks, 126 ± 6.1 mm, than in rocky areas, 313 ± 4.7 mm. As A. latus attains maturity at ca. 245 mm, the juveniles of this species typically occupy mangrove areas and then, with increasing body size, move to nearshore rocky areas, where they become adults. The species composition of the food ingested by juvenile A. latus in mangrove creeks differed markedly from that of large juveniles and adults in rocky areas. Based on analyses of data for both habitat types combined, this difference was far greater than that between size classes and season, which was negligible. There were indications, however, that, overall within each habitat, the dietary composition did change seasonally, although not with body size. Acanthopagrus latus fed predominantly on mangrove material, sesarmid crabs and small gastropods in mangrove habitats, and mainly on Brachidontes ustulatus in rocky areas, where this mytilid bivalve is very abundant. The mangrove material, which contributed nearly 40% of its overall dietary volume in mangrove creeks, consisted mainly of lateral root primordia. This apparently unique food source for a teleost is presumably ingested through subsurface nipping, which would be facilitated by the mouth and dentitional characteristics of sparids. The almost total lack of correspondence in the dietary compositions of fish in the length class that was well represented in both mangrove and rocky areas illustrates the extent to which this sparid is capable of opportunistic feeding behaviour.     

Computational study of sail performance in upwind condition

Airflow around yacht sails with imposed final geometry is simulated using a CFD code, reproducing experimental tests carried in a wind tunnel. Two configurations are considered: one, mast–main sail and the other, mast–jib–main sail. Both configurations were studied in the same flow conditions of air velocity and incidence angle. The grid is structured-like next to the sails and unstructured in the rest of the domain. The turbulence model used is Shear Stress Transport. The results are compared against experimental and numerical results.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.     

Path following control system for a tanker ship model

A two-dimensional path following control system for autonomous marine surface vessels is presented. The guidance system is obtained through a way-point guidance scheme based on line-of-sight projection algorithm and the speed controller is achieved through state feedback linearization. A new approach concerning the calculation of a dynamic line-of-sight vector norm is presented which main idea is to improve the speed of the convergence of the vehicle to the desired path. The results obtained are compared with the traditional line-of-sight scheme. It is intended that the complete system will be tested and implemented in a model of the “Esso Osaka” tanker. The results of simulations are presented here showing the effectiveness of the system aiming in to be robust enough to perform tests either in tanks or lakes.     

Phytoplankton biomass and size fractions in surface waters of the Australian sector of the southern ocean

We collected surface water along the 142nd E meridian from Tasmania to Antarctica in December 1999. We measured temperature, salinity and total chlorophyll a; additionally, we collected suspended particle size fractions and used fluorometric analysis to determine the quantity of chlorophyll a in each of four cell size classes: picoplankton (<3 μm), two nanoplankton fractions (3–10 μm and 10–20 μm) and microplankton (> 20 μm). Changes in temperature and salinity show that we crossed 6 water masses separated by 5 fronts. We found low abundance (<0.2 mg m⁻³) of chlorophyll in all size classes, with the exception of higher values near the continent (0.2 to 0.4 mg m⁻³). Lowest chlorophyll values (<0.1 mg m⁻³) were found in the Polar Frontal Zone (51° to 54°S). Microplankton made up the largest portion of total chlorophyll throughout most of the region. We conclude that biomass of all phytoplankton fractions, especially pico-and nanoplankton, was constrained by limiting factors, most probably iron, throughout the region and that ecosystem dynamics within a zone are not circumpolar but are regionalized within sectors.     

On the relevance of iron adsorption to container materials in small-volume experiments on iron marine chemistry: Fe-aided assessment of capacity, affinity and kinetics

Iron chemistry in seawater has been extensively studied in the laboratory, mostly in small-volume sample bottles. However, little has been reported about iron wall sorption in these bottles. In this paper, radio-iron ⁵⁵Fe was used to assess iron wall adsorption, both in terms of capacity, affinity and kinetics. Various bottle materials were tested. Iron sorption increased from polyethylene/polycarbonate to polymethylmetacrylate (PMMA)/high-density polyethylene/polytetrafluoroethylene to glass/quartz, reaching equilibrium in a 25–70 h period. PMMA was studied in more detail: ferric iron (Fe(III)) adsorbed on the walls of the bottles, whereas ferrous iron (Fe(II)) did not. Considering that in seawater the inorganic iron pool mostly consists of ferric iron, the wall will be a factor that needs to be considered in bottle experiments.The present data indicate that for PMMA with specific surface (S)-to-volume (V) ratio S/V, both iron capacity (42 ± 16 × 10^− 9 mol/m² or 1.7 × 10^− 9 mol/L recalculated for the S/V-specific PMMA bottles used) and affinity (log K_Fe'W = 11.0 ± 0.3 m²/mol or 12.4 ± 0.3 L/mol, recalculated for the S/V-specific PMMA bottles used) are of similar magnitude as the iron capacity and -affinity of the natural ligands in the presently used seawater and thus cannot be ignored.Calculation of rate constants for association and dissociation of both Fe'L (iron bound to natural occurring organic ligands) and Fe'W (iron adsorbed on the wall of vessels) suggests that the two iron complexes are also of rather similar kinetics, with rate constants for dissociation in the order of 10 ⁻⁴–10^− 5 L/s and rate constants for association in the order of 10⁸ L/(mol s). This makes that iron wall sorption should be seriously considered in small-volume experiments, both in assessments of shorter-term dynamics and in end-point observations in equilibrium conditions. Therefore, the present data strongly advocate making use of iron mass balances throughout in experiments in smaller volume set-ups on marine iron (bio) chemistry.     

Algorithm for non-hydrostatic dynamics in the Regional Oceanic Modeling System

A non-hydrostatic algorithm for the Regional Oceanic Modeling System (ROMS) is proposed. It is based on a decomposition technique for hydrostatic and non-hydrostatic pressure. The algorithm has a pressure-correction scheme with split-explicit time-stepping for baroclinic and barotropic vertical modes with a free surface. The algorithm implementation requires solving a Poisson equation for a non-hydrostatic pressure that has a non-symmetric matrix in discrete form. The efficiency of a different class of solvers and preconditioners were tested. The algorithm is successfully implemented with several examples where non-hydrostatic effects are important. These include standing external gravity waves; strongly nonlinear internal wave generation and transformation; stratified shear instability and its associated mixing; and nonlinear internal tidal generation over a ridge. The corresponding changes in the pre-processing and post-processing infrastructure in the existing hydrostatic ROMS code were performed to implement parallel elliptic solvers and a new set of dynamical equations.     

Population dynamics of Callichirus major (Say, 1818) (Crustacea, Thalassinidea) on a beach in northeastern Brazil

We describe the structure, reproductive cycle, fecundity, growth, and mortality of a harvested population of the ghost shrimp Callichirus major. Samples were collected at monthly intervals from September 1999 to October 2000 on an urban sandy beach (08°11′S 34°55′W) in northeastern Brazil. During this period the sex ratio did not differ significantly from 1:1 (0.98 M: 1 F). Minimum and maximum sizes of the Dorsal Oval were 2.59 and 12.19 mm for males and 4.46 and 12.62 mm for females, respectively. Ovigerous females were found throughout the period, except between August and September 2000. Maximum lifespan was estimated as 3.3 and 3.4 years for females and males, respectively. This northeastern population differed from others previously studied in southern and southeastern Brazil, in regard to sex ratio, maximum attained size, maturation size, period and duration of the reproductive cycle, and fecundity. We interpret these regional differences as evidence for over-fishing at the study site, and suggest that large-scale management plans for callianassid populations should use regional population parameters.     

Spatial variation in river runoff into a coastal area — An ecological approach

Carbon and nitrogen stable isotopes were used to investigate spatial variation in terrestrial particulate organic matter (POM) input to a coastal area off the Tagus river estuary. Isotopic variation in higher trophic level organisms was also examined, along the coast. This study was carried out in late summer, after a period of 3 months of low river flow. The overall aim was to determine if under such conditions the coastal area is enriched by the river plume and, particularly, if lower secondary productivity should be expected in some areas. Spatial variation was detected as a gradient of decreasing terrestrial input with increasing distance from the river. It was concluded that terrestrial carbon input was also incorporated into higher trophic levels and that organisms with lower mobility are more sensitive to the gradient in terrestrial input. Even in low flow conditions the whole fishing area remained under the influence of the river plume, which still accounted for 24% of the total POM 30 km from the river mouth. Additionally, δ¹⁵N values indicated pollution input from the river Tagus.