Evidence for pervasive mud volcanism in Acidalia Planitia, Mars

We have mapped 18,000+ circular mounds in a portion of southern Acidalia Planitia using their sizes, shapes, and responses in Nighttime IR. We estimate that 40,000+ of these features could occur in the area, with a distribution generally corresponding to the southern half of the proposed Acidalia impact basin. The mounds have average diameters of about 1 km and relief up to 180 m and most overlie units mapped as Early Amazonian.High resolution images of mound surfaces show relatively smooth veneers, apron-like extensions onto the plains, moats, and concentric circular crestal structures. Some images show lobate and flow-like features associated with the mounds. Albedo of the mounds is generally higher than that of the surrounding plains. Visible and near-infrared spectra suggest that the mounds and plains have subtle mineralogical differences, with the mounds having enhanced coatings or possibly greater quantities of crystalline ferric oxides.Multiple analogs for these structures were assessed in light of new orbital data and regional mapping. Mud volcanism is the closest terrestrial analogy, though the process in Acidalia would have had distinctly martian attributes. This interpretation is supported by the geologic setting of the Acidalia which sits at the distal end of the Chryse-Acidalia embayment into which large quantities of sediments were deposited through the Hesperian outflow channels. In its distal position, Acidalia would have been a depocenter for accumulation of mud and fluids from outflow sedimentation.Thus, the profusion of mounds in Acidalia is likely to be a consequence of this basin’s unique geologic setting. Basinwide mud eruption may be attributable to overpressure (developed in response to rapid outflow deposition) perhaps aided by regional triggers for fluid expulsion related to events such as tectonic or hydrothermal pulses, destabilization of clathrates, or sublimation of a frozen body of water. Significant release of gas may have been involved, and the extensive mud volcanism could have created long-lived conduits for upwelling groundwaters, providing potential habitats for an in situ microbiota.Mud volcanism transports minimally-altered materials from depth to the surface, and mud volcanoes in Acidalia, therefore, could provide access to samples from deep zones that would otherwise be inaccessible. Since the distal setting of Acidalia also would favor concentration and preservation of potentially-present organic materials, samples brought to the surface by mud volcanism could include biosignatures of possible past or even present life. Accordingly, the mounds of Acidalia may offer a new class of exploration target.     

Adiabatic indices in a convecting anisotropic plasma

Adiabatic indices for a non-dissipative anisotropic convecting plasma are analyzed, and general expressions for the effective adiabatic index and the partial adiabatic indices parallel (γ_∥) and perpendicular (γ_⟂) to the magnetic field are obtained. It is shown that, in the general case, the value of the effective adiabatic index is not an universal constant and depends on the plasma temperature anisotropy and on the properties of the plasma motion. The values of γ_⟂ and γ_∥ are shown to be independent of the plasma parameters being completely determined by the characteristics of the plasma flow.     

Aspects of Three-Dimensional Magnetic Reconnection – (Invited Review)

In this review paper we discuss several aspects of magnetic reconnection theory, focusing on the field-line motions that are associated with reconnection. A new exact solution of the nonlinear MHD equations for reconnective annihilation is presented which represents a two-fold generalization of the previous solutions. Magnetic reconnection at null points by several mechanisms is summarized, including spine reconnection, fan reconnection and separator reconnection, where it is pointed out that two common features of separator reconnection are the rapid flipping of magnetic field lines and the collapse of the separator to a current sheet. In addition, a formula for the rate of reconnection between two flux tubes is derived. The magnetic field of the corona is highly complex, since the magnetic carpet consists of a multitude of sources in the photosphere. Progress in understanding this complexity may, however, be made by constructing the skeleton of the field and developing a theory for the local and global bifurcations between the different topologies. The eruption of flux from the Sun may even sometimes be due to a change of topology caused by emerging flux break-out. A CD-ROM attached to this paper presents the results of a toy model of vacuum reconnection, which suggests that rapid flipping of field lines in fan and separator reconnection is an essential ingredient also in real non-vacuum conditions. In addition, it gives an example of binary reconnection between a pair of unbalanced sources as they move around, which may contribute significantly to coronal heating. Finally, we present examples in TRACE movies of geometrical changes of the coronal magnetic field that are a likely result of large-scale magnetic reconnection. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1005248007615     

A simulation study of capillary transport,preferential retention and distribution of salts in historic sandstone buildings

Salt crystallisation is a major problem of deterioration in historic stone buildings, monuments and sculptures. The capillary rise of soil water is one of the primary sources of salts in stone structures, which evaporates leaving the salts behind. It has been noted that the spatial distribution profile of different species of salts crystallised in historic stone buildings is not homogeneous, i.e. different salts crystallise at different locations. The capillary transport and inhomogeneous spatial distribution of different salts in the porous building materials has been considered to be a result of solubility-dependent crystallisation; however, the factors responsible for this phenomenon are not clearly known. This paper aims to investigate the factors influencing the differential distribution of salts during capillary rise of soil water. In this study, the capillary transport of salts was simulated on two different sandstones—Locharbriggs, a Permo–Triassic, red sandstone and Stoke Hall, a Carboniferous, buff sandstone. The experiments were carried out under controlled environmental conditions to eliminate the possibility of evaporation-driven crystallisation of salts depending on their solubilities. The results indicate that fractionation or differential distribution of salts takes place even in the absence of evaporation and crystallisation. The sandstones exhibit properties like an ion exchange column, and ionic species present in the salt solution show differential distribution within the porous network of sandstone.     

Source depletion and extent of melting in the Tongan sub-arc mantle

The fluid immobile High Field Strength Elements (HFSE) Nb and Ta can be used to distinguish between the effects of variable extents of melting and prior source depletion of the Tongan sub-arc mantle. Melting of spinel lherzolite beneath the Lau Basin back-arc spreading centres has the ability to fractionate Nb from Ta due to the greater compatibility of the latter in clinopyroxene. The identified spatial variation in plate velocities and separation of melt extraction zones, combined with extremely depleted lavas make Tonga an ideal setting in which to test models for arc melt generation and the role of back-arc magmatism.We present new data acquired by laser ablation-ICPMS of fused sample glasses produced without the use of a melt fluxing agent. The results show an arc trend towards strongly sub-chondritic Nb/Ta (< 17) with values as low as 7.2. Melting models show that large degree melts of depleted MORB mantle fail to reproduce the observed Nb/Ta. Alternatively, incorporation of residual back-arc mantle that has undergone less than 1% melting into the sub-arc melting regime reproduces arc values. However, the extent of partial melting required to produce the composition of the Lau Basin back-arc basalts averages 7%. This apparent discrepancy can be explained if only the lowermost 4 km of the residua from the mantle melt column beneath the back-arc is added to the source of arc magmas. We have identified that the degree of arc/back-arc coupling displayed in the rock record provides an index of the depth of hydrous melting beneath the arc. In this case, this would imply a depth of ~ 75 km for generation of arc magmas, indicating that hydrous melting in the mantle wedge is triggered by the breakdown of hydrous phases in the subducting slab.     

COMPUTER MODELING OF VERTICAL SEISMIC PROFILING*

There are numerous modeling techniques commonly employed for the computer simulation of seismic wave propagation. The capabilities of these techniques vary according to the theoretical foundations and subsequent approximations upon which the algorithms are based. This paper constitutes a comparative review of seven modeling methods: geometric ray theory, asymptotic ray theory, generalized ray theory, Kirchhoff wave theory, Fourier synthesis, finite differences, and finite elements. These methods can be categorized as ray or wave, acoustic or elastic, and can be contrasted according to their relative abilities to simulate such behavior as wave interference effects, diffractions, and mode conversions. As is implied by their names, geometric ray theory and asymptotic ray theory are both ray methods. The other five methods provide wave theory simulations. Geometric ray theory and Kirchhoff wave theory are normally implemented in acoustic form, while the other methods are readily adapted for computing elastic theory solutions. Generalized ray theory and Fourier synthesis are more limited in the complexity of geological model they can accommodate than are the other techniques. The methods which typically demand the greatest computer resources are the finite-difference and the finite-element techniques. All methods can incorporate at least some multiple events. Diffractions, however, are only inherent in the solutions computed by Kirchhoff wave theory, finite differences and finite elements. Attenuation is readily incorporated in both the Fourier synthesis and the finite-element methods. As an example of the application of seismic modeling, a geological model representative of a typical petroleum exploration target is used to compare vertical seismic profiles calculated by different modeling methods.     

A statistical study of pressure changes in the troposphere and lower stratosphere after strong solar flares

Summary The average change in height of several constant pressure levels in the troposphere and lower stratosphere after a strong solar flare is described. The analysis covers the northern hemisphere north of 10°N and is based on a sample of 81 carefully selected flares from the period July 1957 through December 1959.The statistical significance of the results is tested by drawing a comparison with the results obtained when one applies exactly the same analysis to three samples of 81 random key-dates selected from the same period.Properties of the reaction pattern are (1) it is pronounced at high as well as low latitudes, (2) it consists of alternating cells of positive and negative height change, (3) it is established within six hours after the flare, and (4) the maximum response occurs near the tropopause.It appears more likely that the atmospheric reaction pattern can be attributed to very energetic solar particles rather than to enhanced ultraviolet radiation.     

Statistical assessment of seismicity patterns in Italy: Are they precursors of subsequent events?

The variations of seismicity rate in Central Apenninesprior to the sequence started in September, 1997 (at00:33 UTC, M _L5.6) has been analysedby statistical methods, with the purpose of pointingup eventual periods of quiescence. The analysis wascarried out on the instrumental catalogue of theIstituto Nazionale di Geofisica (ING), covering theperiod from January 1975 to March 1998. In apreliminary phase, the catalogue was declustered usingthe Reasenberg algorithm. After that, eventualmagnitude shifts due to variations in the modalitiesof observation have been individuated and corrected.The subsequent analysis, carried out making use of theZmap software package, has put in evidence thatthe sequence of September 1997 was preceded bya 2.5 year period characterised by absence of eventsof magnitude larger than 3.2, in an area approximately20 × 40 km wide, including the epicentre of themain shock. The statistical methodology shows thatonly 1/10³ of the space-time volumes analysed inthis study, exhibited quiescence of the same level.The study of seismicity rate change correlated toprevious main shocks in a larger area of CentralApennines shows that none of them were preceded by aseismic quiescence, specially close to the epicentreof the main shock, and lasting until the time ofoccurrence of the main shock as in the 1997 case.Actually, we found other patterns of precursoryquiescence with different time or space distribution.We conclude that precursory quiescence is a realfeature of Central Apennines seismicity, but it isdifficult to define a simple hypothesis, which appliesto the generality of cases and can be tested beforeimplementation in a system of earthquake riskmitigation.     

Observations of vertical ground accelerations exceeding gravity during the 1997 Umbria-Marche (central Italy) earthquakes

We found extensive evidence that the vertical ground accelerations produced during the largest shock (M = 6.0) of the 1997 Umbria-Marche earthquake sequence exceeded 1g in two areas close to the heavily-damaged villages of Annifo and Colle Croce. This evidence comes from the striking observation of thousands of freshly fractured and broken rocks and stones in these areas. Some of the broken stones lie isolated on soft detritic soil while others had been previously piled up, probably a long time agoto clear the fields for farming. The freshness of the cuts and fractures and the consistency of the observations for thousands of rocks and stones in these areas indicate that these rocks were thrown upwards during the earthquake, with breakage occurring at the time of impact. Ground motion calculations consistent with the static deformation inferred from GPS and interferometry data, show that the broken stones and rocks are found in the zone where the strongest shaking took place during the earthquake and that most of the shaking there was vertical.