Tidal boundary conditions in SEAWAT

SEAWAT, a U.S. Geological Survey groundwater flow and transport code, is increasingly used to model the effects of tidal motion on coastal aquifers. Different options are available to simulate tidal boundaries but no guidelines exist nor have comparisons been made to identify the most effective approach. We test seven methods to simulate a sloping beach and a tidal flat. The ocean is represented in one of the three ways: directly using a high hydraulic conductivity (high-K) zone and indirect simulation via specified head boundaries using either the General Head Boundary (GHB) or the new Periodic Boundary Condition (PBC) package. All beach models simulate similar water fluxes across the upland boundary and across the sediment-water interface although the ratio of intertidal to subtidal flow is different at low tide. Simulating a seepage face results in larger intertidal fluxes and influences near-shore heads and salinity. Major differences in flow occur in the tidal flat simulations. Because SEAWAT does not simulate unsaturated flow the water table only rises via flow through the saturated zone. This results in delayed propagation of the rising tidal signal inland. Inundation of the tidal flat is delayed as is flow into the aquifer across the flat. This is severe in the high-K and PBC models but mild in the GHB models. Results indicate that any of the tidal boundary options are fine if the ocean-aquifer interface is steep. However, as the slope of that interface decreases, the high-K and PBC approaches perform poorly and the GHB boundary is preferable.     

Integrated biomarker assessment of the effects exerted by treated produced water from an onshore natural gas processing plant in the North Sea on the mussel Mytilus edulis

The biological impact of a treated produced water (PW) was investigated under controlled laboratory conditions in the blue mussel, Mytilus edulis. Mussel health status was assessed using an integrated biomarker approach in combination with chemical analysis of both water (with SPMDs), and mussel tissues. Acyl-CoA oxidase activity, neutral lipid accumulation, catalase activity, micronuclei formation, lysosomal membrane stability in digestive cells and haemocytes, cell-type composition in digestive gland epithelium, and the integrity of the digestive gland tissue were measured after 5 week exposure to 0%, 0.01%, 0.1%, 0.5% and 1% PW. The suite of biomarkers employed were sensitive to treated PW exposure with significant sublethal responses found at 0.01-0.5% PW, even though individual chemical compounds of PW were at extremely low concentrations in both water and mussel tissues. The study highlights the benefits of an integrated biomarker approach for determining the potential effects of exposure to complex mixtures at low concentrations. Biomarkers were integrated in the Integrative Biological Response (IBR/n) index.     

Identification of genes expressed in juvenile Haliotis rufescens in response to different copper concentrations in the north of Chile under controlled conditions

This study reports molecular markers potentially associated with resistance or sensitivity to the impact of copper in juvenile red abalone, Haliotis rufescens, in the north of Chile under experimental conditions. Genomic analysis was made applying subtractive hybridization libraries (SSH) to identify genes up-and down regulated during cooper exposure in abalone over periods of 12 and 168 h exposed to 2.5 and 10 μg/L of Cu⁺². Results obtained from the SSH library revealed 368 different sequences regulated by copper, that correspond to eight major physiological functions. The validation of these sequences obtained by SSH as well as their expression kinetics were made by PCR in real time on 14 potential genes regulated by metal stress. This study provides information for the characterization of potential genomic markers that may be used in future environmental monitoring and to investigate new mechanisms of stress to copper in this commercially important marine species.     

Assessment of sacrificial anode impact by aluminum accumulation in mussel Mytilus edulis: a large-scale laboratory test

Since the early 1960s, the application of aluminum alloy sacrificial anodes to mitigate marine corrosion has been well known. The aim of this work was to study aluminum bioconcentration in Mytilus edulis by an in vitro test performed in two tanks: the first containing non-contaminated water (NCW) and the second containing aluminum-contaminated water (CW) (530 μg L⁻¹) released by sacrificial anode. The mussels were collected and examined over a period of 8 weeks. A comparison between the aluminum concentrations in the digestive glands of mussels from the CW and NCW tanks shows that the highest value (1700 mg/kg d.w.) was found in the CW mussels collected after 13 days. In NCW, the mean aluminum concentration in digestive glands during the test was 281 mg/kg d.w. The rapid concentration decrease in digestive glands is probably due to the inhibition of filtering activity due to valve closure at the high concentration as well as the induction of the detoxification response.     

Validation of Arenicola marina in field toxicity bioassays using benthic cages: biomarkers as tools for assessing sediment quality

Sediment toxicity assessments using caged organisms present advantages over using laboratory and native community studies. The use of caged Arenicola marina in sediment toxicity assessments was evaluated. Lugworms were exposed in situ to sediments from coastal and port areas in Spain for seven days, and the activities of the biotransformation enzymes ethoxyresorufin O-deethylase, dibenzylfluorescein dealkylase and glutathione S-transferase, the activities of the antioxidant enzymes glutathione reductase and glutathione peroxidase and lipid peroxidation were then analyzed as biomarkers. Biomarker results and sediment physicochemical data were integrated. Cádiz Bay (SW Spain) sediments presented metal contamination that was not linked to a biochemical response. In LPGC Port (SW Spain), Pb contamination exhibited a moderate toxic potential, while PAHs, and presumably pharmaceuticals, provoked biochemical responses that efficiently prevented lipid peroxidation. In Santander Bay (N Spain), exposure to PAHs and, presumably, pharmaceuticals induced biomarker responses, but lipid peroxidation occurred nevertheless. These results indicated that caged A. marina were effective for the assessment of sediment quality and that the selected biomarkers were sufficiently sensitive to identify chemical exposure and toxicity.     

Temporal and life history related trends of perfluorochemicals in harbor porpoises from the Danish North Sea

Eighty-five stranded or bycaught harbor porpoises collected from the Danish North Sea between 1980 and 2005 were analyzed for perfluorochemicals in the liver. PFOS was the predominant compound, making up on average 88.9% of the ∑PFC, followed by PFOSA (7.8%). PFUnA (1.9%) and PFDA (1.2%) were detected in most samples. PFHxS, PFNA and PFOA were only found in a minority of the samples. We found substantial differences in PFC concentrations among life history stages, the highest concentrations were found in neonates, suckling juveniles and lactating females. Such differences should be considered when PFC levels in wildlife are evaluated. The high concentrations found in young porpoises are of concern as PFCs have known toxic effects on the development of the central nervous system and reproductive organs. Despite efforts to reduce PFC emissions, a decreasing temporal trend of concentrations was not detected for any compound. PFCA concentrations were found to be increasing.     

基于Ferry Borges理论的地震与重卡车作用下桥梁内力的组合问题

目前的AASHTO LRFD桥梁规范主要考虑重力荷载和卡车等活荷载的组合情况,而没有在概率基础上考虑地震等极端荷载的组合问题.包括LRFD在内的很多桥梁抗震规范都是主要考虑地震的作用,甚至设计时不考虑其他荷载的作用,LRFD设计指导手册中在考虑地震等极端荷载时,也只是提到在特殊情况和桥梁比较长的情况下再考虑卡车的作用,...     

Braiding process and bank erosion in the Brahmaputra River

The present work explores relations between stream power,braiding intensities and bank erosion in certain stretches of the Brahmaputra River.In this paper,an objective approach is presented to enable quantitative assessment of spatio-temporal behaviour of channel braiding process of the Brahmaputra River by using the Plan Form Index and corresponding estimation of stream power to establish a behavioural pattern of variability of potential energy expenditure.The braiding index is compared for discrete years to understand the morphological behaviour.Subsequently,a real time estimation of stream power for certain stretches of Brahmaputra River is done in order to analyse its variability in braiding intensity and bank erosion.The paper presents the dynamic behaviour of the channel pattern of the Brahmaputra River System in Assam valley of India over a time span of 18 years.The procedure addresses the selection of input parameters from digital satellite images,comprising scenes for the years 1990,1997 and 2007 with specific dates,from Dhubri near Indo-Bangladesh Border to Upper Assam.Deployment of GIS technique has been made to extract the required parameters to derive Plan Form Indices for the entire study reach.Stream power estimation is done for corresponding latest floods and for corresponding dates of image scenes.The study indicated that due to consistent aggradation of riverbed inducing temporal declination of stream power,there is an occurrence of wide spread braiding.This in turn incurs substantial yearly land loss due to bank erosion,caused by flow concentrations due to temporal evolution of multiple channels in the Brahmaputra River.     

Experimental study of friction dissipators for seismic protection of building structures

This paper presents the results from unidirectional shaking table tests of two reduced scale steel models of a building frame, with one and two floors, respectively. These frames incorporate friction dissipators at every floor. The inputs are sine-dwells and artificial and registered earthquakes. This study is part of a larger research project aiming to assess the seismic efficiency of friction dissipators by means of an integrated numerical and experimental approach. Inside this framework, the main objectives of these experiments are to: (i) collect a wide range of results to calibrate a numerical model derived within the project, (ii) clarify some of the most controversial issues about friction dissipators (including behavior for inputs containing pulses, capacity to reduce resonance peaks, introduction of high frequencies in the response, and self-generated eccentricities), (iii) better understand their dynamic behavior, (iv) provide insight on the feasibility and reliability of using simple friction dissipators for seismic protection of building structures and (v) characterize the hysteretic behavior of these devices. Most of these objectives are satisfactorily reached and relevant conclusions are stated.