Incorporation,distribution and fate of saturated petroleum hydrocarbons in sediments from a controlled marine ecosystem

A simulation of a chronic input of petroleum into an estuarine environment was investigated using the facilities at the Marine Ecosystems Research Laboratory at the University of Rhode Island. An oil-water dispersion of No. 2 fuel oil was added to the system (twice weekly for 24 weeks) and the saturated hydrocarbons from this oil were measured in suspended material and sediments. After the initial chronic oil addition, trace amounts of hydrocarbons were detected in the sediments within two weeks, but substantial accumulation was not detected for approximately 135 days. The oil appeared to enter the sediment via the suspended material, with most of the saturated hydrocarbons associated with smaller size sediment particles (< 45 μm to > 0·3 μm). With time, the fuel oil saturated hydrocarbons in the sediments were mixed to a depth of 3 to 4 cm. Although only 12% of the total saturated hydrocarbons added to the system were found in the sediments, these hydrocarbons appear to be relatively stable and were still detectable in these sediments for at least six months after the last oil addition.     

Estrogenic responses of larval sunshine bass (Morone saxatilis x M. Chrysops) exposed to New York City sewage effluent

To determine the estrogenicity of effluents from sewage treatment plants (STPs) to larval fish, 2-day-old sunshine bass were exposed to effluents from three STPs serving New York City (NYC), varying in size and treatment level. Estrogenic response was evaluated by measuring vitellogenin (VTG) and estrogen receptor (ER) expression in cytosolic fractions of whole body homogenates. Concentrations of the presumptive endocrine disruptors in the effluents were also measured. VTG and ER levels in sewage-exposed fish were 3-5 times that observed in controls. Combined concentrations of estradiol and estrone ranged from 5 to 13 ng/l and nonylphenol-ethoxylate metabolites (NPEOs: 4-nonylphenol, and 1-, 2-, and 3-nonylphenol-ethoxylates) ranged from 180 to 470 microg/l in chlorinated effluent. Results indicate that both ER and VTG can be used as biomarkers for endocrine disruption in larval fish, and that 4-day exposure to sewage effluent is sufficient to elicit significant expression of these markers in sunshine bass larvae. The extremely higher concentrations of NPEOs found in effluent relative to hormones (approximately 40,000-fold) indicates that surfactant metabolites may be contributing significantly to the estrogenic effects observed.     

Accelerated relative sea-level rise and rapid coastal erosion:: testing a causal relationship for the Louisiana barrier islands

The role of relative sea-level rise as a cause for the rapid erosion of Louisiana's barrier island coast is investigated through a numerical implementation of a modified Bruun rule that accounts for the low percentage of sand-sized sediment in the eroding Louisiana shoreface. Shore-normal profiles from 150 km of coastline west of the Mississippi delta are derived from bathymetric surveys conducted during the 1880s, 1930s and 1980s. An RMS difference criterion is employed to test whether an equilibrium profile form is maintained between survey years. Only about half the studied profiles meet the equilibrium criterion; this represents a significant limitation on the potential applicability of the Bruun rule. The profiles meeting the equilibrium criterion, along with measured rates of relative sea-level rise, are used to hindcast shoreline retreat rates at 37 locations within the study area. Modeled and observed shoreline retreat rates show no significant correlation. Thus, in terms of the Bruun approach, relative sea-level rise has no power for hindcasting (and presumably forecasting) rates of coastal erosion for the Louisiana barrier islands.     

The role of granites in volcanic-hosted massive sulphide ore-forming systems: an assessment of magmatic�Chydrothermal contributions

Assessment of geological, geochemical and isotopic data indicates that a significant subgroup of volcanic-hosted massive sulphide (VHMS) deposits has a major or dominant magmatic?Chydrothermal source of ore fluids and metals. This group, which is typically characterised by high Cu and Au grades, includes deposits such as those in the Neoarchean Doyon-Bousquet-LaRonde and Cambrian Mount Lyell districts. These deposits are distinguished by aluminous advanced argillic alteration assemblages or metamorphosed equivalents intimately associated with ore zones. In many of these deposits, ??³⁴S_sulphide is low, with a major population below ?3??; ??³⁴S_sulphate differs from coexisting seawater and ??³⁴S_{sulphate?Csulphide}????20?C30??. These characteristics are interpreted as the consequence of disproportionation of magmatic SO₂ as magmatic?Chydrothermal fluids ascended and cooled and as a definitive evidence for a significant magmatic?Chydrothermal contribution. Other characteristics that we consider diagnostic of significant magmatic?Chydrothermal input into VHMS ore fluids include uniformly high (>3 times modern seawater values) salinities or very ¹⁸O-enriched (??¹⁸O?>?5??) ore fluids. We do not consider other criteria [e.g. variable salinity, moderately high ??¹⁸O_fluid (2?C5??), ??³⁴S_sulphide near 0??, metal assemblages or a spatial association with porphyry Cu or other clearly magmatic-hydrothermal deposits] that have been used previously to advocate significant magmatic?Chydrothermal contributions to be diagnostic as they can be produced by non-magmatic processes known to occur in VHMS mineral systems. However, in general, a small magmatic?Chydrothermal contribution cannot be excluded in most VHMS systems considered. Conclusive data that imply minimal magmatic?Chydrothermal contributions are only available in the Paleoarchean Panorama district where coeval seawater-dominated and magmatic?Chydrothermal systems appear to have been physically separated. This district, which is characterised by chloritic and sericitic alteration assemblages and lacks aluminous advanced argillic alteration assemblages, is typical of many VHMS deposits around the world, suggesting that for ??garden variety?? VHMS deposits, a significant magmatic?Chydrothermal contribution is not required. Other than deposits associated with advanced argillic alteration assemblages, the only deposit for which we ascribe a major magmatic?Chydrothermal contribution is the Devonian Neves Corvo deposit. This deposit differs from other deposits in the Iberian Pyrite Belt and around the world in being extremely Sn-rich, with the Sn closely associated with Cu and in having formed from high ¹⁸O-rich fluids (??¹⁸O_fluid ??8.5??). We consider these characteristics, particularly the last, as diagnostic of a significant magmatic hydrothermal contribution. Our analysis indicates that two subgroups of VHMS deposits have a major magmatic?Chydrothermal contribution: Cu/Au-rich deposits with aluminous alteration assemblages and reduced, very Sn-rich deposits in which Sn was introduced in a high-temperature ore assemblage. Comparison with ??normal?? VHMS deposits suggests that these subgroups of VHMS deposits may form in specialised tectonic environments. The Cu/Au-rich deposits appear to form adjacent to magmatic arcs, an environment conducive to the generation of hydrous, oxidised melts by melting metasomatised mantle in the wedge above the subducting slab. This contrasts with the back-arc setting of ??normal?? VHMS deposits in which relatively dry granites (In this contribution, we use the term granite sensu latto) formed by decompression melting drive seawater-dominated hydrothermal circulation. The tectonic setting of highly Sn-rich VHMS deposits such as Neves Corvo is less clear; however, thick continental crust below the ore-hosting basin may be critical, as it is in other Sn deposits.     

In situ tensile fracture toughness of surficial cohesive marine sediments

This study reports the first in situ measurements of tensile fracture toughness, K _IC, of soft, surficial, cohesive marine sediments. A newly developed probe continuously measures the stress required to cause tensile failure in sediments to depths of up to 1 m. Probe measurements are in agreement with standard laboratory methods of K _IC measurements in both potter’s clay and natural sediments. The data comprise in situ depth profiles from three field sites in Nova Scotia, Canada. Measured K _IC at two muddy sites (median grain size of 23–50 μm) range from near zero at the sediment surface to >1,800 Pa m^1/2 at 0.2 m depth. These profiles also appear to identify the bioturbated/mixed depth. K _IC for a sandy site (>90% sand) is an order of magnitude lower than for the muddy sediments, and reflects the lack of cohesion/adhesion. A comparison of K _IC, median grain size, and porosity in muddy sediments indicates that consolidation increases fracture strength, whereas inclusion of sand causes weakening; thus, sand-bearing layers can be easily identified in K _IC profiles. K _IC and vane-measured shear strength correlate strongly, which suggests that the vane measurements should perhaps be interpreted as shear fracture toughness, rather than shear strength. Comparison of in situ probe-measured values with K _IC of soils and gelatin shows that sediments have a K _IC range intermediate between denser compacted soils and softer, elastic gelatin.     

The peterson limestone — early cretaceous lacustrine carbonate deposition in western wyoming and southeastern idaho

The lacustrine Peterson Limestone of western Wyoming and southeastern Idaho comprises six lithofacies throughout its 20,000 km² aerial extent. These are: (1) calcareous sandstone and shale, (2) red nodular limestone, (3) pink sandy micrite, (4) biomicrite, (5) graded silty micrite, and (6) limestone conglomerate. The first two represent floodplain deposition and paleosols, whereas the remaining are shallow nearshore and deeper lacustrine sediments.This sequence was developed in a large fresh, hardwater lake surrounded by fluvial systems and associated flood plains in a warm temperate climate. Well-oxidized sandy terrigenous rocks, together with calcareous paleosol nodules, indicate that flood-plain deposition both preceded and was concurrent with lacustrine carbonate deposition. Micrite and biomicrite formed in deeper parts of the basin while sandy and silty carbonate accumulated in shallower lake-margin areas. Less-calcareous shale units which are interbedded with deeper-water carbonate were deposited either during rapid basin subsidence and deepening of the lake center or during periods of slower carbonate precipitation. Turbidity currents and subaqueous debris flows generated along steeper lake margins, resulted in the deposition of rhythmic layers of graded silty micrite and diamictic limestone conglomerate in the deepest part of the basin. The carbonate-rich sediments comprising these two lithofacies were originally deposited on shallow lake-margin benches and subsequently were transported downslope toward the lake center.Comparison with other carbonate-precipitating lacustrine systems indicates that this lake was not like modern playas. Although no known modern lacustrine system is precisely like Lake Peterson, the flora, fauna, composition, and distribution of facies within modern temperate-region lakes most closely resemble those of the Peterson Limestone.     

Controls on Fe reduction and mineral formation by a subsurface bacterium

The reductive dissolution of FeIII (hydr)oxides by dissimilatory iron-reducing bacteria (DIRB) could have a large impact on sediment genesis and Fe transport. If DIRB are able to reduce FeIII in minerals of high structural order to carry out anaerobic respiration, their range could encompass virtually every O₂-free environment containing FeIII and adequate conditions for cell growth. Previous studies have established that Shewanella putrefaciens CN32, a known DIRB, will reduce crystalline Fe oxides when initially grown at high densities in a nutrient-rich broth, conditions that poorly model the environments where CN32 is found. By contrast, we grew CN32 by batch culture solely in a minimal growth medium. The stringent conditions imposed by the growth method better represent the conditions that cells are likely to encounter in their natural habitat. Furthermore, the expression of reductases necessary to carry out dissimilatory Fe reduction depends on the method of growth. It was found that under anaerobic conditions CN32 reduced hydrous ferric oxide (HFO), a poorly crystalline FeIII mineral, and did not reduce suspensions containing 4 mM FeIII in the form of poorly ordered nanometer-sized goethite (α-FeOOH), well-ordered micron-sized goethite, or nanometer-sized hematite (α-Fe₂O₃) crystallites. Transmission electron microscopy (TEM) showed that all minerals but the micron-sized goethite attached extensively to the bacteria and appeared to penetrate the outer cellular membrane. In the treatment with HFO, new FeII and FeIII minerals formed during reduction of HFO-Fe in culture medium containing 4.0 mmol/L P_i (soluble inorganic P), as observed by TEM with energy-dispersive X-ray spectroscopy, selected area electron diffraction, and X-ray diffraction. The minerals included magnetite (Fe₃O₄), goethite, green rust, and vivianite [Fe₃(PO₄)₂ · 8H₂O]. Vivianite appeared to be the stable end product and the mean coherence length was influenced by the rate of FeIII reduction. When P_i was 0.4 mol/L under otherwise identical conditions, goethite was the only mineral observed to form, and less Fe²⁺ was produced overall. Hence, the ability of DIRB to reduce Fe (hydr)oxides may be limited when the bacteria are grown under nutrient-limited conditions, and the minerals that result depend on the vigor of FeIII reduction.     

Graded-Density Reservoirs for Accessing High Stress Low Temperature Material States

In recently developed laser-driven shockless compression experiments an ablatively driven shock in a primary target is transformed into a ramp compression wave in a secondary target via unloading followed by stagnation across an intermediate vacuum gap. Current limitations on the achievable peak longitudinal stresses are limited by the ability of shaping the temporal profile of the ramp compression pulse. We report on new techniques using graded density reservoirs for shaping the loading profile and extending these techniques to high peak pressures.