DO CENTRAL CITIES AND SUBURBS HAVE SIMILAR DIMENSIONS OF NEED?

This paper examines the proposition that United States suburbs are gradually acquiring many of the traits and problems traditionally associated with inner cities. An analysis of direct and surrogate measures of community development need indicates that in 1970 the average central city had a greater percapita need than the average Chicago suburb. However, the dimensions of need of central cities and suburbs are quite similar. Close associations between minority race, poverty, and female-headed families exist in both central cities and suburbs, as do high residual correlations between population decline, elderly populations, and low levels of crowding.     

Development of airborne oil thickness measurements

A laboratory sensor has now been developed to measure the absolute thickness of oil on water slicks. This prototype oil slick thickness measurement system is known as the laser-ultrasonic remote sensing of oil thickness (LURSOT) sensor. This laser opto-acoustic sensor is the initial step in the ultimate goal of providing an airborne sensor with the ability to remotely measure oil-on-water slick thickness. The LURSOT sensor employs three lasers to produce and measure the time-of-flight of ultrasonic waves in oil and hence provide a direct measurement of oil slick thickness. The successful application of this technology to the measurement of oil slick thickness will benefit the scientific community as a whole by providing information about the dynamics of oil slick spreading and the spill responder by providing a measurement of the effectiveness of spill countermeasures such as dispersant application and in situ burning.

This paper will provide a review of early developments and discuss the current state-of-the-art in the field of oil slick thickness measurement.     

Tar ball frequency data and analytical results from a long-term beach monitoring program

Following the spill of fuel oils from the New Carissa in February 1999, approximately 300 km of beaches on the Pacific coast of North America were surveyed. A long-term observation program focused on the documentation of stranded tar balls in the vicinity of the spill site. Systematic beach surveys which were conducted over the period March 1999 to April 2001 and semi-logarithmic scale, time-series plots proved the most useful format for identifying trends. Beach monitoring continued through to August 2001. by which time 212 tar balls had been analyzed by GC/MS for their chemical characteristics. The samples of tar balls collected between February 1999 and August 2001 were qualitatively compared with New Carissa source oils (NCSO) and 101 (48%) were not consistent with NSCO. The presence of tar balls that are not related to an incident can confound attempts to define cleanup or endpoint criteria and to assess possible injury to natural resources.     

A High-Eccentricity Low-Mass Companion to HD 89744

We present deep Hubble Space Telescope (HST) imaging, as well as ground-based imaging and spectroscopy, of the optical afterglow associated with the long-duration gamma-ray burst GRB 990712 and its host galaxy. The data were obtained 48-123 days after the burst occurred. The magnitudes of the host (R=21.9, V=22.5) and optical afterglow (R=25.4, V=25.8, 47.7 days after the burst) favor a scenario in which the optical light follows a pure power-law decay with an index of alpha approximately -1.0. We find no evidence for a contribution from a supernova like SN 1998bw. This suggests that either there are multiple classes of long-duration gamma-ray bursts or that the peak luminosity of the supernova was more than 1.5 mag fainter than SN 1998bw. The HST images and EFOSC2 spectra indicate that the gamma-ray burst was located in a bright, extended feature (possibly a star-forming region) 1.4 kpc from the nucleus of a 0.2L*B galaxy at z=0.434, possibly a Seyfert 2 galaxy. The late-time afterglow and host galaxy of GRB 990712 bear some resemblance to those of GRB 970508.     

The Effect of Vegetation Productivity on Millet Prices in the Informal Markets of Mali, Burkina Faso and Niger

Systematic evaluation of food security throughout the Sahel has been attempted for nearly two decades. Food security analyses have used both food prices to determine the ability of the population to access food, and satellite-derived vegetation indices that measure vegetation production to establish how much food is available each year. The relationship between these two food security indicators is explored here using correspondence analysis and through the use of Markov chain models. Two sources of quantitative data were used: 8 km normalized difference vegetation index (NDVI) data from the Advanced Very High Resolution Radiometers (AVHRR) carried on the NOAA series of satellites, and monthly millet prices from 445 markets in Mali, Niger and Burkina Faso. The results show that the growing season vegetation production is related to the price of millet at the annual and the seasonal time scales. If the growing season was characterized by erratic, sparse rainfall, it resulted in higher prices, and well-distributed, abundant rainfall resulted in lower prices. The correspondence between vegetation production and millet prices is used to produce maps of millet prices for West Africa.     

The role of surface heterogeneity in modelling the stable boundary layer

High-resolution numerical simulations are performed for three nights for each of two areas of the United Kingdom. Area-averaging techniques are then used to calculate effective stability functions for turbulence parametrizations in models using typical mesoscale and global spatial resolutions. Comparisons are made with parametrizations commonly used in numerical weather prediction models. The present results do not suggest that significant enhancement of the stability functions above 50 m is justified. Closer to the surface, more significant enhancement is observed in some regions. It is shown that the amount of enhancement is related to the variability of the orography.     

Transformations of mercury, iron, and sulfur during the reductive dissolution of iron oxyhydroxide by sulfide

Methylmercury can accumulate in fish to concentrations unhealthy for humans and other predatory mammals. Most sources of mercury (Hg) emit inorganic species to the environment. Therefore, ecological harm occurs when inorganic Hg is converted to methylmercury. Sulfate- and iron-reducing bacteria (SRB and FeRB) methylate Hg, but the effects of processes involving oxidized and reduced forms of sulfur and iron on the reactivity of Hg, including the propensity of inorganic Hg to be methylated, are poorly understood. Under abiotic conditions, using a laboratory flow reactor, bisulfide (HS⁻) was added at 40 to 250 μM h⁻¹ to 5 g L⁻¹ goethite (α-FeOOH) suspensions to which Hg(II) was adsorbed (30-100 nmol m⁻²) at pH 7.5. Dissolved Hg initially decreased from 10³ or 10⁴ nM (depending on initial conditions) to 10⁻¹ nM, during which the concentration of Hg(II) adsorbed to goethite decreased by 80% and metacinnabar (β-HgS_(s)) formed, based on identification using Hg L_III-edge extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. The apparent coordination of oxygens surrounding Hg(II), measured with EXAFS spectroscopy, increased during one flow experiment, suggesting desorption of monodentate-bound Hg(II) while bidentate-bound Hg(II) persisted on the goethite surface. Further sulfidation increased dissolved Hg concentrations by one to two orders of magnitude (0.5 to 10 nM or 30 nM), suggesting that byproducts of bisulfide oxidation and Fe(III) reduction, primarily polysulfide and potentially Fe(II), enhanced the dissolution of β-HgS_(s) and/or desorption of Hg(II). Rapid accumulation of Fe(II) in the solid phase (up to 40 μmol g⁻¹) coincided with faster elevation of dissolved Hg concentrations. Fe(II) served as a proxy for elemental sulfur [S(0)], as S(0) was the dominant bisulfide oxidation product coupled to Fe(III) reduction, based on sulfur K-edge X-ray absorption near edge structure (XANES) spectroscopy. In one experiment, dissolved Hg concentrations tracked those of all sulfide species [S(-II)]. These results suggest that S(-II) reacted with S(0) to form polysulfide, which then caused the dissolution of β-HgS_(s). A secondary Fe-bearing phase resembling poorly formed green rust was observed in sulfidized solids with scanning electron microscopy, although there was no clear evidence that either surface-bound or mineralized Fe(II) strongly affected Hg speciation. Examination of interrelated processes involving S(-II) and Fe(III) revealed new modes of Hg solubilization previously not considered in Hg reactivity models.     

Analysis of I in groundwater samples: Direct and quantitative results below the drinking water standard

This paper highlights an analytical method based on mass measurement that can be used to directly quantify ¹²⁹I in groundwater samples at concentrations below the maximum contaminant level (MCL) without the need for sample pre-concentration or extraction. Samples were analyzed on a Perkin Elmer ELAN DRC II ICP-MS after minimal dilution using O₂ as the reaction gas. Analysis of continuing calibration verification standards indicated that the dynamic reaction cell (DRC) mode could be used for quantitative analysis of ¹²⁹I in samples below the MCL (0.0057 ng/mL or 1 pCi/L). The low analytical detection limit of ¹²⁹I analysis in the DRC mode coupled with minimal sample dilution (1.02x) resulted in a final estimated quantification limit of 0.0051 ng/mL. Subsequent analysis of three groundwater samples containing ¹²⁹I resulted in fully quantitative results in the DRC mode, and spike recovery analyses performed on all three samples confirmed that the groundwater matrix did not adversely impact the analysis of ¹²⁹I in the DRC mode. This analytical approach has been proven to be a cost-effective, high-throughput technique for the direct, quantitative analysis of ¹²⁹I in groundwater samples at environmentally relevant concentrations that reach below the current MCL.