The role of hydrothermal fluids in sedimentation in saline alkaline lakes: Evidence from Nasikie Engida,Kenya Rift Valley

Saline alkaline lakes that precipitate sodium carbonate evaporites are most common in volcanic terrains in semi‐arid environments. Processes that lead to trona precipitation are poorly understood compared to those in sulphate‐dominated and chloride‐dominated lake brines. Nasikie Engida (Little Magadi) in the southern Kenya Rift shows the initial stages of soda evaporite formation. This small shallow (<2 m deep; 7 km long) lake is recharged by alkaline hot springs and seasonal runoff but unlike neighbouring Lake Magadi is perennial. This study aims to understand modern sedimentary and geochemical processes in Nasikie Engida and to assess the importance of geothermal fluids in evaporite formation. Perennial hot‐spring inflow waters along the northern shoreline evaporate and become saturated with respect to nahcolite and trona, which precipitate in the southern part of the lake, up to 6 km from the hot springs. Nahcolite (NaHCO₃) forms bladed crystals that nucleate on the lake floor. Trona (Na₂CO₃·NaHCO₃·2H₂O) precipitates from more concentrated brines as rafts and as bottom‐nucleated shrubs of acicular crystals that coalesce laterally to form bedded trona. Many processes modify the fluid composition as it evolves. Silica is removed as gels and by early diagenetic reactions and diatoms. Sulphate is depleted by bacterial reduction. Potassium and chloride, of moderate concentration, remain conservative in the brine. Clastic sedimentation is relatively minor because of the predominant hydrothermal inflow. Nahcolite precipitates when and where pCO₂ is high, notably near sublacustrine spring discharge. Results from Nasikie Engida show that hot spring discharge has maintained the lake for at least 2 kyr, and that the evaporite formation is strongly influenced by local discharge of carbon dioxide. Brine evolution and evaporite deposition at Nasikie Engida help to explain conditions under which ancient sodium carbonate evaporites formed, including those in other East African rift basins, the Eocene Green River Formation (western USA), and elsewhere.     

Targeting carbon dioxide removal in the European Union

In principle, many climate policymakers have accepted that large-scale carbon dioxide removal (CDR) is necessary to meet the Paris Agreement’s mitigation targets, but they have avoided proposing by whom CDR might be delivered. Given its role in international climate policy, the European Union (EU) might be expected to lead the way. But among EU climate policymakers so far there is little talk on CDR, let alone action. Here we assess how best to ‘target’ CDR to motivate EU policymakers exploring which CDR target strategy may work best to start dealing with CDR on a meaningful scale. A comprehensive CDR approach would focus on delivering the CDR volumes required from the EU by 2100, approximately at least 50 Gigatonnes (Gt) CO₂, according to global model simulations aiming to keep warming below 2°C. A limited CDR approach would focus on an intermediate target to deliver the CDR needed to reach ‘net zero emissions’ (i.e. the gross negative emissions needed to offset residual positive emissions that are too expensive or even impossible to mitigate). We argue that a comprehensive CDR approach may be too intimidating for EU policymakers. A limited CDR approach that only addresses the necessary steps to reach the (intermediate) target of ‘net zero emissions’ is arguably more achievable, since it is a better match to the existing policy paradigm and would allow for a pragmatic phase-in of CDR while avoiding outright resistance by environmental NGOs and the broader public.

Key policy insights

• Making CDR an integral part of EU climate policy has the potential to significantly reshape the policy landscape.

• Burden sharing considerations would probably play a major role, with comprehensive CDR prolonging the disparity and tensions between progressives and laggards.

• Introducing limited CDR in the context of ‘net zero’ pathways would retain a visible primary focus on decarbonization but acknowledge the need for a significant enhancement of removals via ‘natural’ and/or ‘engineered’ sinks.

• A decarbonization approach that intends to lead to a low level of ‘residual emissions’ (to be tackled by a pragmatic phase-in of CDR) should be the priority of EU climate policy.

     

Fossil insect evidence for late pleistocene paleoenvironments of the lamb spring site,Colorado

The study of Quarternary insect fossils has shown their value as paleoenvironmental indicators, especially during times of rapid climatic change, and this method is now being introduced into North America archeological studies. Abundant insect fossils have been recovered from 13,000 year old detrital organic materials from silty clays at the Lamb Spring site, south of Denver, Colorado. The spring deposits also contain bones of extinct camel and mammoth, thought to have been modified by human hunters. The late Pleistocene insect fauna from Lamb Spring comprises 71 identified taxa from 6 orders and 14 families, principally beetles, providing substantial paleoenvironmental data. The beetle fauna is a mixture of grassland and mountain elements, and they appear to represent an environment similar to that found today in high mountain valleys, such as South Park, Colorado. Based on this fauna, mean summer temperatures at 13,140 B.P. were probably 10°C cooler than present.     

Mapping and monitoring carbon stocks with satellite observations: a comparison of methods

Mapping and monitoring carbon stocks in forested regions of the world, particularly the tropics, has attracted a great deal of attention in recent years as deforestation and forest degradation account for up to 30% of anthropogenic carbon emissions, and are now included in climate change negotiations. We review the potential for satellites to measure carbon stocks, specifically aboveground biomass (AGB), and provide an overview of a range of approaches that have been developed and used to map AGB across a diverse set of conditions and geographic areas. We provide a summary of types of remote sensing measurements relevant to mapping AGB, and assess the relative merits and limitations of each. We then provide an overview of traditional techniques of mapping AGB based on ascribing field measurements to vegetation or land cover type classes, and describe the merits and limitations of those relative to recent data mining algorithms used in the context of an approach based on direct utilization of remote sensing measurements, whether optical or lidar reflectance, or radar backscatter. We conclude that while satellite remote sensing has often been discounted as inadequate for the task, attempts to map AGB without satellite imagery are insufficient. Moreover, the direct remote sensing approach provided more coherent maps of AGB relative to traditional approaches. We demonstrate this with a case study focused on continental Africa and discuss the work in the context of reducing uncertainty for carbon monitoring and markets.     

Modeling spatially non-stationary land use/cover change in the lower Connecticut River Basin by combining geographically weighted logistic regression and the CA-Markov model

Simulating land use/cover change (LUCC) and determining its transition rules have been a focus of research for several decades. Previous studies used ordinary logistic regression (OLR) to determine transition rules in cellular automata (CA) modeling of LUCC, which often neglected the spatially non-stationary relationships between driving factors and land use/cover categories. We use an integrated geographically weighted logistic regression (GWLR) CA-Markov method to simulate LUCC from 2001–2011 over 29 towns in the Connecticut River Basin. Results are compared with those obtained from the OLR-CA-Markov method, and the sensitivity of LUCC simulated by the GWLR-CA-Markov method to the spatial non-stationarity-based suitability map is investigated. Analysis of residuals indicates better goodness of fit in model calibration for geographically weighted regression (GWR) than OLR. Coefficients of driving factors indicate that GWLR outperforms OLR in depicting the local suitability of land use/cover categories. Kappa statistics of the simulated maps indicate high agreement with observed land use/cover for both OLR-CA-Markov and GWLR-CA-Markov methods. Similarity in simulation accuracy between the methods suggests that the sensitivity of simulated LUCC to suitability inputs is low with respect to spatial non-stationarity. Therefore, this study provides critical insight on the role of spatial non-stationarity throughout the process of LUCC simulation.     

Differential sensitivity of flounder (Platichthys flesus) in response to oestrogenic chemical exposure: an issue for design and interpretation of monitoring and research programmes

This study was conducted as an initial investigation of 'differential response' in one of the main sentinel organisms used for monitoring programmes in United Kingdom estuaries, the flounder Platichthys flesus. It has been hypothesised that monitoring using species with a wide geographical spread and limited migration, such as flounder, might result in the comparison of different genetic stocks and certainly of populations with differing early life stage contaminant exposure histories. Furthermore, it is probable that these pre-exposure and genetic differences could manifest themselves in an ability to respond differently to contaminant exposure, so-called 'differential response'. It is important that the extent and nature of this response is understood, if we want to be able to fully interpret the monitoring data from such programmes. During this study, flounder were collected from four separate sources; wild caught fish from the estuaries of the Rivers Alde, Mersey and Tyne, and farmed flounder from Port Erin Farm, Isle of Man. Under controlled laboratory conditions, groups of fish from each source were exposed to water-borne concentrations of the synthetic oestrogen ethynylestradiol (EE2) at a nominal concentration of 50 ng/l. Plasma was taken from each male fish after 6 and 10 days exposure and analysed for the presence of vitellogenin (VTG) using an ELISA technique. Significant levels of VTG induction were evident in fish from all sources after both 6 and 10 days exposure. Flounder from the Mersey were the only fish with significantly elevated initial background levels of VTG (day 0) and this appeared to be reflected in that these specimens showed the highest induction response after day 6. However, after day 10, fish from all other sites had a slightly higher mean VTG than those from the Mersey which showed significantly (p < 0.05) lower mean plasma VTG. It is suggested that other differential responses may have been masked by the use of a high dose of EE2 which produced maximum induction in nearly all fish. The findings of the study are discussed in terms of implications for further research into the differential response issue and how the initial plasma VTG figures contribute to a time-series from the Mersey, Tyne and Alde estuaries.     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Seismic stratigraphy and subsidence analysis of the southern Brazilian margin (Campos,Santos and Pelotas basins)

The Campos, Santos and Pelotas basins have been investigated in terms of 2D seismo-stratigraphy and subsidence. The processes controlling accommodation space (e.g. eustacy, subsidence, sediment input) and the evolution of the three basins are discussed. Depositional seismic sequences in the syn-rift Barremian to the drift Holocene basin fill have been identified. In addition, the subsidence/uplift history has been numerically modeled including (i) sediment flux, (ii) sedimentary basin framework, (iii) relation to plate-tectonic reconfigurations, and (iv) mechanism of crustal extension. Although the initial rift development of the three basins is very similar, basin architecture, sedimentary infill and distribution differ considerably during the syn-rift sag to the drift basin stages. After widespread late Aptian–early Albian salt and carbonate deposition, shelf retrogradation dominated in the Campos Basin, whereas shelf progradation occurred in the Santos Basin. In the Tertiary, these basin fill styles were reversed: since the Paleogene, shelf progradation in the Campos Basin contrasts with overall retrogradation in the Santos Basin. In contrast, long-term Cretaceous–Paleogene shelf retrogradation and intense Neogene progradation characterize the Pelotas Basin. Its specific basin fill and architecture mainly resulted from the absence of salt deposition and deformation. These temporally and spatially varying successions were controlled by specific long-term subsidence/uplift trends. Onshore and offshore tectonism in the Campos and Santos basins affected the sediment flux history, distribution of the main depocenters and occurrence of hydrocarbon stratigraphic–structural traps. This is highlighted by the exhumation and erosion of the Serra do Mar, Serra da Mantiqueira and Ponta Grossa Arch in the hinterland, as well as salt tectonics in the offshore domain. The Pelotas Basin was less affected by changes in structural regimes until the Eocene, when the Andean orogeny caused uplift of the source areas. Flexural loading largely controlled its development and potential hydrocarbon traps are mainly stratigraphic.     

Experimental formation of massive hydrate deposits from accumulation of CH4 gas bubbles within synthetic and natural sediments

In order for methane to be economically produced from the seafloor, prediction and detection of massive hydrate deposits will be necessary. In many cases, hydrate samples recovered from seafloor sediments appear as veins or nodules, suggesting that there are strong geologic controls on where hydrate is likely to accumulate. Experiments have been conducted examining massive hydrate accumulation from methane gas bubbles within natural and synthetic sediments in a large volume pressure vessel through temperature and pressure data, as well as visual observations. Observations of hydrate growth suggest that accumulation of gas bubbles within void spaces and at sediment interfaces likely results in the formation of massive hydrate deposits. Methane hydrate was first observed as a thin film forming at the gas/water interface of methane bubbles trapped within sediment void spaces. As bubbles accumulated, massive hydrate growth occurred. These experiments suggest that in systems containing free methane gas, bubble pathways and accumulation points likely control the location and habit of massive hydrate deposits.