Litterfall dynamics and nutrient decomposition of arid mangroves in the Gulf of California: Their role sustaining ecosystem heterotrophy

This study shows results on litterfall dynamics and decay in mangrove stands of Avicennia germinans distributed along a latitudinal gradient (three forest sites) in the Gulf of California, in order to assess whether internal sources could support the observed mangrove ecosystem organic deficit in this arid tropic. Total mean annual litterfall production increased southward (712.6 ± 53.3, 1501.3 ± 145.1 and 1506.2 ± 280.5 g DW m⁻² y⁻¹, in the Yaqui, Mayo and Fuerte areas respectively), leaves being the main component of litter in all locations during the entire year, followed by fruits. The wet season (June–September) showed the highest litterfall rates through fruits. The temporal trend of litterfall production was significantly explained through mean air temperature (R² = 68%) whilst total annual litter production in the entire region showed a statistically significant relationship with total soil phosphorus, salinity, total nitrogen, organic matter and tree height (R² = 0.67). Throughout 117 days of the decomposition experiment, the litter lost 50% of its original dry weight in 5.8 days (average decay rate of 0.032 ± 0.04 g DW d⁻¹) and there were not significant differences in the remaining mass after 6 days. The percentage of both C and P released from the litter correlated significantly with the ratio of tidal inundated days to total experiment days (R² = 0.62, p = 0.03 and R² = 0.67, p = 0.02, respectively); however, the frequency of tidal inundation only showed a significant increase in C release from Avicennia litter after 6 and above 48 days of decomposition. Whereas the total C content of litter bags decreased linearly over the decomposition to (% Total C = 5.52 − 0.46 days, R² = 0.81, p = 0.0005), N content displayed an irregular pattern with a significant increase of decay between 48 and 76 days from the beginning of the experiment. The pattern for relative P content of litter revealed reductions of up to 99% of the original (%tot-P = −9.77 to 1.004 days, R² = 0.72, p = 0.01) although most of the P reduction occurred between 17 and 34 days after the experiment started. Soil N and P contents, which exhibited significant differences in the course of the decomposition experiment, appeared to show significant differences between sampling sites, although they were not related to tidal influence, nor by leaf and nutrient leaching. In a global basis, C/N litter ratios decreased linearly (C/N = 32.86 − 0.1006 days, R² = 0.62, p = 0.02), showing a strong and significant correlation with meteorological variables (R² = 0.99, p = 0.01). C/P ratios of litter increased through an exponential function (C/P = 119.35e^0.04day, R² = 0.89, p < 0.001). Changes in the remaining percentage of litter mass during the experiment were significantly correlated with soil C/N ratio (R² = 0.56, p = 0.03) as well as with the soil C/P ratio (R² = 0.98, p < 0.001). Our results of litter decomposition dynamics in this mangrove support the fact of null net primary productivity of the arid mangrove wetlands: fast litter decomposition compensates the ecosystem organic deficit in order to sustain the mangrove productivity. Litter decomposition plays a key role in the ecosystem metabolism in mangroves of arid tropics.     

Lateglacial and Holocene palaeohydrology in the western Mediterranean region: The Lake Estanya record (NE Spain)

The multi-proxy analysis of sediment cores recovered in karstic Lake Estanya (42°02′ N, 0°32′ E; 670 m a. s. l., NE Spain), located in the transitional area between the humid Pyrenees and the semi-arid Central Ebro Basin, provides the first high-resolution, continuous sedimentary record in the region, extending back the last 21 000 years. The integration of sedimentary facies, elemental and isotopical geochemistry and biogenic silica, together with a robust age model based on 17 AMS radiocarbon dates, enables precise reconstruction of the main hydrological and environmental changes in the region during the last deglaciation.Arid conditions, represented by shallow lake levels, predominantly saline waters and reduced organic productivity occurred throughout the last glacial maximum (21–18 cal kyrs BP) and the lateglacial, reaching their maximum intensity during the period 18–14.5 cal kyrs BP (including Heinrich event 1) and the Younger Dryas (12.9–11.6 cal kyrs BP). Less saline conditions characterized the 14.5–12.6 cal kyrs BP period, suggesting higher effective moisture during the Bölling/Allerød. The onset of more humid conditions started at 9.4 cal kyrs, indicating a delayed hydrological response to the onset of the Holocene which is also documented in several sites of the Mediterranean Basin. Higher, although fluctuating, Holocene lake levels were punctuated by a mid Holocene arid period between 4.8 and 4.0 cal kyrs BP. A major lake-level rise occurred at 1.2 cal kyrs BP, conducive to the establishment of conditions similar to the present and interrupted by a last major water level drop, occurring around 800 cal yrs BP, which coincides with the Medieval Climate Anomaly.The main hydrological stages in Lake Estanya are in phase with most Western Mediterranean and North Atlantic continental and marine records, but our results also show similarities with other Iberian and northern African reconstructions, emphasizing peculiarities of palaeohydrological evolution of the Iberian Peninsula during the last deglaciation.     

Performance comparison of three predictor selection methods for statistical downscaling of daily precipitation

Predictor selection is a critical factor affecting the statistical downscaling of daily precipitation. This study provides a general comparison between uncertainties in downscaled results from three commonly used predictor selection methods (correlation analysis, partial correlation analysis, and stepwise regression analysis). Uncertainty is analyzed by comparing statistical indices, including the mean, variance, and the distribution of monthly mean daily precipitation, wet spell length, and the number of wet days. The downscaled results are produced by the artificial neural network (ANN) statistical downscaling model and 50 years (1961–2010) of observed daily precipitation together with reanalysis predictors. Although results show little difference between downscaling methods, stepwise regression analysis is generally the best method for selecting predictors for the ANN statistical downscaling model of daily precipitation, followed by partial correlation analysis and then correlation analysis.     

Active surface faulting or landsliding in the Lower Tagus Valley (Portugal)? A solved controversy concerning the Vila Chã de Ourique site

The Lower Tagus Valley has experienced significant (M 6–7) historical seismicity, evidencing the presence of seismogenic faults. These are still deficiently known due to the low strain rates and the recent alluvial sedimentation of the Tagus River that buries most of the structures, though Paleoseismic evidence was allegedly found by a research team in the Tagus valley, at a site 60 km N of Lisbon, near Vila Chã de Ourique (VCO). According to this team, trenching at the VCO site exposed an active thrust fault, evidencing the surface rupture of a large earthquake that occurred in 1531. Our studies performed at this site, comprising field observations with a reappraisal of the trench outcrops previously excavated, borehole drilling, soil mechanics laboratory testing, and seismic reflection acquisition, pointed to the alternative interpretation that the outcropping structures are gravitational and not of tectonic origin. The interpretation of new outcrops crosscutting the structures exposed at the trenches, as well as newly acquired high-resolution seismic reflection data, definitely exclude the active thrust fault explanation and support a gravitational slip model for all the observed structures. Gravitational slip in the river bank slope was promoted by low shear strength clays and high pore water pressure coupled with slope toe river erosion. Gravitational slides must have occurred prior to development of the present sedimentation level of the Tagus alluvial plain, which was attained in the last few thousand years as indicated by borehole data and estimations of sedimentation rates.     

Ventilation revealed by the observation of dissolved oxygen concentration south of the Kuroshio Extension during 2012–2013

From the moored buoy observation at \(33.9^{\circ }\)N, \(144.9^{\circ }\)E south of the Kuroshio Extension (KE), we obtained Eulerian time series of dissolved oxygen concentration (DO) at 200, 400, and 600 m depths from June 2012 to March 2013. We observed ventilation by meso- and submesoscale processes that transport water southward across the KE jet. First, the cyclonic mesoscale eddy in June 2012 substantially depressed DO at depths of 400 and 600 m but maintained DO at 200 m, suggesting near-surface lateral transport of high-DO water derived from the north of the KE. Second, subduction of high-DO (>230 \({\upmu }\)mol kg\(^{-1}\)) water to a depth of 600 m was observed from early February to March 2013, associated with a mesoscale/submesoscale meandering of the KE jet. In mid-March 2013, shipboard hydrographic data were collected where the water mass at the mooring site would be advected by the eastward current on the southern flank of the KE. Based on these data, the subduction event was identified as an intrusion of an anomalously thick water mass from approximately 400–900 dbar. Ventilation of the subtropical mode water at a depth of 200 m around a subsurface DO maximum layer was detected as a rapid rise in DO in January 2013. This occurred after a significant seasonal decrease in DO at a rate of \(-0.130 \pm 0.007\) \({\upmu }\)mol kg\(^{-1}\) day\(^{-1}\) from July to December 2012.     

Field application of calcite Dispersed Alkaline Substrate (calcite-DAS) for passive treatment of acid mine drainage with high Al and metal concentrations

Passive treatment systems are widely used for remediation of acid mine drainage (AMD), but existing designs are prone to clogging or loss of reactivity due to Al- and Fe-precipitates when treating water with high Al and heavy metal concentrations. Dispersed alkaline substrate (DAS) mixed from a fine-grained alkaline reagent (e.g. calcite sand) and a coarse inert matrix (e.g. wood chips) had shown high reactivity and good hydraulic properties in previous laboratory column tests. In the present study, DAS was tested at pilot field scale in the Iberian Pyrite Belt (SW Spain) on metal mine drainage with pH near 3.3, net acidity 1400–1650 mg/L as CaCO₃, and mean concentrations of 317 mg/L Fe (95% Fe(II)), 311 mg/L Zn, 74 mg/L Al, 20 mg/L Mn, and 1.5–0.1 mg/L Cu, Co, Ni, Cd, As and Pb. The DAS-tank removed an average of 870 mg/L net acidity as CaCO₃ (56% of inflow), 25% Fe, 93% Al, 5% Zn, 95% Cu, 99% As, 98% Pb, and 14% Cd, but no Mn, Ni or Co. Average gross drain pipe alkalinity was 181 mg/L as CaCO₃, which increased total Fe removal to 153 mg/L (48%) in subsequent sedimentation ponds. Unfortunately, the tank suffered clogging problems due to the formation of a hardpan of Al-rich precipitates. DAS lifetime could probably be increased by lowering Al-loads.     

Speciation and Mobility of Selected Trace Metals (As, Cu, Mn, Pb and Zn) in Sediment with Depth in Cam River-Mouth, Haiphong, Vietnam

The speciation and mobility of some selected trace metals (As, Cu, Mn, Pb and Zn) in sediments with depth was investigated in the Cam River-mouth (Vietnam) by collecting sediment cores and analysing porewater and sediment composition, complemented with single (ammonium-EDTA) and sequential (BCR 3-step) extractions and mineralogical analysis (XRD). All trace metals show overall decreasing trends with depth in porewater as a result of anthropogenic input in upper sediment layers. High porewater concentrations of As, Mn and Pb in oxic and suboxic sediment layers may result in groundwater pollution. Sediment-bound Pb and Mn dominate in the reducible and the acid-soluble fraction, respectively, while Cu and Zn distribute rather evenly between four extracted fractions. The porewater metal speciation, as predicted by a geochemical model Visual MINTEQ version 3.0, indicates that the toxicity of Cu, Mn, Pb and Zn (presented by the proportions of free metal ions) decreases with depth, while the toxicity of As increases when As(III) becomes more abundant. The dissolved concentrations of trace metals are not only controlled by the precipitation/dissolution of discrete hydroxide/oxide, carbonate and phosphate minerals, but also by sorption processes on major sorbents (i.e. As on goethite, and Mn and Zn on calcite and dolomite). Sulphide minerals do not show any control even in the anoxic zone most likely because of the low concentration of sulphur.     

Long-term fluid circulation in extensional faults in the central Catalan Coastal Ranges: P–T constraints from neoformed chlorite and K-white mica

The neoformation of chlorite and K-white mica in fault rocks from two main faults of the central Catalan Coastal Ranges, the Vallès and the Hospital faults, has allowed us to constrain the P–T conditions during fault evolution using thermodynamic modeling. Crystallization of M1 and M2 muscovite and microcline occured as result of deuteric alteration during the exhumation of the pluton (290 °C > T > 370 °C) in the Permian. After that, three tectonic events have been distinguished. The first tectonic event, attributed to the Mesozoic rifting, is characterized by precipitation of M3 and M4 phengite together with chlorite and calcite C1 at temperatures between 190 and 310 °C. The second tectonic event attributed to the Paleogene compression has only been identified in the Hospital fault with precipitation of low-temperature calcite C2. The shortcut produced during inversion of the Vallès fault was probably the responsible for the lack of neoformed minerals within this fault. Finally, the third tectonic event, which is related to the Neogene extension, is characterized in the Vallès fault by a new generation of chlorite, associated with calcite C4 and laumontite, formed at temperatures between 125 and 190 °C in the absence of K-white mica. Differently, the Hospital fault is characterized by the precipitation of calcite C3 during the syn-rift stage at temperatures around 150 °C and by low-temperature fluids precipitating calcites C5, C6 and PC1 during the post-rift stage. During the two extensional events (Mesozoic and Neogene), faults acted as conduits for hot fluids producing anomalous high geothermal gradients (50 °C/km minimum).     

Interaction of peridotite with Ca-rich carbonatite melt at 3.1 and 6.5 GPa: Implication for merwinite formation in upper mantle,and for the metasomatic origin of sublithospheric diamonds with Ca-rich suite of inclusions

We performed an experimental study, designed to reproduce the formation of an unusual merwinite?+?olivine-bearing mantle assemblage recently described as a part of a Ca-rich suite of inclusions in sublithospheric diamonds, through the interaction of peridotite with an alkali-rich Ca-carbonatite melt, derived from deeply subducted oceanic crust. In the first set of experiments, we studied the reaction between powdered Mg-silicates, olivine and orthopyroxene, and a model Ca-carbonate melt (molar Na:K:Ca?=?1:1:2), in a homogeneous mixture, at 3.1 and 6.5 GPa. In these equilibration experiments, we observed the formation of a merwinite?+?olivine-bearing assemblage at 3.1 GPa and 1200 °C and at 6.5 GPa and 1300–1400 °C. The melts coexisting with this assemblage have a low Si and high Ca content (Ca#?=?molar 100?×?Ca/(Ca?+?Mg)?>?0.57). In the second set of experiments, we investigated reaction rims produced by interaction of the same Ca-carbonate melt (molar Na:K:Ca?=?1:1:2) with Mg-silicate, olivine and orthopyroxene, single crystals at 3.1 GPa and 1300 °C and at 6.5 GPa and 1400 °C. The interaction of the Ca-carbonate melt with olivine leads to merwinite formation through the expected reaction: 2Mg₂SiO₄ (olivine)?+?6CaCO₃ (liquid)?=?Ca₃MgSi₂O₈ (merwinite)?+?3CaMg(CO₃)₂ (liquid). Thus, our experiments confirm the idea that merwinite in the upper mantle may originate via interaction of peridotite with Ca-rich carbonatite melt, and that diamonds hosting merwinite may have a metasomatic origin. It is remarkable that the interaction of the Ca-carbonate melt with orthopyroxene crystals does not produce merwinite both at 3.1 and 6.5 GPa. This indicates that olivine grain boundaries are preferable for merwinite formation in the upper mantle.     

Geochemical features of aerosols in Santiago de Chile from time series analysis

Santiago, the capital of Chile, suffers from high air pollution levels, especially during winter. An extensive particulate matter (PM) monitoring and analysis program was conducted to quantify elemental concentrations of PM. Size-resolved PM samples (PM_2.5 and PM_10–2.5) from the La Paz and Las Condes stations in Santiago (2004–2005) were analyzed using ICP-MS. Most trace element concentrations (Cu, Pb, Zn, Mn, V, Sb, Pb and As) were higher during winter than during summer and were also higher at the La Paz station than at the Las Condes station. During the highest pollution events, As concentrations in PM_2.5 (16 ng m^?3) exceeded the annual average standard value (6 ng m^?3). A 10-year time series showed decreasing Pb and As concentrations and slightly increasing Zn, Cu and Mn concentrations. Concentrations of Cr and Ni remained relatively constant. The implementation of new public policies in 1998 may explain the decreasing concentrations of Pb and As. Enrichment factor (EF) calculations identified two principal groups: elements with EF < 10 (Mg, Y, Zr, U Sr, Ca, Ti, and V) and EF > 10 (Rb, K, Cs, Fe, P, Ba, Mn, Ni, Cr, Co, Zn, Sn, Pb, Cu, Mo, Cd, As, Ag, and Sb), which were related to natural and anthropogenic PM sources, respectively. Three main PM sources were identified using factor analysis: a natural source (crustal matter and marine aerosol), combustion and copper smelting. Three other sources were identified using rare earth elements: fluid catalytic crackers, oil-fired power production and catalytic converters.