Geology, Geochemistry and Genesis of the Hongshijing Gold Deposit in Ruoqiang,Xinjiang

1IntroductionTheHongshijinggolddepositislocatedinthenorthofLuobupouLakeofRuoqiang ,about 30 0kmsouthwestofHamiCity ,Xinjiang .ItwasdiscoveredbytheSixthGeologicalTeamofXinjiangduringgeo chemicalexploration .TheHongshijinggolddeposit,whichoccursinthegold bearingformationcomposedofMiddleandLateCarboniferousvolcanicandpyroclasticrocks ,isabrittle ductileshearzonetypegolddepositcontrolledbyariftbelt.TheHongshijinggolddepositislocatedinthesouthwestoftheHongshi jing -Maotoushanmineralizationb…     

Gneiss-Water Interaction and Water Evolution During the Early Stages of Dissolution Experiments at Room Temperature

Gneiss-distilled water interaction at room temperature was investigated with batch-reactors to study water-rock reaction and geochemical evolution of the aqueous phase with time. The ion concentrations in water were controlled not only by the dissolution of primary minerals, but also by the precipitation of secondary minerals. The decreasing fraction sizes of gneiss could favor dissolution and precipitation simultaneously. Ca^2 and K^ were the major cations, and HCO3^- was the major anion in water. All the ions except Ca^2 increased in concentration with time. The Ca^2 release from the rock to the aqueous phase was initially much faster than the release of K^ , Na^2 and Mg^2 . But after about 5 - 24 hours, the Ca^2 concentrations in water decreased very slowly with time and became relatively stable. During the experiment, the water varied from the Ca-( K)-HCO3-type water to the K-Ca-HCO3-type water, and then to the K-(Ca, Na)-HCO3-type water. The water-gneiss interaction was dominated by the dissolution of Kfeldspar in the solution. The remaining secondary minerals were mainly kaolinite, illite and K (Mg) -mica.     

Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data

Short period surface waves, recorded during a seismic refractionsurvey in the Sannio region (Southern Italy), have been modeled to infera shallow velocity model for the area. Based on the decrease of resolutionwith depth, due to the bias on group velocity estimates arising frominterference of the Rayleigh waves with higher modes, we carried out aprocedure of fitting, with synthetic seismograms, of selected filtered traceswith a gaussian filter, having a width at half height equal to 1 Hz and acentral frequency lying in the range [1,4] Hz. We estimated the likelihoodbetween synthetic and observed seismograms by measuring their semblance.In this way we were able to infer a more refined local velocity modelcharacterized by a high Vp and Vs vertical gradient in the sedimentarycover. Two ad hoc resolution studies, based on group velocity andamplitude data respectively, indicate that the local velocity model is a goodvelocity model also for the entire studied area. The increase in the numberof available data when using amplitude information allows us to make amore selective choice in the model parameter space (Vp and Vs of eachlayer) and to solve for the Vp/Vs ratio. The inferred Vp velocity in thehalf-space is equal to 2.8 km/s. This value is in excellent agreement withthat inferred by other authors (3 km/s) by modeling P-wave travel timevs. distance. The best-fit model furnish low Vp/Vs for the sedimentarycover so indicating a high degree of the sediment's compaction in thestudied area. The inferred shallow high-velocity gradient indicates thatthe shallow sedimentary layer in the area could trap and focus the energytraveling into it.     

Analytical Model for Permeability Evolution in Microcracking Rock

— Analytical expressions to predict the enhancement of permeability due to stress-induced microcracking in initially low porosity rock are presented. A fracture mechanical microcrack model is employed to derive integrated effective hydraulic variables as a function of stress, which are then used to calculate the evolution of permeability using the statistically-based Dienes model. The model enables determination of permeability enhancement as a function of two loading parameters and three material parameters. Results are in reasonable agreement with experimental measurements and indicate that appreciable increases in permeability can be anticipated during brittle failure. The analytical nature of the model makes it easily incorporatable into numerical models that require quantification of the permeability evolution as a function of stress, for which there is currently no law.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Fine structure of Pn velocity beneath Sichuan-Yunnan region

We use 23298 Pn arrival-time data from Chinese national and provincial earthquake bulletins to invert fine structure of Pn velocity and anisotropy at the top of the mantle beneath the Sichuan-Yunnan and its adjacent region. The results suggest that the Pn velocity in this region shows significant lateral variation; the Pn velocity varies from 7.7 to 8.3 km/s. The Pn-velocity variation correlates well with the tectonic activity and heat flow of the region. Low Pn velocity is observed in southwest Yunnan, Tengchong volcano area, and the Panxi tectonic area. These areas have very active seismicity and tectonic activity with high surface heat flow. On the other hand, high Pn velocity is observed in some stable regions, such as the central region of the Yangtze Platform; the most pronounced high velocity area is located in the Sichuan Basin, south of Chengdu. Pn anisotropy shows a complex pattern of regional deformation. The Pn fast direction shows a prominent clockwise rotation pattern from east of the Tibetan block to the Sichuan-Yunnan diamond block to southwest Yunnan, which may be related to southeastward escape of the Tibetan Plateau material due to the collision of the Indian Plate to the Eurasia Plate. Thus there appears to be strong correlation between the crustal deformation and the upper mantle structure in the region. The delay times of events and stations show that the crust thickness decreases from the Tibetan Plateau to eastern China, which is consistent with the results from deep seismic sounding.     

Failure Mode and Spatial Distribution of Damage in Rothbach Sandstone in the Brittle-ductile Transition

— To elucidate the spatial complexity of damage and evolution of localized failure in the transitional regime from brittle faulting to cataclastic ductile flow in a porous sandstone, we performed a series of triaxial compression experiments on Rothbach sandstone (20% porosity). Quantitative microstructural analysis and X-ray computed tomography (CT) imaging were conducted on deformed samples. Localized failure was observed in samples at effective pressures ranging from 5 MPa to 130 MPa. In the brittle faulting regime, dilating shear bands were observed. The CT images and stereological measurements reveal the geometric complexity and spatial heterogeneity of damage in the failed samples. In the transitional regime (at effective pressures between 45 MPa and 130 MPa), compacting shear bands at high angles and compaction bands perpendicular to the maximum compression direction were observed. The laboratory results suggest that these complex localized features can be pervasive in sandstone formations, not just limited to the very porous aeolian sandstone in which they were first documented. The microstructural observations are in qualitative agreement with theoretical predictions of bifurcation analyses, except for the occurrence of compaction bands in the sample deformed at effective pressure of 130 MPa. The bifurcation analysis with the constitutive model used in this paper is nonadequate to predict compaction band formation, may be due to the neglect of bedding anisotropy of the rock and multiple yield mechanisms in the constitutive model.