Uptake of petroleum hydrocarbons by the Blue Mussel (Mytilus edulis L.) after Experimental Oiling and High Pressure, Hot Water Shore cleaning

High pressure, hot water shore cleaning after an oil spill will release high concentrations of petroleum hydrocarbons to ambient marine ecosystems. The immediate increase of hydrocarbons observed in blue mussels, Mytilus edulis, went from background concentrations of 40 μg/g to 657 μg/g and 533 μg/g at a distance of 3 and 8m respectively from the shore. After two weeks the accumulated oil had decreased by 20–45 %. In comparison natural surf and ice cleaning of shores will only produce a small increase in hydrocarbon concentrations. We recommend that high pressure, hot water cleaning is not used in areas where no special bird or wild life protection is needed.     

Shallow gas depth-contour map of the Skagerrak-western Baltic Sea region

A shallow gas depth-contour map covering the Skagerrak-western Baltic Sea region has been constructed using a relatively dense grid of existing shallow seismic lines. The digital map is stored as an ESRI® shape file in order to facilitate comparison with other data from the region. Free gas usually occurs in mud and sandy mud but is observed only when sediment thickness exceeds a certain threshold value, depending on the water depth of the area in question. Gassy sediments exist at all water depths from approx. 20 m in the coastal waters of the Kattegat to 360 m in the Skagerrak. In spite of the large difference in water depths, the depth of free gas below seabed varies only little within the region, indicating a relatively fast movement of methane in the gas phase towards the seabed compared to the rate of diffusion of dissolved methane. Seeps of old microbial methane occur in the northern Kattegat where a relatively thin cover of sandy sediments exists over shallow, glacially deformed Pleistocene marine sediments. Previous estimates of total methane escape from the area may be correct but the extrapolation of local methane seepage rate data to much larger areas on the continental shelf is probably not justified. Preliminary data on porewater chemistry were compared with the free gas depth contours in the Aarhus Bay area, which occasionally suffers from oxygen deficiency, in order to examine if acoustic gas mapping may be used for monitoring the condition of the bay.     

Total oxyradical scavenging capacity and cell membrane stability of haemocytes of the Arctic scallop,Chlamys islandicus,following benzo(a)pyrene exposure

Industrial activities, notably oil and gas industries, are expanding in the Arctic. Most of the biomarkers were developed using temperate organisms living at temperatures above 10 degrees C. Little is known about the biomarker responses of organisms living between -1.88 and 5 degrees C. Therefore, assessment of the toxicity of chemicals to cold-water adapted species is required. In this study, the Arctic scallop, Chlamys islandicus, was selected as a key species for bio-monitoring because of wide distribution in Arctic waters and its commercial value. Test animals, stored in seawater at 2 degrees C, were injected with benzo(a)pyrene (diluted in cod liver oil 5 mg ml(-1)) in the adductor muscle every 24 h for four days giving a final dose of 0, 74 and 90.6 mg kg(-1) wet weight for control, low and high dose, respectively. The biomarkers used were total oxyradical scavenging capacity (TOSC) in the digestive gland and cell membrane stability of haemocytes. TOSC values were significantly reduced (ca. 30%) in exposed groups (P < 0.05), indicating a depletion in oxyradical molecular scavengers. The antioxidant defences appeared to be overwhelmed by the reactive oxygen species as the plasma membranes of haemocytes were destabilised (P < 0.05) probably due to lipid peroxidation. These data indicate that reactive oxygen species (ROS) were produced by Arctic scallops via the metabolisation of benzo(a)pyrene at 2 degrees C.     

Marine seismics with a pulsed combustion source and Pseudo Noise codes

There has been a long-standing debate concerning how dangerous seismic surveys are with respect to marine life. Marine seismic work today is dominated by airgun technology, where high energy is generated by a release of compressed air into the water. The objective of the “Time coded impulse seismic technique” project is to examine whether a new low energy acoustic source can be used for seismic purposes. If the method turns out to be successful, the low output energy and continuous operation will make the source suitable in environmental sensitive areas. The Low level Acoustic Combustion Source (LACS) is a petrol driven pulsed underwater acoustic source. It operates at a few meters depth, and each shot can be digitally controlled from the surface by a computer located in the mother vessel. A presentation of the recorded LACS signal characteristics, the modulation, the Pseudo Noise coding/decoding principles and field test results, is given. The importance of using an optimized code with fine resolution and of using the near field recording as a correlator sequence is demonstrated. Clear correlation peaks could then be seen from the bottom and sub bottom reflectors.     

Sedimentological parameters and erosion behaviour of submarine coastal sediments in the south-western Baltic Sea

The aim of this study was to evaluate the erodibility of submarine coastal sediments for the purpose of modelling sediment dynamics in Mecklenburg Bay, south-western Baltic Sea. Erosion thresholds derived from experiments with a device microcosm on cores of fine sand (n=5, mean grain size=132 µm) and mud (n=5, medium silt size, mean=21 µm), collected at different times of the year, were compared to theoretical critical shear stress velocities based on grain-size measurements. For this purpose, a sedimentological map of natural surface sediments was constructed for the study area. Calculated values for critical shear stress velocities (u* _{cr-Hjulström} ) are 1.2 cm s^?1 for fine sand, and 3.75 cm s^?1 for cohesive mud. At the mud station, erosion experiments showed an initial transport of the fluffy surface layer (u* _cr-initial ) at a mean critical shear stress velocity of 0.39 cm s^?1. Initial rolling transport at the fine sand station for single sand grains was recorded at values of 0.5 cm s^?1. At higher shear stress velocities, the two sediment types showed diverging erosion behaviour. Measurable erosion (ε>5.0×10^?6 kg m^?2 s^?1) of fine sand starts at a mean critical shear stress velocity (u* _cr-erosion ) of 1.15 cm s^?1 whereas fluffy surface material on mud cores was eroded at mean u* _cr-erosion of 0.62 cm s^?1. This indicates that measured erosion thresholds at the fine sand site fit well to calculated critical shear stress velocities whereas calculated erosion thresholds for cohesive mud are roughly 6 times higher than measured values. As erosion behaviour at the mud station was dominated by fluffy surface material, the comparability of measured and calculated threshold values may be reduced. The underlying silt-sized sediment itself was stable due to cohesive effects. This behaviour has to be taken into consideration by using sediment types instead of mean grain sizes for mapping and modelling sediment dynamics. A comparison of the near-bottom hydrodynamic conditions in the study area and experimentally derived critical shear stress velocities suggests that particle transport is controlled by storm events whereas under calm conditions shear stress velocities do not exceed the critical values.     

Cenozoic alongslope processes and sedimentation on the NW European Atlantic margin

Based on studies of sediment accumulations deposited from-and erode by-alongslope flowing ocean currents on the European continental margin from Porcupine (Ireland) to Lofoten (Norway), the evolution of the Cenozoic paleocirculation was reconstructed as part of the STRATAGEM project. There is evidence of ocean current-controlled erosion and deposition in the Rockall Trough, in the Faeroe-Shetland Channel and on the Vøring Plateau since the late Eocene, although the circulation pattern remains ambiguous. The late Palaeogene flow in the Rockall Trough was almost probably driven by southerly-derived Tethyan Outflow Water. The extent and strength of any northerly-derived flow is uncertain. From the early Neogene (early-mid-Miocene), there was a massive regional expansion of contourite drift development both in the North Atlantic and in the Norwegian-Greenland Sea. This was most probably related to the development of the Faroe Conduit, the opening of the Fram Strait and the general subsidence of the Greenland-Scotland Ridge. These may have combined to cause a considerable acceleration in the exchange and overflow of deep waters between the Arctic and Atlantic Oceans. An early late Neogene (late early Pliocene) regional erosional event has been ascribed to a vigorous pulse of bottom-current activity, most probably the result of a global reorganisation of ocean currents associated with the closure of the Central American Seaway. During the late Neogene, contourites and sediment drifts developed in deep-water basins, between units of glacigenic sediments as well as infill of several paleo-slide scars. These sediments were derived from areas of bottom-current erosion as well as from the development of Plio-Pleistocene prograding sediment wedges, incorporating the extensive sediment supply derived from shelf-wide ice sheets. Presently a profound winnowing prevails along the shelf and upper slope due to the inflowing currents of Atlantic water. Depocentres of sediments derived from the winnowing are located (locally) in lower slope embayments and in slide scars.     

Mildly peraluminous high-silica granites in a continental rift: the Drammen and Finnemarka batholiths,Oslo Rift,Norway

The peraluminous Drammen batholith (650 km²) is the largest granite complex within the mainly alkaline province of the Permo-Carboniferous Oslo Rift, and peraluminous to metaluminous granites are also present in the southern part of the otherwise alkaline Finnemarka complex (125 km²). The emplacement of the Drammen granite, and probably most of the other biotite granite complexes, predate the alkaline syenites and granites. The eight separate petrographic types of the Drammen batholith range in SiO₂ from 70 to 79 wt.% and have experienced variable amounts of fractionation of feldspars, biotite, zircon, apatite, titanite and Fe–Ti-oxides. The initial Sr, Nd and Pb isotopic ratios and a decoupling between the variations in the SiO₂ content and the aluminum saturation index [ASI=Al₂O₃/(CaO+Na₂O +K₂O)] show that the various intrusive phases are not strictly comagmatic. The _Nd values of the southern part of Finnemarka (+3.5 to +4) and the northern part of the Drammen granite (+1 to +1.5) are high and indicate insignificant (for Finnemarka) to minor Precambrian crustal or enriched mantle contributions. The very low _Sr values of all of these samples (–1 to –12, outside the main Oslo Rift magmatic array), point to a time integrated Rb-depleted crustal contaminant or an EM1 mantle component. The earliest extruded alkali basalts along the southwestern margin of the Oslo Rift are the only other samples within this low _Sr area, but their isotopic signature may also be linked to a mantle enrichment event (involving an EM1 component), e.g. associated with the Fen carbonatite magmatism 540 Ma ago. For a given ²⁰⁶Pb/²⁰⁴Pb, the ²⁰⁸Pb/²⁰⁴Pb ratios of the Drammen and Finnemarka batholiths are distinctly lower than those of the Skien alkaline volcanics and all other magmatic Oslo Rift rocks. This may indicate that the lithosphere of the central part of the rift had a time integrated Th-depletion. The samples from the southern part of the Drammen batholith, characterized by the presence of abundant miarolitic cavities, have _Nd near 0 (–0.7 to +0.4) but strongly elevated _Sr of +35 to +67. The combined Pb isotopic ratios of all the samples analyzed indicate that the Precambrian crustal anatectic contribution is in the form of time integrated Th-and U-depleted lower crust, and the high +_Sr of the sourthern part of the Drammen granite results from shallow level wallrock assimilation or magma-fluid interactions. The remarkably low contribution of old crustal components to the Finnemarka and the northernmost Drammen batholiths may result from extensive late Precambrian intracustal differentiation in southwestern Scandinavia, leading to widespread upper crustal granites ( 900 Ma) and a correspondingly dense and refractory lower crust, in particular in a zone intersecting the central part of the rift. Liquidus phase relations and mass-balance constrainst permit derivation of the granites from mildly alkaline to tholeiitic melts by extensive crystal fractionation of clinopyroxene-and amphibole-rich assemblages. It is equally possible to form the granitic magmas by partial melting of Permian gabbros of similar composition. Either scenario is consistent with the isotopic constrainst and with the presence of dense cumulates and/or residues in the lower crust. The lack of igneous rocks of intermediate composition associated with the Drammen and Finnemarka batholiths point to an efficient upper crustal density filtering. Considerable amounts of heat would be accumulated in this region if differentiated, intermediate melts could not escape to shallower levels. Successive magma injections would therefore easily result in partial melting of already solidified mafic to intermediate melts and cumulates, and it is suggested that the peraluminous granites formed mainly by water-undersaturated anatexis of mafic material.     

Constancy of the refraction constant

The flexure term and a correction to the atmospheric refraction constant calculated from meteorological data may be determined from the zenith distances of FK5 stars observed each night on a meridian circle. All such determinations on meridian circles and vertical circles have been corrupted-and in fact dominated-byinternal refraction which is often larger than 1" and quite variable. After removing internal refraction by a simple equipment at the CAMC on La Palma, it became apparent that the true flexure and the true correction to the calculated refraction constant vary by less than 0."09 (rms) from night to night. This is a reduction of the estimated uncertainty of these quantities by a factor of about four. This improvement is expected at any meridian circle which is equipped with sufficiently precise (photoelectric) micrometers if internal refraction were removed.Alternative forms of the observation equation for declinations are discussed. Observations over a period of two months may be solved in oneglobal least-squares solution keeping the refraction and the flexure terms constant. Furthermore, one per star is obtained, instead of a different each night for each star.