MIDAS-W: a workstation-based incoherent scatter radar data acquisition system

The Millstone Hill Incoherent Scatter Data Acquisition System (MIDAS) is based on an abstract model of an incoherent scatter radar. This model is implemented in a hierarchical software system, which serves to isolate hardware and low-level software implementation details from higher levels of the system. Inherent in this is the idea that implementation details can easily be changed in response to technological advances. MIDAS is an evolutionary system, and the MIDAS hardware has, in fact, evolved while the basic software model has remained unchanged. From the earliest days of MIDAS, it was realized that some functions implemented in specialized hardware might eventually be implemented by software in a general-purpose computer. MIDAS-W is the realization of this concept. The core component of MIDAS-W is a Sun Microsystems UltraSparc 10 workstation equipped with an Ultrarad 1280 PCI bus analog to digital (A/D) converter board. In the current implementation, a 2.25 MHz intermediate frequency (IF) is bandpass sampled at 1 s intervals and these samples are multicast over a high-speed Ethernet which serves as a raw data bus. A second workstation receives the samples, converts them to filtered, decimated, complex baseband samples and computes the lag-profile matrix of the decimated samples. Overall performance is approximately ten times better than the previous MIDAS system, which utilizes a custom digital filtering module and array processor based correlator. A major advantage of MIDAS-W is its flexibility. A portable, single-workstation data acquisition system can be implemented by moving the software receiver and correlator programs to the workstation with the A/D converter. When the data samples are multicast, additional data processing systems, for example for raw data recording, can be implemented simply by adding another workstation with suitable software to the high-speed network. Testing of new data processing software is also greatly simplified, because a workstation with the new software can be added to the network without impacting the production system. MIDAS-W has been operated in parallel with the existing MIDAS-1 system to verify that incoherent scatter measurements by the two systems agree. MIDAS-W has also been used in a high-bandwidth mode to collect data on the November, 1999, Leonid meteor shower.     

Uncertainties in projected impacts of climate change on European agriculture and terrestrial ecosystems based on scenarios from regional climate models

The uncertainties and sources of variation in projected impacts of climate change on agriculture and terrestrial ecosystems depend not only on the emission scenarios and climate models used for projecting future climates, but also on the impact models used, and the local soil and climatic conditions of the managed or unmanaged ecosystems under study. We addressed these uncertainties by applying different impact models at site, regional and continental scales, and by separating the variation in simulated relative changes in ecosystem performance into the different sources of uncertainty and variation using analyses of variance. The crop and ecosystem models used output from a range of global and regional climate models (GCMs and RCMs) projecting climate change over Europe between 1961–1990 and 2071–2100 under the IPCC SRES scenarios. The projected impacts on productivity of crops and ecosystems included the direct effects of increased CO₂ concentration on photosynthesis. The variation in simulated results attributed to differences between the climate models were, in all cases, smaller than the variation attributed to either emission scenarios or local conditions. The methods used for applying the climate model outputs played a larger role than the choice of the GCM or RCM. The thermal suitability for grain maize cultivation in Europe was estimated to expand by 30–50% across all SRES emissions scenarios. Strong increases in net primary productivity (NPP) (35–54%) were projected in northern European ecosystems as a result of a longer growing season and higher CO₂ concentrations. Changing water balance dominated the projected responses of southern European ecosystems, with NPP declining or increasing only slightly relative to present-day conditions. Both site and continental scale models showed large increases in yield of rain-fed winter wheat for northern Europe, with smaller increases or even decreases in southern Europe. Site-based, regional and continental scale models showed large spatial variations in the response of nitrate leaching from winter wheat cultivation to projected climate change due to strong interactions with soils and climate. The variation in simulated impacts was smaller between scenarios based on RCMs nested within the same GCM than between scenarios based on different GCMs or between emission scenarios.     

Addressing Scottish rural fuel poverty through a regional industrial symbiosis strategy for the Scottish forest industries sector

Tackling fuel poverty is central to the delivery of the Scottish Executive’s commitment to social justice. Many Scottish rural households are not linked into the mains gas network and rely on expensive alternatives, despite being surrounded by plentiful supplies of low-cost renewable wood biomass. A regional study was undertaken to establish the potential market for pelletised wood fuel, available as a low-value by-product from the rapidly expanding Scottish forest industry sector. The wider implications of the research findings are analysed by extending the principles of industrial symbiosis from a site-specific to a regional scale. Promoting an indigenous pellet-based wood fuel market for rural Scotland would fulfil important Scottish Executive economic, social and environmental sustainability objectives. Adding off-site social symbiotic elements increases the potential for on-site technical symbiosis in nascent Scottish forest industry clusters. At present, market failure is preventing the realisation of these benefits, and the paper concludes by identifying ways in which market intermediation, through wood fuel energy service companies, might overcome the current barriers to exploiting such symbiosis.     

Thermal diffusivity of olivine

The thermal diffusivity of a naturally occurring polycrystalline olivine (Fo₉₁Fa₀₉) was measured by the Flash technique in the temperature range of 450–1500 K. At 450 K the thermal diffusivity was 10.7 × 10^?7 m²/s and decreased as a function of reciprocal temperature to 7.0 × 10^?7 m²/s at 800 K. From that temperature, the values gradually increased to a maximum of 7.8 × 10^?7 m²/s at 1000 K, and then steadily decreased to 5.6 × 10^?7 m²/s at 1500 K. The unusual decrease above 1000 K was caused by a reduction of the previously oxidized samples. The olivine's oxidation state plays a significant role in the value of thermal diffusivity at high temperatures.     

Simulating the moderating effect of a lake on downwind temperatures

A steady-state, two-dimensional numerical model is used to simulate air temperatures and humidity downwind of a lake at night. Thermal effects of the lake were modelled for the case of moderate and low surface winds under the cold-air advective conditions that occur following the passage of a cold front. Surface temperatures were found to be in good agreement with observations. A comparison of model results with thermal imagery indicated the model successfully predicts the downwind distance for which thermal effects due to the lake are significant.     

Origin of the Blue Ridge escarpment along the passive margin of Eastern North America

The Blue Ridge escarpment is a rugged landform situated within the ancient Appalachian orogen. While similar in some respects to the great escarpments along other passive margins, which have evolved by erosion following rifting, its youthful topographic expression has inspired proposals of Cenozoic tectonic rejuvenation in eastern North America. To better understand the post‐orogenic and post‐rift geomorphic evolution of passive margins, we have examined the origin of this landform using low‐temperature thermochronometry and manipulation of topographic indices. Apatite (U–Th)/He and fission‐track analyses along transects across the escarpment reveal a younging trend towards the coast. This pattern is consistent with other great escarpments and fits with an interpretation of having evolved by prolonged erosion, without the requirement of tectonic rejuvenation. Measured ages are also comparable specifically to those measured along other great escarpments that are as much as 100 Myr younger. This suggests that erosional mechanisms that maintain rugged escarpments in the early post‐rift stages may remain active on ancient passive margins for prolonged periods. The precise erosional evolution of the escarpment is less clear, however, and several end‐member models can explain the data. Our preferred model, which fits with all data, involves a significant degree of erosional escarpment retreat in the Cenozoic. Although this suggests that early onset of topographic stability is not required of passive margin evolution, more data are required to better constrain the details of the escarpment's development.     

Whaling: will the Phoenix rise again?

It is argued that Japan’s authorities and entrepreneurs involved in whaling and the whale-meat trade have a long-term goal of rebuilding a large and profitable industry of pelagic whaling, particularly in the Southern Hemisphere, in the next 20 years or so. They have made large investments in this enterprise since the so-called moratorium on commercial whaling was adopted by the International Whaling Commission in 1982. These include, but are not confined to, state subsidizing of an expanding and diversifying 20-year programme of commercial whaling under provisions in all relevant international agreements since 1937 that permit unlimited and unilaterally decreed whaling, supposedly for scientific purposes, provided that the commodities from the whales killed are fully utilized. The context of this is the monopoly of technical knowledge, special skills and the market for valuable whale-meat that Japanese enterprises acquired in the post-world war II period, having broken - in 1937 - the strongly defended de facto Anglo-Norwegian monopoly of technology, skills, access to Antarctic whaling grounds and the market for whale-oil that had existed until then. The attraction of ‘scientific whaling’ is not only that it by-passes any internationally agreed catch-limits but that it also circumvents all other rules - many dating fr/om the League of Nations whaling convention of 1931 - regarding protected species, closed areas, killing of juveniles, less inhumane killing methods, etc. The groundwork is being laid to justify that resumed whaling on partially recovered whale stocks will be at the unsustainable levels that will be profitable again. This justification is based on spurious assertions that numerous and hungry whales threaten the world’s fisheries, and that the abundance and possible increase in some whale species is impeding the recovery of other, severely depleted, and potentially more valuable species such as the blue whale. If the scenario presented here is correct it has important implications for attempts by the international community either to bring a negotiated end to commercial whaling or to bring all whaling back under international control, as the international law of the sea requires, and to ensure that any permitted exploitation of recovered whale populations will be sustainable, under a precautionary regime.     

运用STOMP数值模拟器进行多空介质中尿素水解以及方解石沉淀数值模拟

遍布于美国能源部所辖野外场地的地下放射性核素和痕量金属污染对美国能源部的长期监管职能提出了最严峻的挑战。目前较有前景的一个原地固化污染物方法是利用尿素酶催化尿素水解,进而推动方解石沉淀及与之共同沉淀。运用STOMP数值模拟器实施一系列反应性溶质数值模拟来研究系统中水流、运移、反应与反应导致的介质性质变化之间的紧密的非线性耦合,并在研究中系统性增加反应系统的复杂度和物理-化学的非均质性以考察模拟效果。通过调整反应速率表达式中尿素酶浓度和沉淀反应常数,对尿素水解和方解石沉淀速率进行了敏感度分析。结果显示:尿素水解速率是矿物沉淀总量的决定性因素,沉淀物的空间分布既取决于水解速率也取决于沉淀速率;在一维水流柱6个空隙体积的时间段模拟中,观察到了5%的最大空隙度减少;当二维模拟中考虑一个低渗透性包裹体时,被改变的流场重新对生成的沉淀组成物进行了分布,形成了扭曲的反应锋面。模拟结果也显示沉淀在低渗透性区域边界上形成,这说明位于这个区域里面的污染物可能被囊裹而从流线中被隔离起来。     

Sampling and Characterizing Rare Earth Elements in Groundwater in Deep-Lying Fractures in Granitoids Under In Situ High-Pressure and Low-Redox Conditions

Several countries are preparing to dispose of radioactive nuclear waste deep underground in crystalline rock. This type of bedrock is commonly extensively fractured and consequently carries groundwater that serves as a medium for transporting metals and radionuclides. A group of metals of particular interest in this context is the rare earth elements (REEs), because they are analogues of actinides contained within radioactive waste and are tracers of hydrological pathways and geochemical processes. Concentrations of REEs are commonly low in these groundwaters, leading to values below detection limits of standard monitoring methods, particularly for the heavy REEs. We present a new technical set-up for monitoring REEs (and other trace metals) in groundwater in fractured crystalline rock. The technique consists of passing the fracture groundwater, commonly under high pressure and containing reduced chemical species, through a device that maintains the physicochemical character of the groundwater. Within the device, diffusive gradient in thin-film (DGT) discs are installed in triplicate. With this set-up, we studied REEs in groundwater in fractures at depths of approximately ?144, ?280, and ?450 m in granitoids in the Äspö Hard Rock Laboratory in southern Sweden. The entire REE suite was detected (concentrations down to 0.1 ng L^?1) and was differently fractionated among the groundwaters. The shallowest groundwater, composed of dilute modern Baltic Sea water, was enriched in the heavy REEs, whereas the deeper groundwaters, dominated by old saline water, were depleted in the heavy REEs. Deployment periods varying from 1 to 4 weeks delivered similar REE concentrations, indicating stability and reproducibility of the experimental set-up. The study finds that 1 week of deployment may be enough. However, if the overall setting and construction allow for longer deployment times, 2–3 weeks will be optimal in terms of reaching reliable REE concentrations well above the detection limit while maintaining the performance of the DGT samplers.