Origin and palaeo‐environments of calcareous sediments in the Moshaweng dry valley,southeast Botswana

Quaternary sedimentation in the Moshaweng dry valley of southeastern Botswana is evaluated on the basis of geomorphological evolution and sedimentological analyses. Stratigraphic evidence reveals an upper surface (1095 m) containing abundant sil‐calcrete, an intermediate surface (1085 m) in which sil‐calcrete underlies nodular calcrete and lower (1075 m) surface in which sil‐calcrete and nodular calcrete are interbedded. This subdivision is reflected in the geochemical composition of the sediments which show an overall trend of decreasing SiO₂ content (and increasing CaCO₃ content) with depth from the highest to the lowest surface levels. The calcretes and sil‐calcretes represent modifications of pre‐existing detrital Kalahari Group sand and basal Kalahari pebbles which thinned over a Karoo bedrock high. Modification took place during wet periods when abundant Ca⁺⁺‐rich groundwater flowed along the structurally aligned valley system. With the onset of drier conditions, water table fluctuations led to the precipitation of nodular calcretes in the phreatic layer to a depth of about 20 m. A major geochemical change resulted in the preferential silicification of the nodular calcrete deposits. Conditions for silica mobilization may be related to drying‐induced salinity and in situ geochemical differentiation brought about by pebble dissociation towards the top of the sediment pile. As calcretization and valley formation progressed to lower levels, silica release took place on a diminishing scale. Thermoluminescence dating infers a mid‐Pleistocene age for sil‐calcrete formation suggesting that valley evolution and original calcrete precipitation are much older. Late stage dissolution of CaCO₃ from pre‐existing surface calcretes or sil‐calcretes led to the formation of pedogenic case‐hardened deposits during a time of reduced flow through the Moshaweng system possibly during the upper or late Pleistocene. Copyright © 2002 John Wiley & Sons, Ltd.     

Algorithms for Lunar Flash Video Search, Measurement, and Archiving

Lunar meteoroid impact flashes provide a method to estimate the flux of the large meteoroid flux and thus their hazard to spacecraft. Although meteoroid impacts on the Moon have been detected using video methods for over a decade, the difficulty of manually searching hours of video for the rare, extremely brief impact flashes has discouraged the technique’s systematic implementation. A prototype has been developed for the purpose of automatically searching lunar video records for impact flashes, eliminating false detections, editing the returned possible flashes, and archiving and documenting the results. Several utilities for measurement, analysis, and location of the flashes on the moon included in the program are demonstrated. Application of the program to a year’s worth of lunar observations is discussed along with examples of impact flashes.     

A primer on upscaling tools for porous media

Over the last few decades a number of powerful approaches have been developed to intelligently reduce the number of degrees of freedom in very complex heterogeneous environs, e.g. mathematical homogenization, mixture and hybrid mixture theory, spatial averaging, moment methods, central limit or Martingale methods, stochastic-convective approaches, various other Eulerian and Lagrangian perturbation schemes, projection operators, renormalization group techniques, variational approaches, space transformational methods, continuous time random walks, and etc. In this article we briefly review many of these approaches as applied to specific examples in the hydrologic sciences.     

Surface water resources for prehistoric peoples in western Papaguer?́a of the North American south-west

Water for personal use was a limiting factor for the prehistoric and historic indigenous peoples who inhabited the extremely arid North American region of south-western Arizona and north-western Sonora, known as Papaguer?́a. This paper lists and quantifies the perennial and intermittent water resources available to them. In the 16,824 km²study area of the Sonoran Desert, there were 128 waterholes, most of them in the mountains and, when full, these offered at least 3,099,141 l of water. At today's precipitation levels, virtually all points of the region were accessible to inhabitants within a 40 km radius of one or more water sources.     

Rhyolitic ignimbrites in the Rogerson Graben,southern Snake River Plain volcanic province: volcanic stratigraphy,eruption history and basin evolution

The 80 km long NNE-trending Rogerson Graben on the southern margin of the central Snake River Plain, Idaho, USA, hosts a rhyolitic pyroclastic succession, 200 m thick, that records a period of successive, late-Miocene, large-volume explosive eruptions from the Yellowstone–Snake River Plain volcanic province, and contemporaneous extension. The succession, here termed the Rogerson Formation, comprises seven members (defined herein) and records at least eight large explosive eruptions with numerous repose periods. Five high-grade and extremely high-grade ignimbrites are intercalated with three non-welded ignimbrites and two volcaniclastic deposits, with numerous repose periods (palaeosols) throughout. Two of the ignimbrites are dominantly rheomorphic and lava-like but contain subordinate non-welded pyroclastic layers. The ignimbrites are typical Snake River Plain high-silica rhyolites, with anhydrous crystal assemblages and high inferred magmatic temperatures (≤ 1,025°C). We tentatively infer that the Jackpot and Rabbit Springs Members may have been emplaced from the Bruneau–Jarbidge eruptive centre on the basis of: (1) flow lineation trends, (2) crystal assemblage, and (3) radiometric age. We infer that the overlying Brown’s View, Grey’s Landing, and Sand Springs Members may have been emplaced from the Twin Falls eruptive centre on the basis of: (1) kinematic indicators (from the east), and (2) crystal assemblage. Furthermore, we have established the contemporaneous evolution of the Rogerson Graben from the emplacement of the Jackpot Member onwards, and infer that it is similar to younger half-graben along the southern margin of the Snake River Plain, formed by local reactivation of Basin and Range structures by the northeastwardly migration of the Yellowstone hot-spot. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Coaxial coil towed EMI sensor array for UXO detection and characterization

A new broadband electromagnetic induction (EMI) array sensor, GEM-5, for detecting and characterizing Unexploded Ordnance (UXO) has been developed in order to provide high production rates for EMI surveys. The sensor consists of a single rectangular loop transmitter around a linear array of seven pairs of coaxial receiver coils, with each coil in a pair located at the same vertical distance above and below the loop transmitter. The coil pairs are wired in an inverted series so that the signal consists of the difference between the voltage induced in the upper and lower coils. This particular configuration provides a high degree of primary field cancellation, dense spatial sampling rate due to simultaneous and continuous operation of all sensors, suppression of motion-induced and environmental noise, and strong source fields at typical UXO burial depths providing deep detection range. Our prototype tests indicate that the array yields a lower static and motion-induced noise over the critical low frequencies than that of existing sensors, and in particular, the signal-to-noise ratio at 90 Hz is 32 dB higher. Environmental noise can be largely removed from the difference measurements. The field test results from UXO test sites show that the prototype sensor has smoother background and appears to detect more seeded targets than the GEM-3 concentric sensor, however some of that gain can be attributed to higher power transmitter electronics.     

Assimilating transient groundwater flow data via a localized ensemble Kalman filter to calibrate a heterogeneous conductivity field

A localized ensemble Kalman filter (EnKF) method is developed to assimilate transient flow data to calibrate a heterogeneous conductivity field. To update conductivity value at a point in a study domain, instead of assimilating all the measurements in the study domain, only limited measurement data in an area around the point are used for the conductivity updating in the localized EnKF method. The localized EnKF is proposed to solve the problems of the filter divergence usually existing in a data assimilation method without localization. The developed method is applied, in a synthetical two dimensional case, to calibrate a heterogeneous conductivity field by assimilating transient hydraulic head data. The simulations by the data assimilation with and without localized EnKF are compared. The study results indicate that the hydraulic conductivity field can be updated efficiently by the localized EnKF, while it cannot be by the EnKF. The covariance inflation and localization are found to solve the problem of the filter divergence efficiently. In comparison with the EnKF method without localization, the localized EnKF method needs smaller ensemble size to achieve stabilized results. The simulation results by the localized EnKF method are much more sensitive to conductivity correlation length than to the localization radius. The developed localized EnKF method provides an approach to improve EnKF method in conductivity calibration.     

Improved edge detection mapping through stacking and integration: a case study in the Bathurst Mining Camp

Airborne geophysical surveys provide spatially continuous regional data coverage, which directly reflects subsurface petrophysical differences and thus the underlying geology. A modern geologic mapping exercise requires the fusion of this information to complement what is typically limited regional outcrop. Often, interpretation of the geophysical data in a geological context is done qualitatively using total field and derivative maps. With a qualitative approach, the resulting map product may reflect the interpreter's bias. Source edge detection provides a quantitative means to map lateral physical property changes in potential and non‐potential field data. There are a number of Source edge detection algorithms, all of which apply a transformation to convert local signal inflections associated with source edges into local maxima. As a consequence of differences in their computation, the various algorithms generate slightly different results for any given source depth, geometry, contrast, and noise levels. To enhance the viability of any detected edge, it is recommended that one combines the output of several Source edge detection algorithms. Here we introduce a simple data compilation method, deemed edge stacking, which improves the interpretable product of Source edge detection through direct gridding, grid addition, and amplitude thresholding. In two examples, i.e., a synthetic example and a real‐world example from the Bathurst Mining Camp, New Brunswick, Canada, a number of transformation algorithms are applied to gridded geophysical data sets and the resulting Source edge detection solutions combined. Edge stacking combines the benefits and nuances of each Source edge detection algorithm; coincident or overlapping and laterally continuous solutions are considered more indicative of a true edge, whereas isolated points are taken as being indicative of random noise or false solutions. When additional data types are available, as in our example, they may also be integrated to create a more complete geologic model. The effectiveness of this method is limited only by the resolution of each survey data set and the necessity of lateral physical property contrasts. The end product aims at creating a petrophysical contact map, which, when integrated with known lithological outcrop information, can be led to an improved geological map.