GPS network monitors the Arabia-Eurasia collision deformation in Iran

The rate of crustal deformation in Iran due to the Arabia–Eurasia collision is estimated. The results are based on new global positioning system (GPS) data. In order to address the problem of the distribution of the deformation in Iran, Iranian and French research organizations have carried out the first large-scale GPS survey of Iran. A GPS network of 28 sites (25 in Iran, two in Oman and one in Uzbekistan) has been installed and surveyed twice, in September 1999 and October 2001. Each site has been surveyed for a minimum observation of 4 days. GPS data processing has been done using the GAMIT-GLOBK software package. The solution displays horizontal repeatabilities of about 1.2 mm in 1999 and 2001. The resulting velocities allow us to constrain the kinematics of the Iranian tectonic blocks. These velocities are given in ITRF2000 and also relative to Eurasia. This last kinematic model demonstrates that (1) the north–south shortening from Arabia to Eurasia is 2–2.5 cm/year, less than previously estimated, and (2) the transition from subduction (Makran) to collision (Zagros) is very sharp and governs the different styles of deformation observed in Iran. In the eastern part of Iran, most of the shortening is accommodated in the Gulf of Oman, while in the western part the shortening is more distributed from south to north. The large faults surrounding the Lut block accommodate most of the subduction–collision transition.     

Imagining difference: the experiences of 'transnational' Indian IT professionals in Germany

In this paper we explore the motivations to migrate and the migration experiences of 22 Indian IT professionals in Germany. When studying skilled migration, Germany is an interesting case as it struggled with waves of extreme right activities whilst trying to attract IT professionals from outside the European Union at the same time. In this context, we are interested in the conflicts that the migrants may experience as a result of their desire or obligation to move, their specific cultural baggage and the way in which they encounter the different sides of German society.     

Dissolved iron(II) in the Pacific Ocean: Measurements from the PO2 and P16N CLIVAR/CO2 repeat hydrography expeditions

The redox speciation of dissolved iron in seawater was evaluated at 121 locations in the Pacific Ocean at depths of 15-1000 m, using the method of luminol chemiluminescence. The results indicate that reduced iron, Fe(II), is ubiquitous in surface seawater with a relatively consistent pattern of occurrence. Surface maxima were present in most profiles, with median concentrations of 25-30 pM representing 12-14% of the total dissolved iron. Concentrations decreased monotonically with depth to<12 pM within the upper euphotic zone. This pattern was observed during both day and nighttime sampling events, which suggests that non-photochemical production mechanisms can produce photochemical-like signatures. Further, if theoretical rates of Fe(II) oxidation are applicable to the open ocean, then the employed sampling methods precluded assessment of photochemically-produced Fe(II), regardless of ambient light conditions. For this and other reasons, the concentrations reported here for the upper water column likely represent lower limits of labile iron concentration, and suggest that dissolved iron may be more available for uptake than previously believed. Deeper in the water column, Fe(II) was also frequently detected, though it constituted a small fraction of the total dissolved iron. Possible source mechanisms at these depths include thermal (dark) reduction of Fe(III) organic complexes or remineralization of sinking biogenic particles containing Fe(II). In the northern Philippine Sea between the Japanese coast and the Izu-Bonin volcanic arc system, Fe(II) concentrations were found to be atypically high, possibly because of high atmospheric dust deposition near the surface and transport of sediment-derived iron at depth.     

Permeability and degassing of dome lavas undergoing rapid decompression: An experimental determination

The gas permeability of volcanic rocks may influence various eruptive processes. The transition from a quiescent degassing dome to rock failure (fragmentation) may, for example, be controlled by the rocks permeability, in as much as it affects the speed by which a gas overpressure in vesicles is reduced in response to decompression. Using a modified shock-tube-based fragmentation bomb (Alidibirov and Dingwell 1996a,b; Spieler et al. 2003a), we have measured unsteady-state permeability at a high initial pressure differential. Following sudden decompression above the rock cylinder, pressurized gas flows through the sample. Two pressure transducers record the pressure signals above and below the sample. A transient 1D filtration code has been developed to calculate permeability using the experimental decay curve of the lower pressure transducer. Additionally an analytical steady-state method to achieve permeability is presented as an alternative to swiftly predict the sample permeability in a sufficiently precise manner. Over 100 permeability measurements have been performed on samples covering a wide range of porosity. The results show a general positive relationship between porosity and permeability with a high data scatter. Our preferred interpretation of the results is a combination of two different, but overlapping effects. We propose that at low porosities, gas escape occurs predominantly through microcracks or elongated micropores and therefore could be described by simplified forms of Kozeny–Carman relations (Carman 1956) and fracture flow models. At higher porosities, the influence of vesicles becomes progressively stronger as they form an increasingly connected network. Therefore, a model based on the percolation theory of fully penetrable spheres is used, as a first approximation, to describe the permeability-porosity trend. In the data acquired to date it is evident, that in addition to the porosity control, the samples bubble size, shape and distribution strongly influence the permeability. This leads to a range of permeability values up to 2.5 orders of magnitude at a given porosity.     

Tectonic significance of Late Neoproterozoic granites from the Tibesti massif in southern Libya inferred from Sr and Nd isotopes and U–Pb zircon data

The Neoproterozoic crust of the Tibesti massif was stabilized by magmatism that included subduction-generated batholithic suites and post-orogenic granite plutons. All of the magmatism occurred in a period of about 20 million years centered around 550 Ma, and nearly all of the granites have initial ⁸⁷Sr/⁸⁶Sr ratios of about 0.706. The Wadi Yebigue pluton has U–Pb zircon ages of 563 Ma and 558 Ma on two different phases and ε_Nd at 550 Ma from −0.5 to −2.2. These isotopic data and the geologic history of the massif suggest that granites in the Tibesti massif developed during and shortly after closure of a short-lived ocean basin that developed by fragmentation of pre-existing continental crust of the Saharan region.     

Propagation of seasonal temperature signals into an aquifer upon bank infiltration

Infiltrating river water carries the temperature signal of the river into the adjacent aquifer. While the diurnal temperature fluctuations are strongly dampened, the seasonal fluctuations are much less attenuated and can be followed into the aquifer over longer distances. In one-dimensional model with uniform properties, this signal is propagated with a retarded velocity, and its amplitude decreases exponentially with distance. Therefore, time shifts in seasonal temperature signals between rivers and groundwater observation points may be used to estimate infiltration rates and near-river groundwater velocities. As demonstrated in this study, however, the interpretation is nonunique under realistic conditions. We analyze a synthetic test case of a two-dimensional cross section perpendicular to a losing stream, accounting for multi-dimensional flow due to a partially penetrating channel, convective-conductive heat transport within the aquifer, and heat exchange with the underlying aquitard and the land surface. We compare different conceptual simplifications of the domain in order to elaborate on the importance of different system elements. We find that temperature propagation within the shallow aquifer can be highly influenced by conduction through the unsaturated zone and into the underlying aquitard. In contrast, regional groundwater recharge has no major effect on the simulated results. In our setup, multi-dimensionality of the flow field is important only close to the river. We conclude that over-simplistic analytical models can introduce substantial errors if vertical heat exchange at the aquifer boundaries is not accounted for. This has to be considered when using seasonal temperature fluctuations as a natural tracer for bank infiltration.     

The nature and transport of the fine‐grained component of Swift Creek Landslide,Northwest Washington

Extreme sedimentation in Swift Creek, located in the Cascades foothills in NW Washington (48°55′N, 122°16′W), results from erosion of the oversteepened, unvegetated toe of a large (55 hectares) active landslide. Deposition of landslide‐derived sediment has necessitated costly mitigation projects in the channel including annual dredging and temporary sediment traps in an attempt to reduce the risk of flooding and damage to man‐made structures downstream. This study attempts to understand the process of sediment production along with the corresponding erosion rates of the sediment source to help with the development of mitigation plans and construction of optimal sediment reservoirs. The bedload and suspended sediment in the creek are a direct result of the weathering process of the serpentinitic bedrock underlying the landslide. The serpentinite does not weather to smectite clay, as previously thought. Instead, it weathers to asbestiform chrysotile with minor amounts of chlorite, illite and hydrotalcite, all of which occur in clay seeps on the unvegetated surface of the landslide. The chrysotile fibers average 2 µm in length and make up at least 50%, by volume, of the suspended load transported in Swift Creek. This study does not address the environmental or health implications of the asbestiform chrysotile transport or deposition. During the sampled time between February 2005 and February 2006, 127 discrete suspended sediment samples were collected and discharge was measured 66 times. The suspended sediment concentrations ranged from 0·02 g L^?1 to 41·6 g L^?1 and the discharge ranged from 0·0 m³ s^?1 to 0·5 m³ s^?1. A nonlinear functional model estimated the total suspended sediment flux from detailed precipitation records and discrete suspended sediment concentration and discharge measurements to be 910 t km^?2 yr^?1. When the suspended sediment flux is coupled with estimates of downstream deposition of coarse sediment, the estimated erosion rate for the entire Swift Creek landslide is 158 mm yr^?1. The majority of the material entering Swift Creek is presumed to originate on the unvegetated toe of the landslide, for which the erosion rate is thus approximately 1 m yr^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

Development and morphometry of drainage network in volcanic terrain, Central Anatolia, Turkey

This paper presents the results of morphotectonic and morphometric research carried out in order to determine the neotectonic development of the volcanic mountains and a drainage network in SW Cappadocia. The study area extends among the Aksaray, Ni?de, and Nev?ehir Provinces. The study area comprises Hasanda?, Melendiz, Keçiboyduran, Göllüda? Mountains and the adjacent parts of these volcanic mountains.Data collected exclusively from 1:25,000 digitised topographic maps and 10 m-resolution DEMs were used to define parameters related to the longitudinal profile of streams. The study area was divided into 10 volcanic units. Longitudinal profiles of 20 streams and stream orders were analysed to determine a regional tectonic differentiation pattern in these units. The streams in the study area drain into four different tectonic depressions. These depressions are Aksaray plain controlled by the Tuz Gölü fault (TGF), Çiftlik plain controlled by the Keçiboyduran–Melendiz fault (KMF), Misli plain controlled by the Derinkuyu fault (DF), and Bor plain controlled by the Ni?de Fault Zone (NFZ). An analysis of morphometric parameters shows that the development of a drainage network is associated with faults and rock resistance. Occurrence of morphometric parameters with different values in units reveals that the volcanic mountains were not uplifted in the same period and were subjected to different morphologic processes. High total order number in the south of Hasanda? (unit 3) and Melendiz Mountains (unit 7) indicate that the uplift ratio of the southern part is much greater than that of the northern part. Moreover, development of the drainage network in the south is in a more advanced phase than in the north. Indeed, the drainage network in the north is in the youngest erosional phase of all parts of the study area. The increased stream length-gradient indices (SL), and stream gradients and an analysis of headward erosion show that the streams displaying the longest and highest reach of the erosional phase are all in the southern part of Keçiboyduran and Melendiz Mountains. The longitudinal profile (Lp) of the present thalweg of the streams is irregular. The irregular Lp are associated with four different causes. These are geological variations in resistance, tectonics, and volcanic topography and downcutting in response to stream incision. The beginning of the fluvial incision in the northern part is younger than in the south.