Modelle instabiler Kompaktionsverläufe unter Sedimentation

Zusammenfassung Am Beispiel der Kompaktion von Sedimenten werden Grenzen der Quantifizierung geologischer Vorgänge aufgezeigt. Prozesse, die dazu neigen instabil zu werden, sind vorwiegend durch topologische, nur noch qualitativ erfaßbare Eigenschaften bestimmt. Besonders deutlich wird dies bei fluidization und liquidization von Sedimenten unter Eigenlast. In diesem Zusammenhang kann man von einem sedimentologischen Paradoxon sprechen. Zur qualitativen Untersuchung werden Differentialgleichungen und Differenzengleichungen eingesetzt.

---

By sedimentological examples it is shown that there are limits to quantify geological processes. Processes like fluidization and liquidization of sediments are dominated by topological qualitative properties rather than by quantitative parameters. The occurence of instabilities can be called a sedimentological paradoxon. The qualitative analysis is done by use of differential and difference equations.

---

Résumé La consolidation au cours de la sédimentation mène souvent pour quelques sédiments á des transformations instables telles que la liquidisation et la fluidification. La simulation mathématique offre la possibilité d'étudier ce paradoxe sédimentologique de faÇon qualitative ou semi-quantitative á l'aide d'équations différentielles et de différence.

---

. , , , . ., . . « ». , , .

---

---

Aus dem SFB 53 Tübingen, Fossil-Diagenese Nr. 30.     

Coalification anomalies induced by fluid flow at the Variscan thrust front: A numerical model of the palaeotemperature field

Geologie en Mijnbouw -     

Late-Variscan fluid migration at the Variscan thrust front of Eastern Belgium: numerical modelling of the palaeothermal and fluid flow field

Modelling of the palaeothermal field at the Variscan thrust front in eastern Belgium indicates significant temperature modifications by late-Variscan palaeofluids migrating from internal to peripheral parts of the orogen. A detailed set of calibration data (chlorite geothermometry, microthermometry, organic rank) gives evidence of temporary palaeotemperature variations at the Variscan thrust front obviously connected to the migration of hot, low saline palaeofluids. These thermal events likely enhanced organic maturation (vitrinite reflectance, conodont alteration) of Devonian and Carboniferous sediments, which accumulated long before the Variscan orogeny occurred. Numerical simulation (2D Finite Element method) of the palaeothermal field includes coupled heat transport by thermal conduction and fluid flow. Palaeothermal scenarios yield successive palaeotemperatures (200–300°C), which are indicated by the control data, due to relatively short-term fluid ascent along the detachment and the imbricate thrust front. The simulated flow velocities are up to tens of metre per year lasting several thousand years (non-steady-state solution). In the scenarios modelled, these thermal events occur in a realm of enhanced bulk temperatures due to elevated basal heat flow densities (90 mW m⁻²) and an additional burial depth of some kilometres. The simulated temperature enhancement due to fluids ascending at the Variscan thrust front is several tens degrees. The scenarios demonstrate long-distance fluid migration during or after deformation of the Palaeozoic basin and its effect on the palaeothermal field.     

Salinization problems in the NEGB: results from thermohaline simulations

The occurrence of salty waters close to the surface is a well-known problem in the North East German Basin. Previous numerical simulations showed that near-surface brine occurrences are due to the interaction of hydrostatic and thermally induced forces (mixed convection). The influence of hydraulic permeabilities and thermal conductivities on the observed patterns remained an open question. Based on a hydro-geochemical dataset, thermohaline simulations are carried out in order to quantify the impact of these physical parameters on brine migration. The results indicate that the salinity and temperature profiles are strongly controlled by hydraulic permeabilities and can locally be influenced by thermal conductivities.     

Groundwater vulnerability assessment for the karst aquifer of Tanour and Rasoun springs catchment area (NW-Jordan) using COP and EPIK intrinsic methods

Groundwater vulnerability maps were constructed for the surface water catchment area of Tanour and Rasoun spring (north-west of Jordan) using the COP and EPIK intrinsic groundwater vulnerability assessment methods. Tanour and Rasoun springs are the main water resources for domestic purposes within the study area. A detailed geological survey was carried out, and data of lithology, karst features, precipitation, vegetation and soil cover, etc. were gathered from various sources for the catchment area in order to determine the required parameters for each method. ArcGIS software was used for map preparation. In the resulting COP vulnerability map, spatial distribution of groundwater vulnerability is as follows: (1) high (37%), (2) moderate (34.8%), (3) low (20.1%), and (4) very low (8.1%). In the EPIK vulnerability map, only two out of four vulnerability classes characterize the catchment area: very high vulnerable areas (38.4%) and moderately vulnerable areas (61.6%). Due to limited soil thickness, the low vulnerability class is absent within the catchment. The high percentage of very high to moderately vulnerable areas displayed by both the COP and EPIK vulnerability assessment methods are reflected by different pollution events in Tanour and Rasoun karst springs especially during the winter season. The high sensitivity of the aquifer to pollution can be explained by different factors such as: thin or absent soil cover, the high development of the epikarst and karst network, and the lithology and confining conditions of the aquifer.     

Late Cretaceous–Cenozoic evolution of the North German Basin—results from 3-D geodynamic modelling

The Late Cretaceous–Cenozoic evolution of the North German Basin has been investigated by 3-D thermomechanical finite element modelling. The model solves the equations of motion of an elasto-visco-plastic continuum representing the continental lithosphere. It includes the variations of stress in time and space, the thermal evolution, surface processes and variations in global sea level.The North German Basin became inverted in the Late Cretaceous–Early Cenozoic. The inversion was most intense in the southern part of the basin, i.e. in the Lower Saxony Basin, the Flechtingen High and the Harz. The lower crustal properties vary across the North German Basin. North of the Elbe Line, the lower crust is dense and has high seismic velocity compared to the lower crust south of the Elbe Line. The lower crust with high density and high velocity is assumed to be strong. Lateral variations in lithospheric strength also arise from lateral variations in Moho depth. In areas where the Moho is deep, the upper mantle is warm and the lithosphere is thereby relatively weak.Compression of the lithosphere causes shortening, thickening and surface uplift of relatively weak areas. Tectonic inversion occurs as zones of preexisting weakness are shortened and thickened in compression. Contemporaneously, the margins of the weak zone subside. Cenozoic subsidence of the northern part of the North German Basin is explained as a combination of thermal subsidence and a small amount of deformation and surface uplift during compression of the stronger crust in the north.The modelled deformation patterns and resulting sediment isopachs correlate with observations from the area. This verifies the usefulness and importance of thermomechanical models in the investigation of intraplate sedimentary basin formation.     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Die EG‐Wasserrahmenrichtlinie: Ausweisung und Bewertung künstlicher und erheblich veränderter Gewässer

Designation and Assessment of Artificial and Heavily Modified Water Bodies under the EC Water Framework Directive The EC Water Framework Directive allows the Member States to designate artificial and heavily modified water bodies under specific conditions. For those water bodies the ecological assessment and the resulting programmes of measures will be based on the “maximum ecological potential” as reference conditions and not on the “high ecological status”, which has to be used for natural water bodies. Such designation is possible only, if the hydromorphology of the water bodies concerned has been substantially changed in character to maintain specified uses. The criteria for the designation are fulfilled, if restoration measures needed to meet the high ecological status would have significant adverse effects on the uses and if no other better environmental options would exist to maintain the specified uses. In late 1999 the EC‐Working Group on Heavily Modified Water Bodies (HMWB) has been established to develop criteria for the designation of artificial and heavily modified water bodies as well as for the determination of the maximum ecological potential. The working group has produced the guidance document “Identification and Designation of Artificial and Heavily Modified Water Bodies” in November 2002, which has been agreed by the European Water Directors on 21 November 2002 in Copenhagen. The guidance document is focusing on two time borders, the provisional identification of heavily modified water bodies until 2004 and the legally binding designation as artificial and heavily modified in the first river basin management plan in 2009 at the latest. The guidance document considered the main findings of 34 case studies for rivers, lakes, transitional and coastal waters carried out in 11 European countries. The results of the case studies as well as a summarizing synthesis were used as a fundamental basis to produce the guidance document. The practical examples given by the case studies were compiled as a toolbox which supplements the guidance for the purpose of its better application.