Proximal braidplain deposits in the Middle Devonian Malbaie Formation of Eastern Gaspé, Quebec, Canada

The Middle Devonian Malbaie Formation of Eastern Gaspé, Canada, comprises sharply alternating conglomerate and sandstone units. Their petrography suggests derivation from the same source, but palaeocurrents indicate different dispersal systems for the sand and gravel. The principal conglomerate facies is horizontally stratified, with well-developed imbrication, characteristic of deposition on a high-energy, proximal braidplain. Minor cross-stratified conglomerate shows well-defined size sorting, attributed to avalanching down foresets and sorting within minor bedforms on bar tops. The sandstone units mainly comprise erosion surfaces overlain by mudstone intraclasts, alternating with lineated low-angle to horizontally stratified sandstone or trough cross-stratified sandstone. The sandstone units were deposited on a proximal braidplain with highly variable discharge, but the absence of calcrete indicates that dry periods were not prolonged. The Malbaie is the coarsest, uppermost formation of a Devonian clastic wedge formed during the Acadian Orogeny. The uniformity of facies association and palaeocurrents, particularly in conglomerate units, indicates derivation from a broad upwarp to the south. This implies that the Acadian uplands resulted from straight compression, in contrast to the localized uplifts formed by strike-slip faulting during the Carboniferous.     

Impact of lake‐level changes on the formation of thermogene travertine in continental rifts: Evidence from Lake Bogoria,Kenya Rift Valley

Travertine is present at 20% of the ca 60 hot springs that discharge on Loburu delta plain on the western margin of saline, alkaline Lake Bogoria in the Kenya Rift. Much of the travertine, which forms mounds, low terraces and pool‐rim dams, is sub‐fossil (relict) and undergoing erosion, but calcite‐encrusted artefacts show that carbonate is actively precipitating at several springs. Most of the springs discharge alkaline (pH: 8·3 to 8·9), Na‐HCO₃ waters containing little Ca (<2 mg l^?1) at temperatures of 94 to 97·5°C. These travertines are unusual because most probably precipitated at temperatures of >80°C. The travertines are composed mainly of dendritic and platy calcite, with minor Mg‐silicates, aragonite, fluorite and opaline silica. Calcite precipitation is attributed mainly to rapid CO₂ degassing, which led to high‐disequilibrium crystal morphologies. Stratigraphic evidence shows that the travertine formed during several stages separated by intervals of non‐deposition. Radiometric ages imply that the main phase of travertine formation occurred during the late Pleistocene (ca 32 to 35 ka). Periods of precipitation were influenced strongly by fluctuations in lake level, mostly under climate control, and by related changes in the depth of boiling. During relatively arid phases, meteoric recharge of ground water declines, the lake is low and becomes hypersaline, and the reduced hydrostatic pressure lowers the level of boiling in the plumbing system of the hot springs. Any carbonate precipitation then occurs below the land surface. During humid phases, the dilute meteoric recharge increases, enhancing geothermal circulation, but the rising lake waters, which become relatively dilute, flood most spring vents. Much of the aqueous Ca²⁺ then precipitates as lacustrine stromatolites on shallow firm substrates, including submerged older travertines. Optimal conditions for subaerial travertine precipitation at Loburu occur when the lake is at intermediate levels, and may be favoured during transitions from humid to drier conditions.     

Braidplain deposition of the Upper Triassic Molteno Formation in the main Karoo (Gondwana) Basin, South Africa

ABSTRACT The Upper Triassic (Carnian?) Molteno Formation in the main Karoo (Gondwana) Basin, South Africa forms a northerly thinning, intracratonic clastic wedge comprising sandstones, shales and coals occurring within thick (up to 140 m) laterally persistent fining-upward sequences. These sequences were deposited by braided streams draining an alluvial plain which may have been built on to the distal slopes of alluvial fan complexes of glacial outwash type. Geometric relations between sequences indicate three phases of tectonic activity. The lowermost fining-upward sequence in the south accumulated against a rising mountain front; cessation of movement and an eastward shift in the main locus of tectonism and sedimentation was followed by renewed uplift and basinwide progradation of the second fining-upward sequence adjacent to a fault-block granite terrain located close to the present south-east coastline of South Africa. This is believed to be the granite at the eastern end of the Falkland Island Plateau, an interpretation consistent with its position on most continental reconstructions and the fracture zone marking its northern scarp face. Faulting is attributed to the first phase of extension prior to continental breakup. The sourceward recession and lack of gross fining-upward trends shown by the uppermost fining-upward sequences is accounted for by limited back-faulting of the still active basin margin. Cessation of activity and further basin margin recession occurred with deposition of the overlying floodplain deposits (Elliot Formation) which were distal equivalents of the braided alluvial plain.     

Submarine sedimentation on a developing Holocene fan delta

The submarine morphology, sediments, and three-dimensional geometry of a developing fan delta are described using data from acoustic surveys, bottom sampling, and observations from a manned submersible. The fan system is being built in a British Columbian fjord (water depth 410 m) supplied with coarse-grained sediments from a fjord-side river. Construction of the subaqueous fan began about 10–12,000 yr BP and is ongoing. The system is analogous to part of one fault-uplift sedimentation cycle in ancient fan deltas. Initially, when offshore relief was at a maximum, acoustically chaotic sediment wedges were emplaced over fjord-bottom glaciomarine deposits. Subsequent aggradation/progradation resulted in moderately dipping sequences interrupted by local chaotic units. The present fan surface (average slope 13°) is divided into six zones arranged concentrically from the fan apex, on the basis of form, sediment and process interpretations. Continued subaqueous fan growth results from settling of river-derived sediments from suspension and downslope sediment dispersal by episodic gravity flows, apparently fed by underflows from the river.     

A scanning electron microscope study of surface textures of quartz grains from glacial environments

Surface textures of quartz sand grains from several glacial environments at the Feegletscher, Switzerland examined by means of scanning electron microscopy are described. The difference between supraglacial and subglacial material is very slight. At the moment the interpretation of these textures must be done with care until the full statistical relation to environments can be ascertained. This does not necessarily invalidate earlier investigations although it does mean that glacial and extraglacial environments in the vicinity of glaciers are apparently not distinguishable. Examination of surface precipitation features suggests a sequence of events which can be used to help discriminate between different ages of deposits in an area. A similarity between some of the surface debris from moraine samples and those seen in loess and quickclay deposits is also suggested.     

Performance evaluation and work-load estimation for geographic information systems

Abstract

Agencies acquiring GIS hardware and software are faced with uncertainty at two levels: over the degree to which the proposed system will perform the functions required, and over the degree to which it is capable of doing so within proposed production schedules. As the field matures the second concern is becoming more significant. A formal model of the process of acquiring a GIS is presented, based on the conceptual level of defining GIS sub-tasks. The appropriateness of the approach is illustrated using performance data from the Canada Land Data System. It is possible to construct reasonably accurate models of system resource utilization using simple predictors and least squares techniques, and a combination of inductive and deductive reasoning. The model has been implemented in an interactive package for MS-DOS systems.     

Regional river flow,water quality,aquatic ecological impacts and recovery from drought

Abstract

During severe drought and low flows in the Otago Region of the South Island of New Zealand, increased bacterial contamination of rivers occurred in agricultural/pastoral catchments due to greater stock use of waterways and the lack of dilution and flushing flows. Concentrations and loadings of nitrogen and phosphorus generally decreased due to the lack of rainfall, runoff and transport from diffuse sources. Other analytes, including dissolved solids and pH, did not change to any considerable degree and were quite spatially variable. Although the health of benthic macroinvertebrate communities can decrease with a lower diversity and fewer sensitive taxa, effects were not significant in most rivers. Algal blooms occurred in some locations, particularly in lowland agricultural catchments with low water velocities and little shade. The prolonged lack of flushing flows can be a significant problem. Fish kills occurred where they became stranded and isolated from the main flow and where there was a lack of deeper pool refuges. Temperatures in excess of 25°C can also result in isolated fish kills, but the duration of these high temperatures appears to be the most critical factor. Adverse effects from drought can be widespread and severe in some locations, but appear to be relatively short-lived with recovery occurring rapidly with increasing flows at most locations. This indicates a degree of resilience of rivers to drought and low flows with long-term impacts that are not severe.     

Palaeochannel reconstructions from point bar deposits: a three-dimensional perspective

Quantitative determination of palaeochannel geometry and hydraulics from point bar deposits requires an understanding of the interaction between channel-bend migration, temporal and spatial variation of point bar geometry and facies, and outcrop orientation. This interaction is modelled with the aid of a computer program which predicts three-dimensional (3-D) geometry and grain size variation of point bars. Synthetic deposits are produced for the cases of down-valley bend migration and/or increase in channel-bend sinuosity. Two-dimensional (2-D) cross-sections in varying orientations across these simulated deposits display lateral-accretion bedset surface geometry, and variation in mean bedset grain size and local palaeocurrent orientation. Most cross-sections show point bar deposits thickening away from the meander-belt axis due to a lateral progression from thinner bend-exit deposits to thicker bend-apex deposits (caused by down-valley channel translation), and/or due to a progression from thinner low sinuosity deposits to thicker high sinuosity deposits caused by channel bend expansion. In association with this lateral thickening, bedset surfaces become steeper and more convex upwards while the variation in mean grain size up bedsets commonly increases. Down-valley point bar translation allows preservation only of deposits formed downstream of the band apex, and produces characteristic fining upwards sequences. Marked lateral and vertical variations in palaeocurrent directions due to varying channel orientation relative to a given cross-section are also predicted. These results indicate a need in palaeochannel reconstructions, for a more detailed examination of 3-D variations in bedset surface geometry, palaeocurrent orientation and grain size distribution within and between bedsets of laterally accreted sediment.     

The Petrology and Geochemistry of Cone-sheets from the Cuillin Igneous Complex, Isle of Skye: Evidence for Combined Assimilation and Fractional Crystallization during Lithospheric Extension

The origin and evolution of the magma(s) involved in the formationof the olivine tholeiite cone-sheets which invade the 60-MaCuillin Igneous Complex, Isle of Skye, have been investigatedusing mineral chemistry data together with whole-rock major-and trace-element and isotope (Sr and Nd) geochemistry data.The most primitive compositions identified are almost identicalto those of the basalts being erupted at the present day alongthe spreading centre in Iceland. Rare examples of lavas fromthe slightly older lava pile of west-central and north Skye,together with a large number of dykes from the axial zone ofthe Skye Main Swarm, are of similar composition and are referredto as being of the Preshal More Basalt type (spelling is accordingto current Ordnance Survey of Great Britain maps). The intra-suitecompositional variation exhibited by the cone-sheets can beexplained in terms of relatively low-pressure fractionationof the three-phase assemblage olivine+clinopyroxene+plagioclasein their cotectic proportions of 10: 35: 55. Modelling of major-and compatible trace-element data indicates that the most evolvedcomposition may be derived by 60% crystallization of the leastevolved composition. Incompatible trace-element modelling impliesgreater degrees of crystal-liquid fractionation: Y and Zr indicate64 and 68% crystallization, respectively, whereas the rare earthelements (Eu, Yb, Gd, and Ce) indicate between 71 and 75% crystallization.This decoupled behaviour of compatible and incompatible elementsis attributed to the cone-sheet magma(s) evolving in a subjacentmagma chamber, before final emplacement in the overlying crust.Sr- and Nd-isotope data indicate that the cone-sheet magma(s)assimilated upper-crustal lithologies during fractional crystallization,most likely involving amphibolite facies gneiss of the LewisianGneiss Complex. This style of simultaneous assimilation andfractional crystallization (AFC) process in the upper crustfor the Skye cone-sheet magma(s) is in direct contrast to theprocesses identified for the magmas which produced the bulkof the lava field of west-central and north Skye, where assimilationoccurred after fractionation. The cone-sheet magmas were generatedby relatively large degrees of partial melting of a depletedmantle source associated with significant lithospheric stretching.The cause of this depletion, together with the temporal relationshipsbetween the cone-sheet magmas and the dominant transitionalmagmas of the Skye lava field and sill complex, are also discussed. ^* Reprint request to B. R. Bell