In situ measurement of Re-Os isotopes in mantle sulfides by laser ablation multicollector-inductively coupled plasma mass spectrometry: analytical methods and preliminary results

A method has been developed for the in situ determination of Re-Os isotopes in single grains of sulfides in mantle-derived peridotites using a laser ablation microprobe attached to a multicollector-induced coupled plasma mass spectrometer (MC-ICPMS). High-precision Os isotope analysis by MC-ICPMS is demonstrated by the measurement of interlaboratory Os standards. Evaluation of mass bias correction procedures shows that the exponential law provides the best fit to the Os isotope data and that the ratio of the mass fractionation coefficients for Re and Os remains constant for the range of typical instrument operating conditions. This relationship enables the accurate and precise correction of the isobaric interference of ¹⁸⁷Re on ¹⁸⁷Os for ¹⁸⁷Re/¹⁸⁸Os values up to 1.6.Results are presented for single sulfide inclusions in olivine macrocryts from kimberlites in the Siberian and Slave Cratons, and sulfides enclosed in silicates and interstitial to silicates in peridotite xenoliths from the Slave Craton and Massif Central, France. Enclosed sulfides larger than 50 μm in diameter and with Os contents ≥40 ppm give ¹⁸⁷Os/¹⁸⁸Os ratios with a precision of 0.1% (2 SE), which is equivalent to N-TIMS whole-rock data. Interstitial sulfides typically have lower Os (10 to 30 ppm) and give analyses with lower precision (∼1 to 2%) but still provide valuable information on the movement of Os within the lithosphere. The sulfide inclusions in silicates preserve significantly less radiogenic Os isotopic compositions than interstitial sulfides and accordingly produce significantly older and more realistic Re-Os age information. Whole-rock Os isotope compositions reflect the proportions of different generations of enclosed and interstitial sulfides; this calls into question the significance of many published “depletion ages.”     

Direct observations of aluminosilicate weathering in the hyporheic zone of an Antarctic Dry Valley stream

This study focused on chemical weathering and bacterial ecology in the hyporheic zone of Green Creek, a McMurdo Dry Valley (Antarctica) stream. An in situ microcosm approach was used to observe dissolution features on the basal-plane surface of muscovite mica. Four mica chips were buried in December 1999 and dug up 39 d later. Atomic force microscopy (AFM) of the basal-plane surfaces revealed small, anhedral ∼10-Å-deep etch pits covering ∼4% of the surfaces, from which an approximate basal-plane dissolution rate of 8.3 × 10⁻¹⁸ mol muscovite cm⁻² s⁻¹ was calculated (on the basis of the geometric surface area) for the study period. This is an integrated initial dissolution rate on a fresh surface exposed for a relatively brief period over the austral summer and should not be compared directly to other long-term field rates. The observation of weathering features on mica agrees with previous stream- and watershed-scale studies in the Dry Valleys, which have demonstrated that weathering occurs where liquid water is present, despite the cold temperatures.AFM imaging of mica surfaces revealed biofilms including numerous small (<1 μm long), rounded, oblong bacteria. The AFM observations agreed well with X-ray photoelectron microscopy results showing increased organic C and N. Bacteriologic analysis of the hyporheic zone sediments also revealed <1-μm-long bacteria. α-Proteobacteria were observed, consistent with the oligotrophic conditions of the hyporheic zone. Nitrate-reducing bacteria were found, in agreement with a previous tracer test at Green Creek that suggested nitrate reduction occurs in the hyporheic zone. The results of this study thus provide direct evidence of dynamic geochemical and microbial processes in the hyporheic zone of a Dry Valley stream despite the extreme conditions; such processes were inferred previously from stream-scale hydrogeochemical studies.     

Oxygen fugacity and geochemical variations in the martian basalts: implications for martian basalt petrogenesis and the oxidation state of the upper mantle of Mars

The oxygen fugacity of the Dar al Gani 476 martian basalt is determined to be quartz-fayalite-magnetite (QFM) −2.3 ± 0.4 through analysis of olivine, low-Ca pyroxene, and Cr-spinel and is in good agreement with revised results from Fe-Ti oxides that yield QFM −2.5 ± 0.7. This estimate falls within the range of oxygen fugacity for the other martian basalts, QFM −3 to QFM −1. Oxygen fugacity in martian basalts correlates with ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, and La/Yb ratios, indicating that the mantle source of the basalts is reduced and that assimilation of crust-like material controls the oxygen fugacity. This allows constraints to be placed on the oxidation state of the martian mantle and on the nature of assimilated crustal material. The assimilated material may be the product of early and extensive hydrothermal alteration of the martian crust, or it may be amphibole- or phlogopite-bearing basaltic rock within the crust. In either case, water may play a significant role in the oxidation of basaltic magmas on Mars, although it may be secondary to assimilation of ferric iron-rich material.     

Comparative Re-Os systematics of chondrites: Implications regarding early solar system processes

A suite of 47 carbonaceous, enstatite, and ordinary chondrites are examined for Re-Os isotopic systematics. There are significant differences in the ¹⁸⁷Re/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os ratios of carbonaceous chondrites compared with ordinary and enstatite chondrites. The average ¹⁸⁷Re/¹⁸⁸Os for carbonaceous chondrites is 0.392 ± 0.015 (excluding the CK chondrite, Karoonda), compared with 0.422 ± 0.025 and 0.421 ± 0.013 for ordinary and enstatite chondrites (1σ standard deviations). These ratios, recast into elemental Re/Os ratios, are as follows: 0.0814 ± 0.0031, 0.0876 ± 0.0052 and 0.0874 ± 0.0027, respectively. Correspondingly, the ¹⁸⁷Os/¹⁸⁸Os ratios of carbonaceous chondrites average 0.1262 ± 0.0006 (excluding Karoonda), and ordinary and enstatite chondrites average 0.1283 ± 0.0017 and 0.1281 ± 0.0004, respectively (1σ standard deviations). The new results indicate that the Re/Os ratios of meteorites within each group are, in general, quite uniform. The minimal overlap between the isotopic compositions of ordinary and enstatite chondrites vs. carbonaceous chondrites indicates long-term differences in Re/Os for these materials, most likely reflecting chemical fractionation early in solar system history.A majority of the chondrites do not plot within analytical uncertainties of a 4.56-Ga reference isochron. Most of the deviations from the isochron are consistent with minor, relatively recent redistribution of Re and/or Os on a scale of millimeters to centimeters. Some instances of the redistribution may be attributed to terrestrial weathering; others are most likely the result of aqueous alteration or shock events on the parent body within the past 2 Ga.The ¹⁸⁷Os/¹⁸⁸Os ratio of Earth’s primitive upper mantle has been estimated to be 0.1296 ± 8. If this composition was set via addition of a late veneer of planetesimals after core formation, the composition suggests the veneer was dominated by materials that had Re/Os ratios most similar to ordinary and enstatite chondrites.     

Physical and chemical properties of the waters of saline lakes and their importance for deep-water renewal: Lake Issyk-Kul, Kyrgyzstan

The relationships between electrical conductivity, temperature, salinity, and density are studied for brackish Lake Issyk-Kul. These studies are based on a newly determined major ion composition, which for the open lake shows a mean absolute salinity of 6.06 g kg⁻¹. The conductivity-temperature relationship of the lake water was determined experimentally showing that the lake water is about 1.25 times less conductive than seawater diluted to the same absolute salinity as that of the lake water. Based on these results, an algorithm is presented to calculate salinity from in-situ conductivity measurements. Applied to the field data, this shows small but important vertical salinity variations in the lake with a salinity maximum at 200 m and a freshening of the surface water with increasing proximity to the shores. The algorithm we adopt to calculate density agrees well with earlier measurements and shows that at 20°C and 1 atm Lake Issyk-Kul water is about 530 g m⁻³ denser than seawater at the same salinity. The temperature of maximum density at 1 atm is about 0.15°C lower than that for seawater diluted to the same salinity. Despite its small variations, salinity plays an important role, together with temperature changes, in the static stability and in the production of deep-water in this lake. Changes in salinity may have had important consequences on the mixing regime and the fate of inflowing river water over geological time. Uncharged silicic acid is negligible for the stability of the water column except near an ∼15 m thick nepheloid layer observed at the bottom of the deep basin.     

A Comparison of Two-Phase Dynamic Upscaling Methods Based on Fluid Potentials

Although a number of methods for calculating dynamic pseudo-functions have been developed over the years, there is still a lack of understanding as to why a certain method will succeed in some cases but fail in others. In this paper, we describe the results of an assessment of several upscaling methods, namely the Kyte and Berry (KB) method, the Stone method, the Hewett and Archer (HA) method and the Transmissibility-Weighted (TW) method. We have analyzed the equations for deriving the methods and investigated the results of numerical simulations of gas displacing oil, in a variety of models to enable us to gain new insights into these, and related, upscaling methods. In particular, some novel observations on methods based on fluid potential are presented and the issue of using predicted fluid mobilities as a criterion of accuracy of an upscaling method is clarified.     

Structural relaxation in the MnCO3–CaCO3 solid solution: a Mn K-edge EXAFS study

Mn K-edge EXAFS spectroscopy of solid-solution samples encompassing the complete MnCO₃–CaCO₃ series shows that first-shell Mn–O distances deviate little from the 2.19-Å distance observed in pure MnCO₃. Very slight lengthening is observed only in the limiting case of dilute Mn(II) calcite solid solutions, where the Mn–O distance is 2.21 Å. The observed nearly complete structural relaxation and the composition independence of the Mn–O distance are consistent with the Pauling model behavior of solid solutions, and agree with previous studies showing a high degree of relaxation around hetero-sized substituents in the calcite structure. Strain occurs through bond bending, which is facilitated by the exclusively corner-sharing topology of calcite. Observed distances from Mn to more distant neighbors show significant variation across the solid-solution series that resembles Vegard's law-type behavior but reflects averaging. The high degree of relaxation suggests modest enthalpies of mixing in the solution, consistent with calorimetric studies.