Integration of stress testing with graph theory to assess the resilience of urban road networks under seismic hazards

Transportation networks daily provide accessibility and crucial services to societies. However, they must also maintain an acceptable level of service to critical infrastructures in the case of disruptions, especially during natural disasters. We have developed a method for assessing the resilience of transportation network topology when exposed to environmental hazards. This approach integrates graph theory with stress testing methodology and involves five basic steps: (1) establishment of a scenario set that covers a range of seismic damage potential in the network, (2) assessment of resilience using various graph-based metrics, (3) topology-based simulations, (4) evaluation of changes in graph-based metrics, and (5) examination of resilience in terms of spatial distribution of critical nodes and the entire network topology. Our case study was from the city of Kathmandu in Nepal, where the earthquake on April 25, 2015, followed by a major aftershock on May 12, 2015, led to numerous casualties and caused significant damage. Therefore, it is a good example for demonstrating and validating the developed methodology. The results presented here indicate that the proposed approach is quite efficient and accurate in assisting stakeholders when evaluating the resilience of transportation networks based on their topology.     

Interpretation of Gravity Anomalies with the Normalized Full Gradient (NFG) Method and an Example

The Normalized Full Gradient (NFG) method which was put forward about 50 years ago has been used for downward continuation of gravity potential data, especially in the former Union of Soviet Socialist Republics. This method nullifies perturbations due to the passage of mass depth during downward continuation. The method depends on the downwards analytical continuation of normalized full gradient values of gravity data. Analytical continuation discriminates certain structural anomalies which cannot be distinguished in the observed gravity field. This method has been used in various petroleum and tectonic studies. The Trapeze method was used for the determination of Fourier coefficients during the application of this method. No other techniques for calculating these coefficients have been used. However, the Filon method was used for the determination of Fourier coefficients during the application of the NFG method in this work. This method, rather than the Trapeze method, should be preferred for indicating abnormal mass resources at the lower harmonics. In this study, the NFG method using the Filon method has been applied the first time to theoretical models of gravity profiles as example field at the Hasankale-Horasan petroleum exploration province where successful results were achieved. Hydrocarbon presence was shown on the NFG sections by the application of NFG downward continuation operations on theoretical models. Important signs of hydrocarbon structure on the NFG section for field and model data at low harmonics are obtained more effectively using this method.     

Residual strength of slip zones of large landslides in the Three Gorges area, China

Slip zones of the large landslides in the Three Gorges area are commonly composed of fine-grained soils with substantial amount of coarse-grained particles, particularly gravel-sized particles. In this study, residual strength of the soils from slip zones of these landslides were examined in relation to their index properties based on a survey of 170 landslides. It was found that laboratory-determined residual friction angle using gravel-free fraction of the disturbed soils from the slip zones was closely related to clay content, liquid limit and plasticity index. On the other hand, in-situ residual friction angle of these soils (i.e. including gravel fraction) showed very weak correlations with clay content and Atterberg limits, but was largely dependent on gravel and fines (clays + silts) contents, increasing with gravels and decreasing with fines, and displayed strong linear correlation with the ratio of gravel to fines contents. These observations indicate that among the index properties, clay content and Atterberg limits can be used to estimate residual strength of the soils finer than 2 mm, but they are not appropriate evaluate the residual strength of the soils containing considerable amount of gravel-sized particles. For the latter, particle size distribution (particularly the ratio of gravel to fines contents) appears to be a useful index. Additionally, it was found that there was no identifiable correlation between relative abundance of individual major clay minerals and residual friction angles of both gravel-free fraction of disturbed and in-situ soils, suggesting that influence of clay minerals on residual strength of these soils can not be simply evaluated based on their abundance.     

Relative contributions of crust and mantle to generation of Campanian high-K calc-alkaline I-type granitoids in a subduction setting, with special reference to the Harşit Pluton, Eastern Turkey

We present elemental and Sr–Nd–Pb isotopic data for the magmatic suite (~79 Ma) of the Harşit pluton, from the Eastern Pontides (NE Turkey), with the aim of determining its magma source and geodynamic evolution. The pluton comprises granite, granodiorite, tonalite and minor diorite (SiO₂ = 59.43–76.95 wt%), with only minor gabbroic diorite mafic microgranular enclaves in composition (SiO₂ = 54.95–56.32 wt%), and exhibits low Mg# (<46). All samples show a high-K calc-alkaline differentiation trend and I-type features. The chondrite-normalized REE patterns are fractionated [(La/Yb) _n  = 2.40–12.44] and display weak Eu anomalies (Eu/Eu* = 0.30–0.76). The rocks are characterized by enrichment of LILE and depletion of HFSE. The Harşit host rocks have weak concave-upward REE patterns, suggesting that amphibole and garnet played a significant role in their generation during magma segregation. The host rocks and their enclaves are isotopically indistinguishable. Sr–Nd isotopic data for all of the samples display I _Sr = 0.70676–0.70708, ε _Nd(79 Ma) = −4.4 to −3.3, with T _DM = 1.09–1.36 Ga. The lead isotopic ratios are (²⁰⁶Pb/²⁰⁴Pb) = 18.79–18.87, (²⁰⁷Pb/²⁰⁴Pb) = 15.59–15.61 and (²⁰⁸Pb/²⁰⁴Pb) = 38.71–38.83. These geochemical data rule out pure crustal-derived magma genesis in a post-collision extensional stage and suggest mixed-origin magma generation in a subduction setting. The melting that generated these high-K granitoidic rocks may have resulted from the upper Cretaceous subduction of the Izmir–Ankara–Erzincan oceanic slab beneath the Eurasian block in the region. The back-arc extensional events would have caused melting of the enriched subcontinental lithospheric mantle and formed mafic magma. The underplating of the lower crust by mafic magmas would have played a significant role in the generation of high-K magma. Thus, a thermal anomaly induced by underplated basic magma into a hot crust would have caused partial melting in the lower part of the crust. In this scenario, the lithospheric mantle-derived basaltic melt first mixed with granitic magma of crustal origin at depth. Then, the melts, which subsequently underwent a fractional crystallization and crustal assimilation processes, could ascend to shallower crustal levels to generate a variety of rock types ranging from diorite to granite. Sr–Nd isotope modeling shows that the generation of these magmas involved ~65–75% of the lower crustal-derived melt and ~25–35% of subcontinental lithospheric mantle. Further, geochemical data and the Ar–Ar plateau age on hornblende, combined with regional studies, imply that the Harşit pluton formed in a subduction setting and that the back-arc extensional period started by least ~79 Ma in the Eastern Pontides.     

Effects of sinuosity factor on hydrodynamic parameters estimation in karst systems: a dye tracer experiment from the Beyyayla sinkhole (Eskişehir,Turkey)

The sinuosity factor (SF) is a critical value in karst systems in terms of estimating their hydrodynamic parameters including groundwater velocity, coefficient of dispersion, etc., through dye tracer experiments. SF has been used in a number of different dye tracer experiments in karstic systems to estimate a representative flow path. While knowing SF is crucially important in the estimation of hydrodynamic parameters, its calculation is associated with significant uncertainty due to the complexity of subsurface karstic features. And yet, only a few studies have discussed its uncertainties, which might lead some errors in estimation of hydrodynamic parameters from dye tracer experiment. In this study, dye tracer experiments were conducted in two consecutive years (2003 and 2004) representing low and high flow conditions in the Beyyayla sinkhole (Eski?ehir, Turkey) where the flow path is well known. Uranine was used in experiments as a tracer and QTRACER computer program was used to determine the hydrodynamic properties of the Beyyayla karst system as well as to gain insights into the effects of SF from dye tracer experiments on estimated parameters. The results showed that the breakthrough curve follows a unimodal and a bimodal distribution in low and high flow conditions, respectively. These different distributions stem from the water transport mechanisms, where velocities were calculated as 58.2 and 93.6 m h^?1 during low and high flow conditions observed in a spring emerging from the south side of the studied system. The results also show that the coefficient of dispersion, Reynolds number, and Peclet number increased and longitudinal dispersivity decreased with the higher flow rate. Furthermore, the estimated parameters did not vary with either the flow conditions or the tracer transit time, but they have shown some variations with SF. When SF was increased by 50 %, a change in these parameters was obtained in the range of 50–125 %.     

Ecosystem history of Mississippi River-influenced continental shelf revealed through preserved phytoplankton pigments

Pigments determined by high performance liquid chromatography (HPLC) provide useful information concerning water column and epibenthic plant and microbial communities in both extant communities and accumulated sediments in lakes, estuaries and the ocean. Chlorophyll and its degradation products provide an estimate of overall biomass, and carotenoid pigments provide taxonomic biomarkers of phytoplankton. We examined the pigments preserved in sediment cores from the Louisiana continental shelf adjacent to the outflow of the Mississippi River system to document changes in phytoplankton community composition, phytoplankton abundance, and conditions of hypoxia over time. Carbon accumulated in sediments from water depths of 20-60 m is primarily derived from marine phytoplankton and represents the history of phytoplankton communities in the overlying water. There is a general increase in chlorophyll a, pheopigments, zeaxanthin, fucoxanthin and most carotenoids over time, with the change gradual from 1955 to 1970, followed by a fairly steady increase to 1997. The highest chloropigment concentrations are in cores from areas more likely to be exposed to seasonal hypoxia. These indicate an increase in eutrophication in the form of greater diatom and cyanobacterial production, or a worsening of hypoxia, or both. This trend expanded westward along the Louisiana shelf in the 1990s.     

Wave Slamming on An OWSC Wave Energy Converter in Coupled Wave-Current Conditions with Variable-Depth Seabed

China Ocean Engineering - Coastal wave energy resources have enormous exploitation potential due to shorter weather window, closer installation distance and lower maintenance cost. However, impact...     

Space-time kriging of precipitation variability in Turkey for the period 1976–2010

The purpose of this study is to revaluate the changing spatial and temporal trends of precipitation in Turkey. Turkey is located in one of the regions at greatest risk from the potential effects of climate change. Since the 1970s, a decreasing trend in annual precipitation has been observed, in addition to an increasing number of precipitation-related natural hazards such as floods, extreme precipitation, and droughts. An understanding of the temporal and spatial characteristics of precipitation is therefore crucial to hazard management as well as planning and managing water resources, which depend heavily on precipitation. The ordinary kriging method was employed to interpolate precipitation estimates using precipitation records from 228 meteorological stations across the country for the period 1976–2010. A decreasing trend was observed across the Central Anatolian region, except for 1996–2000 which saw an increase in precipitation. However, this same period is identified as the driest year in Eastern and South Eastern Anatolia. The Eastern Black Sea region has the highest precipitation in the country; after 1996, an increase in annual precipitation in this region is observed. An overall reduction is also seen in southwest Turkey, with less variation in precipitation.

     

Analytical solutions of the diffraction problem of a group of truncated vertical cylinders

An exact analytical method is described to solve the diffraction problem of a group of truncated vertical cylinders. In order to account for the interaction between the cylinders, Kagemoto and Yue's exact algebraic method is utilised. The isolated cylinder diffraction potential due to incident waves is obtained using Garret's solution and evanescent mode solutions are derived in a similar manner.Numerical results are presented for arrays of two and four cylinders. Comparisons between the results obtained from the method presented here and those obtained from numerical methods show excellent agreement.     

HNC-Plot: an excel VBA for visualization of helium,nitrogen and CO<Subscript>2</Subscript> isotope data of crustal and mantle gases

We present HNC-Plot, an Excel Visual Basic Application (Excel VBA) that can easily be used to create graphical plots of fluids associated with volcanic gases or geothermal manifestations, based on their helium, nitrogen and CO₂ isotope data. HNC-Plot has been designed in a simple way; all the user has to do is to input data in an Excel spreadsheet. The spreadsheet also contains buttons which have links to Excel VBA codes that generate plots. Once, the respective button is clicked, and all required variables are defined, Excel VBA generates a plot with labels and axes. Based upon the user preferences, additional tasks such as construction of mixing lines between mantle and crustal gases or calculation of end-member proportions can also be performed. We sincerely believe geoscientists can quickly and easily create these plots, free of charge, with this application. This study also presents previously published data from related literature to show the foundations of the application and to present sample plots created with it.