Rockfall Hazard Analysis From Discrete Fracture Network Modelling with Finite Persistence Discontinuities

Developing an accurate representation of the rock mass fabric is a key element in rock fall hazard analysis. The orientation, persistence and density of fractures control the volume and shape of unstable blocks or compartments. In this study, the discrete fracture modelling technique and digital photogrammetry were used to accurately depict the fabric. A volume distribution of unstable blocks was derived combining polyhedral modelling and kinematic analyses. For each block size, probabilities of failure and probabilities of propagation were calculated. A complete energy distribution was obtained by considering, for each block size, its occurrence in the rock mass, its probability of falling, its probability to reach a given location, and the resulting distribution of energies at each location. This distribution was then used with an energy–frequency diagram to assess the hazard.     

Paleomagnetism of the Cambro-Ordovician McClure Mountain alkalic complex,Colorado

The Middle to Late Cambrian loop in the North American apparent polar wander path (APWP) has been variously attributed to tectonic rotations, remagnetizations and primary magnetizations. Although no primary thermal remanent magnetizations or primary detrital remanent magnetizations have as yet been demonstrated, the temporally self-consistent nature of the loop has been used as an argument for primary magnetizations. We have studied535 ± 5Ma nepheline syenites and syenites of the McClure Mountain alkalic complex, as well as495 ± 10Ma red trachyte dikes which intruded the complex, in an effort to find a primary TRM. Because Zijderveld analysis yielded consistent results for only one trachyte dike, remagnetization great-circle analysis was employed, giving a pole for the trachyte dikes at the tip of the loop (43°N, 114°E), while the syenites and nepheline synenites gave a pole at the base of the loop (18°N, 142°E). The magnetic carrier in the trachytes is hematite which apparently formed during a pervasive hydrothermal alteration. KAr whole rock dating of the trachytes suggests a Pennsylvanian age for the alteration, and thus a late Paleozoic remagnetization of the trachytes. Thus, the low-latitude Cambrian pole is confirmed, but we find no evidence in this study to support the primary nature of the Cambrian APWP.     

Resolving mechanisms of toxicity while pursuing ecotoxicological relevance?

In this age of modern biology, aquatic toxicological research has pursued mechanisms of action of toxicants. This has provided potential tools for ecotoxicologic investigations. However, problems of biocomplexity and issues at higher levels of biological organization remain a challenge. In the 1980s and 1990s and continuing to a lesser extent today, organisms residing in highly contaminated field sites or exposed in the laboratory to calibrated concentrations of individual compounds were carefully analyzed for their responses to priority pollutants. Correlation of biochemical and structural analyses in cultured cells and tissues, as well as the in vivo exposures led to the production and application of biomarkers of exposure and effect and to our awareness of genotoxicity and its chronic manifestations, such as neoplasms, in wild fishes. To gain acceptance of these findings in the greater environmental toxicology community, “validation of the model” versus other, better-established often rodent models, was necessary and became a major focus. Resultant biomarkers were applied to heavily contaminated and reference field sites as part of effects assessment and with investigations following large-scale disasters such as oil spills or industrial accidents.

Over the past 15 years, in the laboratory, small aquarium fish models such as medaka (Oryzias latipes), zebrafish (Danio rerio), platyfish (Xiphophorus species), fathead minnow (Pimephales promelas), and sheepshead minnow (Cyprinodon variegatus) were increasingly used establishing mechanisms of toxicants. Today, the same organisms provide reliable information at higher levels of biological organization relevant to ecotoxicology. We review studies resolving mechanisms of toxicity and discuss ways to address biocomplexity, mixtures of contaminants, and the need to relate individual level responses to populations and communities.     

Applying essentially non‐oscillatory interpolation to controlled‐source electromagnetic modelling*

Modelling and inversion of controlled‐source electromagnetic (CSEM) fields requires accurate interpolation of modelled results near strong resistivity contrasts. There, simple linear interpolation may produce large errors, whereas higher‐order interpolation may lead to oscillatory behaviour in the interpolated result. We propose to use the essentially non‐oscillatory, piecewise polynomial interpolation scheme designed for piecewise smooth functions that contains discontinuities in the function itself or in its first or higher derivatives. The scheme uses a non‐linear adaptive algorithm to select a set of interpolation points that represent the smoothest part of the function among the sets of neighbouring points. We present numerical examples to demonstrate the usefulness of the scheme. The first example shows that the essentially non‐oscillatory interpolation (ENO) scheme better captures an isolated discontinuity. In the second example, we consider the case of sampling the electric field computed by a finite‐volume CSEM code at a receiver location. In this example, the ENO interpolation performs quite well. However, the overall error is dominated by the discretization error. The other examples consider the comparison between sampling with essentially non‐oscillatory interpolation and existing interpolation schemes. In these examples, essentially non‐oscillatory interpolation provides more accurate results than standard interpolation, especially near discontinuities.     

The biogeochemical sulfur cycle in the marine boundary layer over the Northeast Pacific Ocean

The major components of the marine boundary layer biogeochemical sulfur cycle were measured simultaneously onshore and off the coast of Washington State, U.S.A. during May 1987. Seawater dimethylsulfide (DMS) concentrations on the continental shelf were strongly influenced by coastal upwelling. Concentration further offshore were typical of summer values (2.2 nmol/L) at this latitude. Although seawater DMS concentrations were high on the biologically productive continental shelf (2–12 nmol/L), this region had no measurable effect on atmospheric DMS concentrations. Atmospheric DMS concentrations (0.1–12 nmol/m³), however, were extremely dependent upon wind speed and boundary layer height. Although there appeared to be an appreciable input of non-sea-salt sulfate to the marine boundary layer from the free troposphere, the local flux of DMS from the ocean to the atmosphere was sufficient to balance the remainder of the sulfur budget.     

Nutrient pore water chemistry,Great Bay,New Hampshire: Benthic fluxes

Benthic fluxes of C, N, P and Si have been measured at two sites in Great Bay Estuary, New Hampshire. Higher fluxes of reactive phosphate, nitrate and reactive silicate were observed at the site where bioturbation is known to occur and the fluxes of NH₄ ⁺, PO₄ ^?3 and reactive silicate at this location were from 3 to 6 times higher than that calculated by simple pore water diffusion models. *** DIRECT SUPPORT *** A01BY019 00010     

Slump debris flows in the Akovolwo Mountains area of Benue State,Nigeria

In September 1979, rain-induced complex landslides occurred in two separate localities along the slopes of the Akovolwo Mountains near Jato-Aka in the Kwande Local Government area of Benue State, Nigeria.The two movements developed on bedrock slopes covered by a veneer of colluvium and (or) residuum no more than 1.5 to 2m deep. Each started as a slump and graduated into a debris flow. The slump, extending downhill a short distance away from the head scarp, had been reconstituted into a debris flow as the initial movement (sliding movement) of the soil mass caused remoulding of the saturated moving mass into viscous debris-laden mud. The resulting mass moved partly along a pre-existing mountain stream channel and partly along a fresh channel it cleared in the savanna forest. At the break of slope, the mass of boulders was dumped and a trail of smaller fragments littered the channels towards the Katsina-Ala River.     

Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.