Isolation basin stratigraphy and Holocene relative sea-level change on Arveprinsen Ejland,Disko Bugt,West Greenland

This paper presents the results of an investigation into Holocene relative sea-level (RSL) change, isostatic rebound and ice sheet dynamics in Disko Bugt, West Greenland. Data collected from nine isolation basins on Arveprinsen Ejland, east Disko Bugt, show that mean sea level fell continuously from ca. 70 m at 9.9 ka cal. yr BP (8.9 ka ¹⁴C yr BP) to reach a minimum of ca. −5 m at 2.8 ka cal. yr BP (2.5 ka ¹⁴C yr BP), before rising to the present day. A west–east gradient in isostatic uplift across Disko Bugt is confirmed, with reduced rebound observed in east Disko Bugt. However, RSL differences (up to 20 m at 7.8 ka to 6.8 ka cal. yr BP (7 ka to 6 ka ¹⁴C yr BP)) also exist within east Disko Bugt, suggesting a significant north–south component to the area’s isostatic history. The observed magnitude and timing of late Holocene RSL rise is not compatible with regional forebulge collapse. Instead, RSL rise began first in the eastern part of the bay, as might be expected under a scenario of crustal subsidence caused by neoglacial ice sheet readvance. The results of this study demonstrate the potential of isolation basin data for local and regional RSL studies in Greenland, and the importance of avoiding data compilations from areas where the isobase orientation is uncertain. Copyright © 1999 John Wiley & Sons, Ltd.     

Alluvial records of medieval and prehistoric tin mining on Dartmoor,southwest England

The role of tin mining in the society of prehistoric Dartmoor and its impact on the local landscape have long been discussed despite equivocal evidence for prehistoric mine sites. A fluvial geomorphological approach, using floodplain stratigraphy, combined with sediment geochemistry and mineralogy, was employed to identify prehistoric tin mining at the catchment scale. Waste sediment, released during hydraulic mining of alluvial tin deposits, caused downstream floodplain aggradation of sands with a diagnostic signature of elevated Sn concentration within the silt fraction. At a palaeochannel site in the Erme Valley, sediment aggradation buried datable peat deposits. A period of aggradation postdating cal. A.D. 1288–1389 is consistent with the 13th century peak in tin production identified in the documentary record. An earlier phase of aggradation, however, occurred between the 4th and 7th centuries A.D., providing evidence of late Roman or early Post Roman tin mining activity on Dartmoor. © 2004 Wiley Periodicals, Inc.     

Electrochemical Degradation of Remazol Black B Dye Effluent

This study focused on the electrochemical degradation of hydrolyzed Remazol Black B (CI Reactive Black 5), a common diazo reactive dye, in aqueous solution. In the presence of various auxiliary dye chemicals, a typical Remazol Black simulated exhausted dyebath liquor was treated electrochemically in various basic electrochemical reactor configurations such as batch, batch recirculation and single pass systems. The effect of current density, supporting electrolyte concentration, electrolysis duration, specific electrode surface and fluid flow rate on pollutant removal and energy consumption performance of the systems was critically evaluated. Batch studies show the following operating parameters, current density: 2.5 A/dm², electrolysis duration: 6 h, and supporting electrolyte concentration: 3 g/L, were optimal for good overall performance of the system. Color removal was complete by 3 h of treatment for all combinations of parameters studied. The pollutant removal performance of the batch recirculation system was found to have improved considerably by increasing the flow rate. Performance of the batch recirculation system was comparatively better than the other rector configurations studied, with respect to capacity utilization and energy consumption.     

A buffered impact damper for multi‐degree‐of‐freedom structural control

The results of an experimental investigation into the use of a buffered impact damper for controlling the dynamic response of an MDOF (multi‐degree‐of‐freedom) structure are presented in this paper. Free and forced vibration tests of a three‐DOF test structure equipped with a buffered impact damper are performed to evaluate the resulting damping effect and impact characteristics. The effect of damper parameters, such as clearance, and excitation type on the performance of the impact damper is also investigated. The performance of the buffered impact damper is compared with that of an equivalent conventional rigid impact damper. It is found that the buffered impact damper not only significantly reduces the peak contact force and the associated accelerations and noise generated by collisions but can also substantially enhance the damping effect over a wide range of frequencies, encompassing the natural frequencies of the test structure. Copyright © 2008 John Wiley & Sons, Ltd.     

Lateglacial and Holocene relative sea‐level changes and first evidence for the Storegga tsunami in Sutherland,Scotland

We reconstruct one of the longest relative sea‐level (RSL) records in north‐west Europe from the north coast of mainland Scotland, using data collected from three sites in Loch Eriboll (Sutherland) that we combine with other studies from the region. Following deglaciation, RSL fell from a Lateglacial highstand of +6?8 m OD (Ordnance Datum = ca. mean sea level) at ca. 15 k cal a BP to below present, then rose to an early Holocene highstand and remained at ca. +1 m OD between ca. 7 and 3 k cal a BP, before falling to present. We find no evidence for significant differential Holocene glacio‐isostatic adjustment between sites on the north‐west (Lochinver, Loch Laxford), north (Loch Eriboll) and north‐east (Wick) coast of mainland Scotland. This suggests that the region was rapidly deglaciated and there was little difference in ice loads across the region. From one site at the head of Loch Eriboll we report the most westerly sedimentary evidence for the early Holocene Storegga tsunami on the Scottish mainland. The presence of the Storegga tsunami in Loch Eriboll is predicted by a tsunami wave model, which suggests that the tsunami impacted the entire north coast of Scotland and probably also the Atlantic coastline of north‐west Scotland.

     

Lunar dust and lunar simulant activation and monitoring

Abstract— NASA plans to resume human exploration of the Moon in the next decade. One of the pressing concerns is the effect that lunar dust (the fraction of the lunar regolith <20 μm in diameter) will have on systems, both human and mechanical, due to the fact that various problems were caused by dust during the Apollo missions. The loss of vacuum integrity in the lunar sample containers during the Apollo era ensured that the present lunar samples are not in the same condition as they were on the Moon; they have been passivated by oxygen and water vapor. To mitigate the harmful effects of lunar dust on humans, methods of “reactivating” the dust must be developed for experimentation, and, ideally, it should be possible to monitor the level of activity to determine methods of deactivating the dust in future lunar habitats. Here we present results demonstrating that simple grinding, as a simple analog to micrometeorite crushing, is apable of substantially activating lunar dust and lunar simulant, and it is possible to determine the level of chemical activity by monitoring the ability of the dust to produce hydroxyl radicals in aqueous solution. Comparisons between ground samples of lunar dust, lunar simulant, and quartz reveal that ground lunar dust is capable of producing over three times the amount of hydroxyl radicals as lunar simulant and an order of magnitude more than ground quartz.     

A new method for spatial centrographic analysis of mineral deposit clusters

A centrographic method for analysing mineral deposit clusters is illustrated using the komatiite-hosted Kambalda nickel sulphide deposit cluster, Yilgarn craton, Western Australia. In this method, the standard distance circle divides the cluster into a more endowed inner part and a less endowed peripheral part. The standard deviational ellipse, another centrographic object, depicts the preferred northwest–southeast trend of nickel orebodies at Kambalda. Weighted centrography shows that nickel endowment is greater in the eastern than western part of the cluster. The spatio-geometric interaction of the circle and ellipse splits the cluster into several partitions. The relative concentration of nickel orebodies or endowment within a partition in relation to their concentration within the entire cluster is termed ‘capture efficiency’. Komatiite areal trace exhibits higher nickel orebody capture efficiency than spatio-geometric partitions; however, some spatio-geometric partitions exhibit nickel endowment capture efficiencies comparable to that of komatiite. Furthermore, nickel orebody and endowment capture efficiencies of komatiite are elevated only within the standard distance circle. These results suggest that at Kambalda, (i) the standard distance circle is a prime window for understanding the komatiite-hosted nickel system, and (ii) spatio-geometric partitions are plausible locales for spatial analysis of nickel orebodies and endowment. The proposed centrographic method is potentially useful in mineral resource estimations and mineral exploration targeting.     

Assessment of undiscovered nickel sulphide resources,Kalgoorlie Terrane,Western Australia: Part 1. Deposit and endowment density models

The use of mineral deposit density regression models to estimate the number of undiscovered deposits is gaining acceptance in mineral resources assessments. The deposit density regression models currently in use are based on well-established power law relationships between deposit density (deposits/km²) and the areal extent of the host rocks in well explored regions (control areas) worldwide. Although these generalized or global deposit density models can generate guideline estimates that are useful at the terrane scale, locally-derived terrane-based deposit density regression models may potentially yield more relevant estimates at the terrane scale. Using 12 selected komatiite-defined control areas in the Kalgoorlie Terrane, Western Australia, we found that the size (km²) of the control areas had power law relationships with (i) nickel sulphide deposit density, and (ii) nickel endowment density (nickel metal/km²). Regression analyses showed that both power law relationships are statistically significant at the 5% level. This suggests that nickel sulphide deposit and endowment density models could be used to estimate the number of undiscovered nickel sulphide deposits and amount of nickel metal endowment in less explored komatiites in the Kalgoorlie Terrane. This study shows that global geological relationships can be viably downscaled onto local geological terranes thereby supporting the hypothesis that the processes of mineral deposit formation and preservation are scale-independent and self-similar.     

Palaeoecological,archaeological and historical data and the making of Devon landscapes. I. The Blackdown Hills

This paper presents the first systematic study of the vegetation history of a range of low hills in SW England, UK, lying between more researched fenlands and uplands. After the palaeoecological sites were located bespoke archaeological, historical and documentary studies of the surrounding landscape were undertaken specifically to inform palynological interpretation at each site. The region has a distinctive archaeology with late Mesolithic tool scatters, some evidence of early Neolithic agriculture, many Bronze Age funerary monuments and Romano‐British iron‐working. Historical studies have suggested that the present landscape pattern is largely early Medieval. However, the pollen evidence suggests a significantly different Holocene vegetation history in comparison with other areas in lowland England, with evidence of incomplete forest clearance in later‐Prehistory (Bronze?Iron Age). Woodland persistence on steep, but poorly drained, slopes, was probably due to the unsuitability of these areas for mixed farming. Instead they may have been under woodland management (e.g. coppicing) associated with the iron‐working industry. Data from two of the sites also suggest that later Iron Age and Romano‐British impact may have been geographically restricted. The documented Medieval land management that maintained the patchwork of small fields, woods and heathlands had its origins in later Prehistory, but there is also evidence of landscape change in the 6th–9th centuries AD. We conclude that the Blackdown Hills area was one of many ‘distinctive subregions’, which due to a combination of edaphic, topographic and cultural factors could qualify as an eco‐cultural region or ‘pays’. It is argued that the use of such eco‐culturally distinctive regions or pays can provide a spatial and archaeological framework for palaeoecology, which has implications for landscape research, designation and heritage management.