Experimental studies of sodic microperthites from the Loch Ailsh syenite

Solvus curves under both ‘dry’ and ‘hydrothermal’ (P_H2O = 1 kbar) conditions have been determined for two microperthitic alkali feldspar starting materials from the Loch Ailsh syenite complex, Assynt, Scotland. One sample (Ab₇₄ Or₂₄ An₂) possessed a K-phase showing dominant monoclinic symmetry to both powder and single-crystal X-ray methods, the other (Ab₈₈Or₃₀An₂) had maximum microcline as K-phase. These materials gave essentially identical solvi for both types of experiment, interpreted as indicating similar degrees of local order in the K-phase, but with differing domain size, leading to the different X-ray properties. The ‘dry’ solvus curves confirm the determination of the microcline-low albite solvus of Bachinski & Müller. The hydrothermal curves are used to estimate P_H1O <3.5 kbars, T > 755 °C for emplacement of the Loch Ailsh syenites.     

On the chemical composition of atmospheric aerosols — Part II: Trends between some chemical components of rainwater and physical variables over the United States

Summary Annual average results of rainwater analysis, carried out byC. Junge at about 60 stations of the United States sampling network are used in an attempt to correlate the ionic species present in rain, as a general contribution to atmospheric chemicstry. Correlation with physical parameters is attempted at the same time in some cases, and the resulting trends discussed. The results obtained are presented in the general form of linear and planar correlation, and linear regression coefficients.     

Finite strip analysis of the dynamic response of beam and slab highway bridges

This paper presents a method of analysis for the dynamic response of a simply supported beam and slab bridge under the action of a moving vehicle. The bridge is idealized as an orthotropic plate and, in the analysis, is subdivided into a number of finite strips. The vehicle is idealized as a moving sprung mass. Viscous damping is taken into account for both bridge and vehicle. The results show that there is significant variation of response across transverse sections of the bridge. Furthermore the dynamic magnification is considerably greater than that predicted by a more approximate method in which the bridge is idealized as a simple prismatic beam.     

Nitrous oxide emission from Gulf Coast wetlands

Nitrous oxide evolution may contribute to partial destruction of the ozone layer in the stratosphere. A two year study of the release of N₂O from adjoining salt, brackish, and fresh marsh sediment indicates that the annual emission was 31, 48, and 55 mg N m^?2 respectively. Emission from open water area was less than the corresponding emission from the marsh sediment. In vitro experiments indicate that the N₂O emission was increased when the sediment was drained for extended periods of time. The addition of NO₃^? significantly increased the rate of N₂O evolution, indicating that a large potential for denitrification exists in the anoxic sediment. Appreciable losses of N₂O would only be expected when the marshes receive an extraneous source of nitrate such as sewage and/or wastewater.The contribution of the Gulf Coast wetlands to the atmospheric N₂O balance is estimated to be 3.3 × 10⁹ g N₂O. The maximum average daily emission was equivalent to 1.5 g N₂O-N ha^?1, which is less than the measured emission from uncultivated soils (Mosieret al., 1981) but greater than the estimates from noncropped land (CAST, 1976).     

Sterane distribution of solid bitumen pyrolyzates. Changes with biodegradation of crude oil in the Ouachita Mountains,Oklahoma

Solid bitumens (grahamite and impsonite) of southeastern Oklahoma have been shown to originate from near-surface alteration of crude oil (Curiale, 1981; Curiale and Harrison, 1981). Pyrolysis of these solids has been employed to compare the sterane distribution of geographically proximate oils to that of the bitumens. The ratio of rearranged to regular steranes is higher in the pyrolyzates than in the oils, a finding consistent with a bitumen origin due to biodegradation of oil. The remaining presence of steranes, particularly regular steranes, in the bitumens suggests that sterane occlusion may have occurred prior to or during the alteration process, thus removing tetracyclic compounds from the influence of microbial attack. These data suggest that pyrolysis-$\text{GC}\text{MS}$ offers a viable approach to correlation problems involving solid bitumens.     

The effect of air flow rate on the kinetics of flotation. Part 2: The transfer of material from the froth over the cell lip

The flotation rate of galena was investigated as a function of air flow rate (AFR) and froth thickness (from 0 to 6 cm) in a batch flotation cell designed to produce a quiescent froth-liquid interface. This cell design limits mechanical breakage of the froth and prevents the hydraulic entrainment of fine particles into the froth phase. The overall transfer rate was characterized by a first-order rate constant, the overall rate constant (ORC). The ORC was found to increase with increasing AFR and with decreasing froth thickness. The transfer rate of material from the slurry to the froth was also determined as a function of AFR, and characterizes by its first-order rate constant, the flotation rate constant (FRC).The froth transport constant (FTC), the first-order constant which characterizes the transport of galena from the froth over the cell lip, was then determined from the ORC and the FRC. The FTC was found to increase with increasing AFR and decreasing froth thickness. For a froth thickness of 5 cm and low-to-intermediate AFR, the FTC was found to be significantly lower than the FRC.The FTC of galena particles of 0–12, 12–32 and 22–40 μm was also determined. At a froth thickness of 5 cm, the FTC decreased with increasing particle size over the full experimental range of AFRs.     

Strontian-loparite and strontio-chevkinite: Two new minerals in rheomorphic fenites from the Paraná Basin carbonatites,South America

Contributions to Mineralogy and Petrology - Strontian-loparite is recognized at Sarambi and Chiriguelo, Paraguay and at Salitre I, Brazil as an accessory mineral in rheomorphic...     

Pisolitic laterite geochemistry in the golden grove massive sulphide district, Western Australia

The two known massive Cu-Zn sulphide deposits in the steeply dipping strata of the Golden Grove District of Western Australia — the Gossan Hill Deposit and Scuddles Prospect — both have a multi-element secondary geochemical dispersion halo in the pisolitic layer of laterite of probable Tertiary age. The Gossan Hill geochemical anomaly is about 1.5 × 2 km and has a Bi-Sn-Mo-In-Sb-As-Cu-Au association. Mean compositions of pisolitic laterite samples range from 4 to 18 times background, with maxima for Bi, Sn and Mo reaching 90 to 100 times background. Relief of Gossan Hill, which rises some 80 m above the laterite plain, would have favoured dispersion during lateritization. Nevertheless at Scuddles, where the laterite surface has only a gentle slope across strike, an anomaly in pisolitic laterite measures 1 to 1.5 by 1.5 to 2.0 km. The anomalous association, Bi-Sn-Mo-Sb-As, is similar to that at Gossan Hill; the mean contents in pisolitic laterite samples from the Scuddles anomaly range from 2.3 to 8 times background, with maxima for Bi being 12 times background.At Gossan Hill, individual pisolites and the concretionary skins contain gossan fragments and cassiterite, indicating mechanical dispersion during interitization. However, anomalous Cu, Zn and As in goethites of the concretionary skins of pisolites and nodules from the centre of the anomaly indicate that there has also been hydromorphic dispersion.The geochemical characteristics of pisolitic laterite samples have been represented by empirically derived additive indices based on up to eleven chalcophile elements. One index is suggested as a method to increase anomaly size and simplify interpretation; a more specific index based on Bi, Sn and Se is suggested for defining more closely the actual centres of mineralization.For routine exploration of lateritic terrain where the dips of the host sequence are steep, 320-m spacing of samples on a triangular grid appears suitable for locating anomalies and generally defining their source. However, for reconnaissance exploration, the density of sampling could be significantly reduced for example to 1 km spacing.     

Analysis of high-voltage,high-resolution images of lattice defects in experimentally-deformed dolomite

Deformation-induced stacking defects in dolomite have been characterised following examination at the cation sublattice level using high-resolution electron microscopy at 500kV. Slip on c (≡{0001}) is observed to produce stacking faults, often de-localised laterally, which are terminated by partial dislocations with Burgers vectors of the form 1/3 [1 \(\overline 1 \) 00]: a model for the faulted dolomite lattice has been constructed which agrees with the image appearance. Slip on f (≡{10 \(\overline 1 \) 2}) produces long planar faults which are established as not being stacking faults, in the normal sense, since there appear to be no offsets of the cation sublattice across the faults, nor any general indication of any terminating partial dislocations: it is proposed that the contrast arises from rotational disorder in CO₃ groups which has resulted from the prior passage of partial dislocations during deformation.