Basaltic and Solution Reference Materials for Iron,Copper and Zinc Isotope Measurements

Iron, Cu and Zn stable isotope systems are applied in constraining a variety of geochemical and environmental processes. Secondary reference materials have been developed by the Institute of Geology, Chinese Academy of Geological Sciences (CAGS), in collaboration with other participating laboratories, comprising three solutions (CAGS‐Fe, CAGS‐Cu and CAGS‐Zn) and one basalt (CAGS‐Basalt). These materials exhibit sufficient homogeneity and stability for application in Fe, Cu and Zn isotopic ratio determinations. Reference values were determined by inter‐laboratory analytical comparisons involving up to eight participating laboratories employing MC‐ICP‐MS techniques, based on the unweighted means of submitted results. Isotopic compositions are reported in per mil notation, based on reference materials IRMM‐014 for Fe, NIST SRM 976 for Cu and IRMM‐3702 for Zn. Respective reference values of CAGS‐Fe, CAGS‐Cu and CAGS‐Zn solutions are as follows: δ⁵⁶Fe = 0.83 ± 0.07 and δ⁵⁷Fe = 1.20 ± 0.13, δ⁶⁵Cu = 0.57 ± 0.06, and δ⁶⁶Zn = ?0.79 ± 0.12 and δ⁶⁸Zn = ?1.65 ± 0.24, respectively. Those of CAGS‐Basalt are δ⁵⁶Fe = 0.15 ± 0.07, δ⁵⁷Fe = 0.22 ± 0.10, δ⁶⁵Cu = 0.12 ± 0.08, δ⁶⁶Zn = 0.17 ± 0.13, and δ⁶⁸Zn = 0.34 ± 0.26 (2s).     

Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

四川省冰雹分布与地形因子关系分析

利用四川省数字高程模型(DEM)和1970—2014年四川省143个气象站点45年冰雹资料,使用相关分析、逐步回归、数字地形分析和分区统计等方法,研究了四川省冰雹分布与地形高程、坡度、坡向、经纬度、地形起伏度及地形切割深度的关系。研究结果表明:四川省冰雹分布有明显的地理分布特征,地形高程、经度、地形起伏度及西北偏西坡向等地形因子是四川省冰雹分布的主要影响因子。建立冰雹与主要地形影响因子的回归方程,模拟四川省冰雹空间分布,结果显示模拟值与实际值分布趋势一致,但模拟数据整体偏小。     

Simultaneous X-ray and IR variability in the quasar 3C 273

From a combination of high-quality X-ray observations from the NASA Rossi X-ray Timing Explorer ( RXTE ) and IR observations from the UK Infrared Telescope (UKIRT) we show that the medium-energy X-ray (3–20 keV) and near-IR fluxes in the quasar 3C 273 are highly correlated. It is widely believed that the X-ray emission in quasars like 3C 273 arises from Compton scattering of low-energy seed photons, and our observations provide the first reliable detection of correlated variations in 3C 273 between the X-ray band and any lower energy band. For a realistic electron distribution we demonstrate that it is probable that each decade of the seed-photon distribution from the mm to IR wavebands contributes roughly equally to the medium-energy X-ray flux. However, the expected mm variations are too small to be detected above the noise, probably explaining the lack of success of previous searches for a correlation between X-ray and mm variations. In addition, we show that the IR leads the X-rays by  0.75±0.25 d  . These observations rule out the 'External Compton' emission process for the production of the X-rays.     

基于遥感和GIS的辅助规划模型--以珠江三角洲可持续土地开发为例

提出利用遥感和 Ｇ Ｉ Ｓ来获得合理的城市发展布局和减少浪费土地资源的新方法。该模型是根据环境经济学资源分配原理和可持续发展理论,通过遥感和 Ｇ Ｉ Ｓ的结合来实现。模型的核心就是保证在时间和空间上合理地安排土地资源。由此评价了珠江三角洲东莞市近年来的土地开发,获得了有意义的结果。并通过模型的运算,给出了规划期内的土地利用的优化方案,以减少浪费土地资源的现象。     

Stratification response of soil water content during rainfall events under different rainfall patterns

Many researchers have studied the influence of rainfall patterns on soil water movement processes using rainfall simulation experiments. However, less attention has been paid to the influence under natural condition. In this paper, rainfall, soil water content (SWC), and soil temperature at 10‐, 20‐, 30‐, 40‐, and 50‐cm depths were simultaneously monitored at 1‐min intervals to measure the variation in SWC (SWCv) in response to rainfall under different rainfall patterns. First, we classified rainfall events into four patterns. During the study period, the main pattern was the advanced rainfall pattern (38% of all rainfall events), whereas the delayed, central, and uniform rainfall patterns had similar frequencies of about 20%. During natural rainfall, rainwater rapidly passed through the top soil layers (10–40 cm) and was accumulated in the bottom layer (50 cm). When a high rainfall pulse occurred, the water storage balance was disturbed, resulting in the drainage of initial soil water from the top layers into the deeper layers. Therefore, the critical function of the top layers and the bottom layers was infiltration and storage, respectively. The source of water stored in the bottom layer was not only rainfall but also the initial soil water in the upper soil layers. Changes in soil temperature at each soil depth were comonitored with SWCv to determine the movement characteristics of soil water under different rainfall patterns. Under the delayed rainfall pattern, preferential flows preferred to occur. Under the other rainfall patterns, matrix flow was the main form of soil water movement. Rainfall amount was a better indicator than rainfall intensity for SWCv in the bottom layer under the delayed rainfall pattern. These results provide insights into the responses of SWCv under different rainfall patterns in northern China.     

Multistatic estimation of high-frequency radar surface currents in the region of Toulon

Ocean Dynamics - The high-frequency radar coastal network in Toulon operates in multistatic mode for the monitoring of the ocean circulation in the Northwestern Mediterranean Sea. With 2...