Late amagmatic extension along the central and eastern segments of the West Philippine Basin fossil spreading axis

The spreading processes within the West Philippine Basin (WPB) remain partly unknown. This study presents an analysis of the tectono-magmatic processes that happened along its spreading axis during the conclusion of the last spreading phase at 33/30 Ma. We demonstrate that the late episode of N-S opening from an E-W-trending spreading system has been followed by a late tectonic event occurring in the central and eastern parts of the basin. This event was responsible for transtensional strain accommodated along the NW-SE faults cutting through the former E-W rift valley in the central part of the basin. In its eastern part, the same event occurred at a larger extent and led to the creation of a new NW-SE axis, obliquely cutting the older E-W spreading segments and their associated spreading fabrics. At this location, several tens of kilometers of slightly oblique amagmatic extension occurred following a ∼60° direction. We propose that this late event is associated with the onset of E-W opening of the Parece-Vela Basin located along the eastern border of the WPB at 30 Ma. Extensive stresses within this basin were probably transmitted to the hot and easily deformable rift zone of the WPB. The newly-created NW-SE axis most likely propagated from east to west, being responsible for scissors opening within the WPB. NE-SW extension ceased when well-organized spreading started at 26 Ma in Parece-Vela Basin, accommodating entirely the global extensive stress pattern.     

Thermal convection in a heterogeneous mantle

Both seismology and geochemistry show that the Earth's mantle is chemically heterogeneous on a wide range of scales. Moreover, its rheology depends strongly on temperature, pressure and chemistry. To interpret the geological data, we need a physical understanding of the forms that convection might take in such a mantle. We have therefore carried out laboratory experiments to characterize the interaction of thermal convection with stratification in viscosity and in density. Depending on the buoyancy ratio B (ratio of the stabilizing chemical density anomaly to the destabilizing thermal density anomaly), two regimes were found: at high B, convection remains stratified and fixed, long-lived thermochemical plumes are generated at the interface, while at low B, hot domes oscillate vertically through the whole tank, while thin tubular plumes can rise from their upper surfaces. Convection acts to destroy the stratification through mechanical entrainment and instabilities. Therefore, both regimes are transient and a given experiment can start in the stratified regime, evolve towards the doming regime, and end in well-mixed classical one-layer convection. Applied to mantle convection, thermochemical convection can therefore explain a number of observations on Earth, such as hot spots, superswells or the survival of several geochemical reservoirs in the mantle. Scaling laws derived from laboratory experiments allow predictions of a number of characteristics of those features, such as their geometry, size, thermal structure, and temporal and chemical evolution. In particular, it is shown that (1) density heterogeneities are an efficient way to anchor plumes, and therefore to create relatively fixed hot spots, (2) pulses of activity with characteristic time-scale of 50–500 Myr can be produced by thermochemical convection in the mantle, (3) because of mixing, no ‘primitive’ reservoir can have survived untouched up to now, and (4) the mantle is evolving through time and its regime has probably changed through geological times. This evolution may reconcile the survival of geochemically distinct reservoirs with the small amplitude of present-day density heterogeneities inferred from seismology and mineral physics.     

From Shiny Shoes to Muddy Reality: Understanding How Meso-State Actors Negotiate the Implementation Gap in Participatory Forest Management

Recent research on participatory forest management (PFM) in the global south has highlighted the existence of a widespread “implementation gap” between the ambitious intent enshrined in legislation and the often partial, disappointing rollout of devolved forest governance on the ground. Here, through an ethnographic case study of forest officers (FOs) in Kenya, we draw on a framework of critical institutionalism to examine how key meso-level actors, or “interface bureaucrats,” negotiate and challenge this implementation gap in everyday forest governance. We go beyond consideration of institutional bricolage in isolation or as an aggregate category, to analyze how bricolage as aggregation, alteration, and/or articulation is variously driven, shaped, and constrained by FOs’ multiple accountabilities and agency. Our analysis highlights the locally specific, contingent, and mutually reinforcing nature of accountability, agency and bricolage, and their explanatory power in relation to the performance and nature of “actually existing” PFM.     

Micromorphological study of construction materials and living floors in the medieval motte of Werken (West Flanders,Belgium)

The “Hoge Andjoen,” an early medieval motte (860–960 A.D.) is an artificial hill made up of at least eight man-made “ground raising/leveling” layers. Each layer is associated with a stabilization level and a well-preserved occupation surface with evidence such as living floors, traces of cultivation, and goat/sheep trampling. The presence of this hill generated a local rise in the original groundwater table present in the natural, buried soil of the site. In some parts of the hill, and with little relation to the sedimentary boundaries, this process generated permanent water stagnation with pronounced anaerobic conditions and locally strong gradients of oxidoreduction. These gradients created a series of particular migrations and accumulations of iron, manganese, and phosphorus components. All organic artifacts, such as oak posts, wooden floors, leather, and seeds remained well preserved in the strongly reduced parts of the hill; they are completely decayed in the aerated zones of the hill. The soil moisture regime within the motte further influenced a series of postdepositional migrations/accumulations of clay and organic matter. The micromorphological study of this archaeological site allows verification of hypotheses developed during field surveying. These hypotheses relate mainly to the origin and mode of dumping of the various types of earthy material, the human activities related to the nine successive living floors, and the traces of numerous postdepo-sitional processes observed throughout this archaeological structure. © 1999 John Wiley & Sons, Inc.     

The Miller Range 090340 and 090206 meteorites: Identification of new brachinite‐like achondrites with implications for the diversity and petrogenesis of the brachinite clan

Miller Range (MIL) 090340 and MIL 090206 are olivine‐rich achondrites originally classified as ureilites. We investigate their petrography, mineral compositions, olivine Cr valences, equilibration temperatures, and (for MIL 090340) oxygen isotope compositions, and compare them with ureilites and other olivine‐rich achondrites. We conclude that they are brachinite‐like achondrites that provide new insights into the petrogenesis of brachinite clan meteorites. MIL 090340,6 has a granoblastic texture and consists of ~97 modal % by area olivine (Fo = molar Mg/[Mg+Fe] = 71.3 ± 0.6). It also contains minor to trace augite, chromite, chlorapatite, orthopyroxene, metal, troilite, and terrestrial Fe‐oxides. Approximately 80% by area of MIL 090206,5 has a granoblastic texture of olivine (Fo 72.3 ± 0.1) plus minor augite and chromite, similar to MIL 090340 but also containing minor plagioclase. The rest of the section consists of a single crystal of orthopyroxene (~11 × 3 mm), poikilitically enclosing rounded grains of olivine (Fo = 76.1 ± 0.6), augite, chromite, metal, and sulfide. Equilibration temperatures for MIL 090340 and MIL 090206, calculated from olivine‐spinel, olivine‐augite, and two‐pyroxene thermometry range from ~800 to 930 °C. In both samples, symplectic intergrowths of Ca‐poor orthopyroxene + opaque phases (Fe‐oxides, sulfide, metal) occur as rims on and veins/patches within olivine. Before terrestrial weathering, the opaques were probably mostly sulfide, with minor metal. All petrologic properties of MIL 090340 and MIL 090206 are consistent with those of brachinite clan meteorites, and largely distinct from those of ureilites. Oxygen isotope compositions of olivine in MIL 090340 (δ¹⁸O = 5.08 ± 0.30‰, δ¹⁷O = 2.44 ± 0.21‰, and Δ¹⁷O = ?0.20 ± 0.12‰) are also within the range of brachinite clan meteorites, and well distinguished from ureilites. Olivine Cr valences in MIL 090340 and the granoblastic area of MIL 090206 are 2.57 ± 0.06 and 2.59 ± 0.07, respectively, similar to those of three brachinites also analyzed here (Brachina, Hughes 026, Nova 003). They are higher than those of olivine in ureilites, even those containing chromite. The valence systematics of MIL 090340, MIL 090206, and the three analyzed brachinites (lower Fo = more oxidized Cr) are consistent with previous evidence that brachinite‐like parent bodies were inherently more oxidized than the ureilite parent body. The symplectic orthopyroxene + sulfide/metal assemblages in MIL 090340, MIL 090206, and many brachinite clan meteorites have superficial similarities to characteristic “reduction rims” in ureilites. However, they differ significantly in detail. They likely formed by reaction of olivine with S‐rich fluids, with only minor reduction. MIL 090340 and the granoblastic area of MIL 090206 are similar in modal mineralogy and texture to most brachinites, but have higher Fo values typical of brachinite‐like achondrites. The poikilitic pyroxene area of MIL 090206 is more typical of brachinite‐like achondrites. The majority of their properties suggest that MIL 090340 and MIL 090206 are residues of low‐degree partial melting. The poikilitic area of MIL 090206 could be a result of limited melt migration, with trapping and recrystallization of a small volume of melt in the residual matrix. These two samples are so similar in mineral compositions, Cr valence, and cosmic ray exposure ages that they could be derived from the same lithologic unit on a common parent body.     

Wood export prediction at the watershed scale

Wood export from a watershed is a function of peak annual discharge, but one hydrologic relationship alone does not fully explain observed variability. Consideration of physical processes that influence the amount of wood available for transport is needed. However, wood recruitment, storage, mobilization, breakage, and transport rates and processes remain difficult to quantify. A theoretical wood transport equation focused on variations in discharge was the motivation for investigation into watershed‐specific wood export rates. Herein, multiplicative coefficients categorized by water year type are developed, paired with the equation, and validated to provide a new method for prediction of wood export at the watershed scale. The coefficients are defined as representing a broad suite of watershed processes that encompass spatio‐temporally variable scales. Two complementary datasets from the 1097 km² mountainous North Yuba River, California watershed were used. Wood surveys above New Bullards Bar Reservoir yielded a wood availability estimate of 250 000–300 000 m³ along the channel network. Annual wood export into the reservoir was field‐surveyed in 2010, 2012 and 2013, and estimated in seven years via remotely sensed images over the 30 year study period of water years 1985–2014. Empirical, watershed‐scale wood export rates ranged from 0.3–5.6%. Comparison of predicted quantities using the new DVWP (discharge variations modified by watershed processes) wood export equation to observed wood export quantities resulted in an aggregate error rate of ±10%. When individual wood export quantities were compared, predicted to observed varied by 0.5–3.0 times. Total wood export of 59 000–71 000 m³ was estimated over the 30 year period, yielding a rate of 1.8 to 2.2 m³/year/km². Wood export predictive capabilities at the watershed scale may help water resource and regulatory agencies plan for wood transfers to augment downstream ecosystems. Copyright © 2017 John Wiley & Sons, Ltd.     

Monitoring gravel augmentation in a large regulated river and implications for process‐based restoration

The artificial gravel augmentation of river channels is increasingly being used to mitigate the adverse effects of river regulation and sediment starvation. A systematic framework for designing and assessing such gravel augmentations is still lacking, notably on large rivers. Monitoring is required to quantify the movement of augmented gravel, measure bedform changes, assess potential habitat enhancement, and reduce the uncertainty in sediment management. Here we present the results of an experiment conducted in the Rhine River (French and German border). In 2010, 23 000 m³ of sediments (approximately the mean annual bedload transport capacity) were supplied in a by‐passed reach downstream of the Kembs dam to test the feasibility of enhancing sediment transport and bedform changes. A 620‐m‐long and 12‐m‐wide gravel deposit was created 8 km downstream from the dam. Monitoring included topo‐bathymetric surveys, radio‐frequency particle tracking using passive integrated transponder (PIT) tags, bed grain size measurement, and airborne imagery. Six surveys performed since 2009 have been described (before and after gravel augmentation, and after Q₂ and Q₁₅ floods). The key findings are that (i) the augmented gravel was partially dispersed by the first flood event of December 2010 (Q₁); (ii) PIT tags were found up to 3200 m downstream of the gravel augmentation site after four years, but the effects of gravel augmentation could not be clearly distinguished from the effects of floods and internal remobilization on more than 3500 m downstream; (iii) linear and log‐linear relationships linking bedload transport, particle mobility, and grain size were established; and (iv) combined bathymetry and PIT tag surveys were useful for evaluating potential environmental risks and the first morpho‐ecological responses. This confirmed the complementary nature of such techniques in the monitoring of gravel augmentation in large rivers. Copyright © 2017 John Wiley & Sons, Ltd.     

The role of hydrogeological setting in two Canadian peatlands investigated through 2D steady-state groundwater flow modelling

This study investigated how hydrogeological setting influences aquifer–peatland connections in slope and basin peatlands. Steady-state groundwater flow was simulated using Modflow on 2D transects for an esker slope peatland and for a basin peatland in southern Quebec (Canada). Simulations investigated how hydraulic heads and groundwater flow exported toward runoff from the peatland can be influenced by recharge, hydraulic properties, and heterogeneity. The slope peatland model was strongly dominated by horizontal flow from the esker. This suggests that slope peatlands are dependent on the hydrogeological conditions of the adjacent aquifer reservoir, but are resilient to hydrological changes. The basin peatland produced groundwater outflow to the surface aquifer. Lateral and vertical peat heterogeneity due to peat decomposition or compaction were identified as having a significant influence on fluxes. These results suggest that basin peatlands are more dependent on recharge conditions, and could be more susceptible to land use and climate changes.     

Mid‐Holocene environmental changes in the Bay of Skaill,Mainland Orkney,Scotland: an integrated geomorphological,sedimentological and stratigraphical study

A detailed multidisciplinary investigation of intertidal freshwater sediments exposed in the north of the Bay of Skaill, Mainland Orkney, Scotland, have revealed a complex sedimentary sequence. This provided evidence for dynamic coastal environmental changes in the area since the mid‐Holocene. Freshwater ponds developed on glacial sediments ca. 6550 ± 80 yr BP (cal. bc 5590–5305). From ca. 6120 ± 70 yr BP (cal. bc 5040–4855), these were infilled by blown sand from the distal edge of a dune ridge located to the west. Thereafter, a series of sand‐blow events alternating with periods of quiescence occurred until ca. 4410 ± 60 yr BP (cal. bc 3325–2900). Between ca. 5240 ± 160 and 4660 ± 80 yr BP (cal. bc 4370–3115), pollen and charcoal records show evidence of anthropogenic activities, associated with the nearby Neolithic settlement of Skara Brae. Agriculture was probably affected by recurrent sand movement and widespread deposition of calcium carbonate in the hinterland of the bay. Machair development between ca. 6100 and 5000 yr BP (cal. bc 5235–3540) corresponds to a mid‐Holocene phase of dune formation recorded elsewhere in northwest Europe. The more recent and progressive formation of the bay has probably been related to increasing external forcing via storminess, long‐term relative sea‐level change and sediment starvation within this exposed environment. Copyright © 2000 John Wiley & Sons, Ltd.