Lava flow simulations using discharge rates from thermal infrared satellite imagery during the 2006 Etna eruption

Techniques capable of measuring lava discharge rates during an eruption are important for hazard prediction, warning, and mitigation. To this end, we developed an automated system that uses thermal infrared satellite MODIS data to estimate time-averaged discharge rate. MODIS-derived time-varying discharge rates were used to drive lava flow simulations calculated using the MAGFLOW cellular automata model, allowing us to simulate the discharge rate-dependent spread of lava as a function of time. During the July 2006 eruption of Mount Etna (Sicily, Italy), discharge rates were estimated at regular intervals (i.e., up to 2 times/day) using the MODIS data. The eruption lasted 10 days and produced a ~3-km-long lava flow field. Time-averaged discharge rates extracted from 13 MODIS images were utilized to produce a detailed chronology of lava flow emplacement, demonstrating how infrared satellite data can be used to drive numerical simulations of lava flow paths during an ongoing eruptive event. The good agreement between simulated and mapped flow areas indicates that model-based inundation predictions, driven by time-varying discharge rate data, provide an excellent means for assessing the hazard posed by ongoing effusive eruptions.     

Volcaniclastic resedimentation on the northern slope of Vesuvius as a direct response to eruptive activity

A new archaeological excavation on the northern slope of Vesuvius has provided invaluable information on the eruptive activity and post-eruptive resedimentation events between the late Roman Empire and 1631. A huge Roman villa, thought to belong to the Emperor Augustus, survived the effects of the 79 a.d. Plinian eruption, but was mainly engulfed in volcaniclastic materials eroded and redeposited immediately after a subsequent eruption or during repose periods. Primary pyroclastic deposits of the 472 a.d. eruption are only few centimeters thick but are overlain by reworked volcaniclastic deposits up to 5 m thick. The resedimented volcaniclastic succession shows distinct sedimentary facies that are interpreted as debris flow deposits, hyperconcentrated flow deposits, and channel-fill deposits. This paper has determined that the aggradation above the roman level is about 9 m in 1,200 years, leading an impressive average rate of 0.75 cm/year.     

Late Quaternary transgressive erosion and deposition in a modern epicontinental shelf: The Adriatic semienclosed basin

The Adriatic Sea is a modern epicontinental basin where the late Quaternary transgressive systems tract shows substantial variations within two contrasting shelf domains, separated by a 250-m-deep remnant basin: a lowgradient shelf in the north, and a steeper margin in the south. Four differentiated sedimentary responses reflect contrasting physiographic domains and differences in the ratio between oceanographic regime and sediment input during relative sea-level rise. The progressive widening of the Adriatic epicontinental shelf, up to seven times its low-stand extent, also determines variations in the style of transgressive deposition by controlling major changes in oceanographic circulation.     

The Campanian Ignimbrite and Codola tephra layers: Two temporal/stratigraphic markers for the Early Upper Palaeolithic in southern Italy and eastern Europe

Tephra layers from archaeological sites in southern Italy and eastern Europe stratigraphically associated with cultural levels containing Early Upper Palaeolithic industry were analysed. The results confirm the occurrence of the Campanian Ignimbrite tephra (CI; ca. 40 cal ka BP) at Castelcivita Cave (southern Italy), Temnata Cave (Bulgaria) and in the Kostenki–Borshchevo area of the Russian Plain. This tephra, originated from the largest eruption of the Phlegrean Field caldera, represents the widest volcanic deposit and one of the most important temporal/stratigraphic markers of western Eurasia. At Paglicci Cave and lesser sites in the Apulia region we recognise a chemically and texturally different tephra, which lithologically, chronologically and chemically matches the physical and chemical characteristics of the Plinian eruption of Codola; a poorly known Late Pleistocene explosive event from the Neapolitan volcanoes, likely Somma–Vesuvius. For this latter, we propose a preliminary age estimate of ca. 33 cal ka BP and a correlation to the widespread C-10 marine tephra of the central Mediterranean. The stratigraphic position of both CI and Codola tephra layers at Castelcivita and Paglicci help date the first and the last documented appearance of Early Upper Palaeolithic industries of southern Italy to ca. 41–40 and 33 cal ka BP, respectively, or between two interstadial oscillations of the Monticchio pollen record – to which the CI and Codola tephras are physically correlated – corresponding to the Greenland interstadials 10–9 and 5. In eastern Europe, the stratigraphic and chronometric data seem to indicate an earlier appearance of the Early Upper Palaeolithic industries, which would predate of two millennia at least the overlying CI tephra. The tephrostratigraphic correlation indicates that in both regions the innovations connected with the so-called Early Upper Palaeolithic – encompassing subsistence strategy and stone tool technology – appeared and evolved during one of the most unstable climatic phases of the Last Glacial period. On this basis, the marked environmental unpredictability characterising this time-span is seen as a potential ecological factor involved in the cultural changes observed.     

Finite element evaluation of the effects of faulting on a shallow tunnel in alluvial soil

A numerical estimation is presented on the effects induced in an existing tunnel by the development of a fault from the deep bedrock during a seismic event. The spreading of the fault within the alluvial deposit hosting the tunnel, and the consequent effects on its permanent liner, are studied in static conditions through a series of elastic-plastic, plane strain finite element analyses. They account for the reduction of the shear strength and stiffness characteristics of the faulting zone with increasing irreversible strains. Even though the calculations require only “standard”, e.g. peak and residual, material parameters it is shown that these properties can hardly be obtained for the alluvial deposit at hand. To overcome this drawback a relatively large scale in-situ tests could be performed and its results could be interpreted through a suitable back analysis. This would permit characterizing the numerical model to be subsequently adopted for the analysis of the faulting process.     

A methodological approach for estimating turbidity in a river

During the operations of purging and disposal of sediments of a reservoir it is necessary to know the values of turbidity in the river downstream in natural condition,in the absence of dams or river training works.The paper shows that under these conditions the ratio of the average values of sediment discharge to the annual maximum value of water discharge is a function of the average annual turbidity.Turbidity can be considered as representative synthetic index of the climatic conditions,the lithological features and the land cover of the basin,and the geometric characteristics of the river network.The proposed relationship of sediment discharge as a function of water discharge were validated on the basis of data collected from different Italian regions that have very different morphological,geo-lithological and rainfall features and that are characterised by a basin area changing between a few dozen and thousands of square kilometres.The results can be considered satisfying.     

U–Pb zircon data of Variscan meta-igneous and igneous acidic rocks from an Alpine shear zone in Calabria (southern Italy)

The paper deals with the U–Pb data of zircon separated from three samples representative of mylonitic leucogranites, trondhjemites and pegmatites occurring along the Alpine tectonic zone between the Castagna and Sila Units in northern Calabria. These mylonites are associated to Variscan granitic-granodioritic biotite-rich augen gneisses derived from Neo-Proterozoic-Early Cambrian protoliths. Apparent ages ranging from Early Cambrian to post-Variscan have been obtained. Th, U and rare earth elements have been determined in two zircon domains of mylonitic leucogranite and trondhjemite giving different ages in order to get information relative to their geological significance. The pegmatite preserves intrusive contact with the augen gneisses and with the other mylonites; it turns out to be emplaced at 290–300 Ma, like the Variscan plutonites of the Castagna Unit. The deformation masks the original contacts of the mylonitic leucogranite and trondhjemite with the biotite-rich augen gneisses. The age-group averaging 540 Ma is interpreted as indicative of the emplacement of the protoliths and it coincides with the age previously determined for the emplacement of the protoliths of the biotite-rich augen gneisses. Zircon from the mylonitic pegmatite includes domains showing concordant and discordant ages younger than 290 Ma, thus reflecting various degrees of partial resetting and Pb-loss caused by post-Variscan events. Zircon from the mylonitic leucogranite and trondhjemite includes apparent ages between 300 and 280 Ma as well as ages younger than 250 Ma. Perturbation of U–Pb system by Alpine shearing appears evident; however, possibile effects caused by thermal input and hydrothermal fluid infiltration from the Variscan plutonites cannot be excluded.     

Stratigraphic architecture and anthropic impacts on subsoil to assess the intrinsic potential vulnerability of groundwater: the northeastern Campania Plain case study, southern Italy

This study attempts to assess the aquifer vulnerability in the northeastern sector of the Campania Plain (southern Italy). The area is a highly populated region with anthropic impacts caused by rapid urban growth, quarrying, agricultural and industrial activities and uncontrolled waste storage. The main geologic feature of this plain is the alternation of alluvial/transitional and volcaniclastic deposits of Late Pleistocene–Holocene age. The study was performed integrating different sets of geologic and environmental data to restore the stratigraphic architecture and to assess anthropic impacts on subsoil. The reconstruction of stratigraphic subsurface architecture was based on remarkable geodatabase, concerning well log stratigraphies. Specific insights have been delineated on the volcaniclastic lithofacies heteropies across the entire area of study to highlight the differences in lithification degree and permeability. The contribution of pedogenesis on the reconstruction of the stratigraphic setting was also considered for the relative implications on groundwater quality concerns, as paleosols are usually regarded as aquitards. All of this information has been managed into a GIS project to produce a detailed 3D geological reconstruction, integrated with hydrogeological information to provide a model of the aquifer under study, highlighting sites of greater vulnerability to pollution. The anthropic impacts on subsoil were assessed by evaluating land-uses and overlaying the ANHI (Agricultural Nitrate Hazard Index) Map. The integration of the above datasets has allowed to check the reliability of the previsional empirical model with respect to the hydrostratigraphic model based on a thorough stratigraphic model and to verify the real potential of contamination.