An empirical model of subcritical bedform migration

The ability to predict bedform migration in rivers is critical for estimating bed material load, yet there is no relation for predicting bedform migration (downstream translation) that covers the full range of conditions under which subcritical bedforms develop. Here, the relation between bedform migration rates and transport stage is explored using a field and several flume data sets. Transport stage is defined as the non‐dimensional Shields stress divided by its value at the threshold for sediment entrainment. Statistically significant positive correlations between both ripple and dune migration rates and transport stage are found. Stratification of the data by the flow depth to grain‐size ratio improved the amount of variability in migration rates that was explained by transport stage to ca 70%. As transport stage increases for a given depth to grain‐size ratio, migration rates increase. For a given transport stage, the migration rate increases as the flow depth to grain‐size ratio gets smaller. In coarser sediment, bedforms move faster than in finer sediment at the same transport stage. Normalization of dune migration rates by the settling velocity of bed sediment partially collapses the data. Given the large amount of variability that arises from combining data sets from different sources, using different equipment, the partial collapse is remarkable and warrants further testing in the laboratory and field.     

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.     

Computational microstructure modeling to estimate progressive moisture damage behavior of asphaltic paving mixtures

This paper presents a computational microstructure model to estimate the progressive moisture damage of multiphase asphaltic paving mixtures. Moisture damage because of water transport is incorporated with mechanical loading through a finite element method. To simulate nonlinear damage evolution in the mixtures, the model includes Fickian moisture diffusion, a cohesive zone model to simulate the gradual fracture process, and a degradation characteristic function to represent the reduction of material properties because of moisture infiltration. With the model developed, various parametric analyses are conducted to investigate how each model parameter affects the material‐specific moisture damage mechanism and damage resistance potential of the mixtures. Analysis results clearly demonstrate the significance of physical and mechanical properties of mixture components and geometric characteristics of microstructure for the better design of asphaltic paving mixtures and roadway structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.     

Palaeoceanographic changes in the North Atlantic during the Mid‐Pleistocene Transition (MIS 31–19) as inferred from planktonic foraminiferal and calcium carbonate records

Marine sediments from the Integrated Ocean Drilling Project (IODP) Site U1314 (56.36°N, 27.88°W), in the subpolar North Atlantic, were studied for their planktonic foraminifera, calcium carbonate content, and Neogloboqudrina pachyderma sinistral (sin.) δ¹³C records in order to reconstruct surface and intermediate conditions in this region during the Mid‐Pleistocene Transition (MPT). Variations in the palaeoceanography and regional dynamics of the Arctic Front were estimated by comparing CaCO₃ content, planktonic foraminiferal species abundances, carbon isotopes and ice‐rafted debris (IRD) data from Site U1314 with published data from other North Atlantic sites. Site U1314 exhibited high abundances of the polar planktonic foraminifera N. pachyderma sin. and low CaCO₃ content until Marine Isotope Stage (MIS) 26, indicating a relatively southeastward position of the Arctic Front (AF) and penetration of colder and low‐salinity surface arctic water‐masses. Changing conditions after MIS 25, with oscillations in the position of the AF, caused an increase in the northward export of the warmer North Atlantic Current (NAC), indicated by greater abundances of non‐polar planktonic foraminifera and higher CaCO₃. The N. pachyderma sin. δ¹³C data indicate good ventilation of the upper part of the intermediate water layer in the eastern North Atlantic during both glacial and interglacial stages, except during Terminations 24/23, 22/21 and 20/1. In addition, for N. pachyderma (sin.) we distinguished two morphotypes: non‐encrusted and heavily encrusted test. Results indicate that increases in the encrusted morphotype and lower planktonic foraminiferal diversity are related to the intensification of glacial conditions (lower sea‐surface temperatures, sea‐ice formation) during MIS 22 and 20.     

Optical dating of sand wedges and ice‐wedge casts from Qinghai Lake area on the northeastern Qinghai‐Tibetan Plateau and its palaeoenvironmental implications

Sand wedges and ice‐wedge casts in the Qinghai Lake area on the northeastern Qinghai‐Tibetan Plateau (QTP) occur within alluvial gravel or river terrace deposits. In this study, we report the results of quartz Optically Stimulated Luminescence (OSL) dating of the infill of five relict sand wedges and one ice‐wedge cast. Combining our dating results with previously published luminescence ages of permafrost wedges in the Qinghai Lake area, we show that sand/ice wedges formed at c. 62 ka, c. 45 ka and between 30 and 15 ka, and that the mean annual air temperature (MAAT) was depressed by at least ～3°C relative to present during the sand/ice‐wedge formation periods. This new work is partially corroborated by post‐LGM proxy records from lakes and aeolian deposits reported from the northeastern QTP. It also significantly extends the palaeoenvironmental record in the region in the period before the LGM, when other proxy records are rare, allowing a better understanding of the palaeoenvironmental conditions on the northeastern QTP.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

Staurolite porphyroblast controls on local bulk compositional and microstructural changes during decompression of a St–Bt–Grt–Crd–And schist (Ancasti metamorphic complex,Sierras Pampeanas,W Argentina)

The staurolite–biotite–garnet–cordierite–andalusite–plagioclase–muscovite–quartz metapelitic mineral assemblage has been frequently interpreted in the literature as a result of superimposition of various metamorphic events, for example, in polymetamorphic sequences. The assemblage was identified in schists from the Ancasti metamorphic complex (Sierras Pampeanas of Argentina) where previous authors have favoured the polymetamorphic genetic interpretation. A pseudosection in the MnNCKFMASH system for the analysed XRF bulk composition predicts the stability of the sub‐assemblage staurolite–biotite–garnet–plagioclase–muscovite–quartz, and the compositional isopleths also agree with measured mineral compositions. Nevertheless, the XRF pseudosection does not predict any field with staurolite, andalusite and cordierite being stable together. As a result of more detailed modelling making use of the effective bulk composition concept, our interpretation is that the staurolite–biotite–garnet–plagioclase–muscovite–quartz sub‐assemblage was present at peak metamorphic conditions, 590 °C and 5.2 kbar, but that andalusite and cordierite grew later along a continuous P–T path. These minerals are not in mutual contact and are observed in separate microstructural domains with different proportions of staurolite. These domains are explained as a result of local reaction equilibrium subsystems developed during decompression and influenced by the previous peak crystal size and local modal distribution of staurolite porphyroblasts that have remained metastable. Thus, andalusite and cordierite grew synchronously, although in separate microdomains, and represent the decompression stage at 565 °C and 3.5 kbar.     

Quantifying Barrovian metamorphism in the Danba Structural Culmination of eastern Tibet

The Danba Structural Culmination is a tectonic window into the late Triassic to early Jurassic Songpan‐Garzê Fold Belt of eastern Tibet, which exposes an oblique section through a complete Barrovian‐type metamorphic sequence. Systematic analysis of a suite of metapelites from this locality has enabled a general study of Barrovian metamorphism, and provided new insights into the early thermotectonic history of the Tibetan plateau. The suite was used to create a detailed petrographic framework, from which four samples ranging from staurolite to sillimanite grade were selected for thermobarometry and geochronology. Pseudosection analysis was applied to calculate P–T path segments and determine peak conditions between staurolite grade at ～5.2 kbar and 580 °C and sillimanite grade at ～6.0 kbar and 670 °C. In situ U–Pb monazite geochronology reveals that staurolite‐grade conditions were reached at 191.5 ± 2.4 Ma, kyanite‐grade conditions were attained at 184.2 ± 1.5 Ma, and sillimanite‐grade conditions continued until 179.4 ± 1.6 Ma. Integration of the results has provided constraints on the evolution of metamorphism in the region, including a partial reconstruction of the regional metamorphic field gradient. Several key features of Barrovian metamorphism are documented, including nested P–T paths and a polychronic field gradient. In addition, several atypical features are noted, such as P–T path segments having similar slopes to the metamorphic field gradient, and T_max and P_max being reached simultaneously in some samples. These features are attributed to the effects of slow tectonic burial, which allows for thermal relaxation during compression. While nested, clockwise P–T–t loops provide a useful framework for Barrovian metamorphism, this study shows that the effects of slow burial can telescope this model in P–T space. Finally, the study demonstrates that eastern Tibet experienced a significant phase of crustal thickening during the Mesozoic, reinforcing the notion that the plateau may have a long history of uplift and growth.