Groundwater flow and solute transport at the Mourquong saline-water disposal basin, Murray Basin, southeastern Australia

Saline groundwater and drainage effluent from irrigation are commonly stored in some 200 natural and artificial saline-water disposal basins throughout the Murray-Darling Basin of Australia. Their impact on underlying aquifers and the River Murray, one of Australia's major water supplies, is of serious concern. In one such scheme, saline groundwater is pumped into Lake Mourquong, a natural groundwater discharge complex. The disposal basin is hydrodynamically restricted by low-permeability lacustrine clays, but there are vulnerable areas in the southeast where the clay is apparently missing. The extent of vertical and lateral leakage of basin brines and the processes controlling their migration are examined using (1) analyses of chloride and stable isotopes of water (²H/¹H and ¹⁸O/¹⁶O) to infer mixing between regional groundwater and lake water, and (2) the variable-density groundwater flow and solute-transport code SUTRA. Hydrochemical results indicate that evaporated disposal water has moved at least 100 m in an easterly direction and that there is negligible movement of brines in a southerly direction towards the River Murray. The model is used to consider various management scenarios. Salt-load movement to the River Murray was highest in a "worst-case" scenario with irrigation employed between the basin and the River Murray. Present-day operating conditions lead to little, if any, direct movement of brine from the basin into the river. Electronic Publication     

The effects of rock uplift and rock resistance on river morphology in a subduction zone forearc,Oregon, USA

Relationships between riverbed morphology, concavity, rock type and rock uplift rate are examined to independently unravel the contribution of along-strike variations in lithology and rates of vertical deformation to the topographic relief of the Oregon coastal mountains. Lithologic control on river profile form is reflected by convexities and knickpoints in a number of longitudinal profiles and by general trends of concavity as a function of lithology. Volcanic and sedimentary rocks are the principal rock types underlying the northern Oregon Coast Ranges (between 46°30′ and 45°N) where mixed bedrock–alluvial channels dominate. Average concavity, θ, is 0·57 in this region. In the alluviated central Oregon Coast Ranges (between 45° and 44°N) values of concavity are, on average, the highest (θ = 0·82). South of 44°N, however, bedrock channels are common and θ = 0·73. Mixed bedrock–alluvial channels characterize rivers in the Klamath Mountains (from 43°N south; θ = 0·64). Rock uplift rates of ≥0·5 mm a⁻¹, mixed bedrock–alluvial channels, and concavities of 0·53–0·70 occur within the northernmost Coast Ranges and Klamath Mountains. For rivers flowing over volcanic rocks θ = 0·53, and θ = 0·72 for reaches crossing sedimentary rocks. Whereas channel type and concavity generally co-vary with lithology along much of the range, rivers between 44·5° and 43°N do not follow these trends. Concavities are generally greater than 0·70, alluvial channels are common, and river profiles lack knickpoints between 44·5° and 44°N, despite the fact that lithology is arguably invariant. Moreover, rock uplift rates in this region vary from low, ≤0·5 mm a⁻¹, to subsidence (<0 mm a⁻¹). These observations are consistent with models of transient river response to a decrease in uplift rate. Conversely, the rivers between 44° and 43°N have similar concavities and flow on the same mapped bedrock unit as the central region, but have bedrock channels and irregular longitudinal profiles, suggesting the river profiles reflect a transient response to an increase in uplift rate. If changes in rock uplift rate explain the differences in river profile form and morphology, it is unlikely that rock uplift and erosion are in steady state in the Oregon coastal mountains. Copyright © 2006 John Wiley & Sons, Ltd.     

Which way to the Moon?

Andrew Ball and Ian Crawford report on NASA's planning for a return to the Moon, with some thoughts on opportunities open to the UK.     

Remotely sensed estimation of forest canopy density: A comparison of the performance of four methods

In recent years, a number of alternative methods have been proposed to predict forest canopy density from remotely sensed data. To date, however, it remains difficult to decide which method to use, since their relative performance has never been evaluated. In this study the performance of: (1) an artificial neural network, (2) a multiple linear regression, (3) the forest canopy density mapper and (4) a maximum likelihood classification method was compared for prediction of forest canopy density using a Landsat ETM+ image. Comparison of confusion matrices revealed that the regression model performed significantly worse than the three other methods. These results were based on a z-test for comparison of weighted kappa statistics, which is an appropriate statistic for analysis of ranked categories. About 89% of the variance of the observed canopy density was explained by the artificial neural networks, which outperformed the other three methods in this respect. Moreover, the artificial neural networks gave an unbiased prediction, while other methods systematically under or over predicted forest canopy density. The choice of biased method could have a high impact on canopy density inventories.     

Synergy of multiple geophysical approaches to unravel explosive eruption conduit and source dynamics - A case study from Stromboli

An effective approach to understanding the dynamics of explosive volcanic eruptions and the conduit systems that drive them is through synergy of multiple data sets. Three data sets that lend themselves to ease of integration are seismic, infrasonic and thermal. Although approaches involving these data have been used to record volcanological phenomena since 1862, 1955 and 1965, respectively, their integrated use has only developed since 1999. When combined, these three data sets allow constraint of shallow system geometry and the dynamics of the explosive events that occur within that system. Using Stromboli volcano (Italy) as a case study, we review the complete range of geochemical and geophysical studies that can be applied. In doing so, we aim to show how integration of these diverse studies allows insights into a plumbing system and the dynamics of the eruptive activity that the system feeds. When combined at Stromboli, these data provide constraint of multiple system parameters including chamber depths, gas and magma fluxes, shallow system magma residence times, explosion source depths, and the rise/ejection velocities of ascending gas slugs and ejecta. In turn, these results allow various conduit and eruption dynamic models to be applied and tested.The persistent and repeated mildly explosive events that characterize Stromboli have been modeled in terms of the coalescence of gas within the magma to form large gas slugs that ascend the remaining portion of the conduit to burst at the free surface. Our integrated seismic, infrasonic and thermal data sets indicate that gas coalescence occurs at a depth of ∼260 m, with a typical event frequency of ∼9/h. Infrasonic and thermal data show the explosion source to be located 20-220 m below the vent. Thermal data give emission velocities for the ejected fragments of 8-20 m/s, which converts to gas jet velocities of 23-39 m/s. Tracking these parameters in space and time shows that, although eruptions at Stromboli can be grouped into two characteristic types (simple and complex-each of which characterizes a particular crater, NE and SW, respectively), events within each type show significant short-term variability. The system does, however, appear robust, maintaining its characteristic strombolian eruption style after significant effusive phases and more energetic explosive events.     

Grounding the virtual: The material effects of electronic grocery shopping

This paper addresses the materiality of computer-mediated retailing. The paper uncovers the “hidden geography” of e-commerce, considering how the seemingly simple act of doorstep food delivery is explicated in urban form, and in transportation and communication infrastructures. The paper categorises electronic grocery shopping (EGS) enterprises into three types: “bricks and clicks”, “pure-play” and the “infomediary”, and examines how each type of operation has been materialised in the urban landscape, and the infrastructure upon which each draws. The paper then considers the strategies EGS operations have used to offset the “killer costs” of logistics for electronic commerce. The paper concludes by considering how electronic grocery shopping is embedded within broader trends in consumer behaviour, and how these trends are manifested in the materiality of urban life. The paper argues that online grocers are in the vanguard of ventures habituating customers to the remote ordering and delayed delivery of products to the home. Through controlling this “last mile”, online retailers hope to extend the product offer to higher-margin and more problematic products, which are in themselves unprofitable to distribute direct to the customer, but which can be profitably combined with a grocery shop.     

Geographic and temporal trends in proboscidean and human radiocarbon histories during the late Pleistocene

The causes of large animal extinctions at the end of the Pleistocene remain a hotly debated topic focused primarily on the effects of human over hunting and climate change. Here we examine multiple, large radiocarbon data sets for humans and extinct proboscideans and explore how variation in their temporal and geographic distributions were related prior to proboscidean extinction. These data include 4532 archaeological determinations from Europe and Siberia and 1177 mammoth and mastodont determinations from Europe, Siberia, and North America. All span the period from 45,000 to 12,000 calendar years BP. We show that while the geographic ranges of dated human occupations and proboscidean remains overlap across the terminal Pleistocene of the Old World, the two groups remain largely segregated and increases in the frequency of human occupations do not coincide with declines in proboscidean remains. Prior to the Last Glacial Maximum (LGM; ca 21,000 years BP), archaeological ¹⁴C determinations increase slightly in frequency worldwide while the frequency of dated proboscidean remains varies depending on taxon and location. After the LGM, both sympatric and allopatric groups of humans and proboscideans increase sharply as climatic conditions ameliorate. Post-LGM radiocarbon frequencies among proboscideans peak at different times, also depending upon taxon and location. Woolly mammoths in Beringia reach a maximum and then decline beginning between 16,000 and 15,500 years BP, woolly mammoths in Europe and Siberia ca 14,500 and 13,500 BP, and Columbian mammoth and American mastodont only after 13,000 BP. Declines among woolly mammoths appear to coincide with the restructuring of biotic communities following the Pleistocene–Holocene transition.     

The ortho- to para- ratio of H2 in the starburst of NGC 253

We present measurements of several near-infrared emission lines from the nearby galaxy NGC 253. We have been able to measure four H₂ lines across the circumnuclear starburst, from which we estimate the ortho- to para- ratio of excited H₂ to be ∼2. This indicates that the bulk of the H₂ emission arises from photodissociation regions (PDRs), rather than from shocks. This is the case across the entire region of active star formation.
As the H₂ emission arises from PDRs, it is likely that the ratio of H₂ to Brγ (the bright hydrogen recombination line) is a measure of the relative geometry of O and B stars and PDRs. Towards the nucleus of NGC 253 the geometry is deduced to be tightly clustered O and B stars in a few giant H  II regions that are encompassed by PDRs. Away from the nuclear region, the geometry becomes that of PDRs bathed in a relatively diffuse ultraviolet radiation field.
The rotation curves of 1–0 S(1) and Brγ suggest that the ionized gas is tracing a kinetic system different from that of the molecular gas in NGC 253, particularly away from the nucleus.     

Aliphatic and aromatic hydrocarbons in benthic invertebrates from two sites in Antarctica

Samples of marine benthic invertebrates collected from two sites in the Antarctic have been analysed for both aliphatic and aromatic hydrocarbons in order to establish baseline concentrations for some classes of hydrocarbons.Samples from Signy Island, a pristine site, contained low concentrations of the hydrocarbons determined, whereas those from King Edward Cove, South Georgia, contained significantly higher concentrations. King Edward Cove has a known history of pollution from whaling operations.Platt & Mackie (1979) have suggested that the hydrocarbons in sediments from King Edward Cove are a result of the world-wide dissemination of the pyrolysis products of fossil fuels. Our work suggests, in contrast, that the hydrocarbons in the benthos are derived from local sources.     

Leachable trace elements in San Francisco bay sediments: Indicators of sources and estuarine processes

Geographic variations of leachable Fe, Mn, Cu, Zn, Co, and Ni in San Francisco Bay sediments indicate that Fe, Mn, Co, and Ni are all predominantly supplied to bay sediments from the San Joaquin-Sacramento River system, with little evidence for direct contributions from municipal and industrial sources. In contrast, both Cu and Zn have significant sources within the Bay system, probably municipal and industrial discharges. Precipitation and coagulation of Fe oxides in the low-salinity region of the estuary results in significantly greater concentrations of that element in the most landward portion of the estuary. Co and Ni appear to be actively coprecipitating with Fe but their distributions are also influenced by other factors. Mn is not a major geochemical agent in this system. Its pattern is different from the other elements and it does not account for any of the other elemental variance. The behavior of Cu and Zn is affected not only by the presence of nonriverine sources but also through surface-active processes and organic complexing, coupled with the transportation of fine-grained sediment.