Managing by principle: A critical analysis of the European principles of Integrated Coastal Zone Management (ICZM)

A set of eight principles is contained in the European Recommendation on Integrated Coastal Zone Management. The principles have been adopted with the minimum of critical review. The six core principles form two groups, one concerned with strategic goals and one that has a local focus. The principles are presented as a menu of free-standing options, with no prioritization either within or between groups. This can produce irreconcilable differences in strategy. The principles require clarification, prioritization of the strategic principles and recognition that they are an indivisible integrated set which should not be used to select principles to advance a particular agenda.     

Growing up green on serpentine soils: Biogeochemistry of serpentine vegetation in the Central Coast Range of California

Serpentine soils derived from the weathering of ultramafic rocks and their metamorphic derivatives (serpentinites) are chemically prohibitive for vegetative growth. Evaluating how serpentine vegetation is able to persist under these chemical conditions is difficult to ascertain due to the numerous factors (climate, relief, time, water availability, etc.) controlling and affecting plant growth. Here, the uptake, incorporation, and distribution of a wide variety of elements into the biomass of serpentine vegetation has been investigated relative to vegetation growing on an adjacent chert-derived soil. Soil pH, electrical conductivity, organic C, total N, soil extractable elements, total soil elemental compositions and plant digestions in conjunction with spider diagrams are utilized to determine the chemical relationships of these soil and plant systems. Plant available Mg and Ca in serpentine soils exceed values assessed in chert soils. Magnesium is nearly 3 times more abundant than Ca in the serpentine soils; however, the serpentine soils are not Ca deficient with Ca concentrations as high as 2235 mg kg⁻¹. Calcium to Mg ratios (Ca:Mg) in both serpentine and chert vegetation are greater than one in both below and above ground tissues. Soil and plant chemistry analyses support that Ca is not a limiting factor for plant growth and that serpentine vegetation is actively moderating Mg uptake as well as tolerating elevated concentrations of bioavailable Mg. Additionally, results demonstrate that serpentine vegetation suppresses the uptake of Fe, Cr, Ni, Mn and Co into its biomass. The suppressed uptake of these metals mainly occurs in the plants’ roots as evident by the comparatively lower metal concentrations present in above ground tissues (twigs, leaves and shoots). This research supports earlier studies that have suggested that ion uptake discrimination and ion suppression in the roots are major mechanisms for serpentine vegetation to tolerate the chemistry of serpentine soils.     

A chemostratigraphic method to determine the end of impact‐related sedimentation at marine‐target impact craters (Chesapeake Bay,Lockne, Tvären)

Abstract– To better understand the impact cratering process and its environmental consequences at the local to global scale, it is important to know when in the geological record of an impact crater the impact‐related processes cease. In many instances, this occurs with the end of early crater modification, leaving an obvious sedimentological boundary between impactites and secular sediments. However, in marine‐target craters the transition from early crater collapse (i.e., water resurge) to postimpact sedimentation can appear gradual. With the a priori assumption that the reworked target materials of the resurge deposits have a different chemical composition to the secular sediments we use chemostratigraphy (δ¹³C_carb, %C_org, major elements) of sediments from the Chesapeake Bay, Lockne, and Tvären craters, to define this boundary. We show that the end of impact‐related sedimentation in these cases is fairly rapid, and does not necessarily coincide with a visual boundary (e.g., grain size shift). Therefore, in some cases, the boundary is more precisely determined by chemostratigraphy, especially carbonate carbon isotope variations, rather than by visual inspection. It is also shown how chemostratigraphy can confirm the age of marine‐target craters that were previously determined by biostratigraphy; by comparing postimpact carbon isotope trends with established regional trends.     

Late Pleistocene stratigraphy and sedimentary environments of the Severnaya Dvina‐Vychegda region in northwestern Russia

The Late Pleistocene stratigraphy from the Severnaya Dvina‐Vychegda region of northwestern Russia is revised based on investigations of new localities, revisiting earlier localities, introduction of about 110 new OSL dates and burial depth corrections of earlier published OSL dates, in addition to six new radiocarbon dates. Most of the OSL samples studied here are from fluvial and subaquaeous sediments, which we found to be well bleached. Six chronostratigraphical units and their sedimentary environment are described, with the oldest unit consisting of pre‐Eemian glacial beds. For the first time, Early Weichselian sediments are documented from the region and a fluvial environment with some vegetation and permafrost conditions is suggested to have persisted from the end of the Eemian until at least about 92 ka ago. The period in which a Middle Weichselian White Sea Lake could have existed is constrained to 67?62 ka, but as the lake level never reached the thresholds of the drainage basin, the lake probably existed only for a short interval within this time‐span. Blocking and reversal of fluvial drainage started again around 21?20 ka ago when the Fennoscandian Ice Sheet advanced into the area, reaching its maximum 17?15 ka ago. At that time, an ice‐dammed lake reached its maximum water level, which was around 135 m above present sea level. Drainage of the lake started shortly after 15 ka ago, and the lake was emptied within 700 years. Severe periglacial conditions, with permafrost and aeolian activity, prevailed in the area until about 10.7 ka.     

Landslide susceptibility and hazard mapping in Australia for land-use planning — with reference to challenges in metropolitan suburbia

This paper provides an overview of the history and current status of landslide susceptibility and hazard mapping for land-use zoning in Australia. It also describes a case study of landslide hazard mapping in a medium density, coastal, suburban residential area of metropolitan Sydney, New South Wales, Australia, with relatively steep terrain. Issues covered include identification and mapping of existing and potential landslides, and susceptibility and hazard zoning for regulatory management and land-use planning. The method involves application of the principles contained within the AGS (2000) guideline, and as updated by the AGS (2007 a,b,c,d,e) suite of guidelines.     

Streambank dewatering for increased stability

Streambank erosion is often the dominant source of sediment leaving modified watersheds. Mass failure of high, steep banks is one of the most serious forms of streambank erosion. The risk of a given bank experiencing mass failure is a function of bank height, angle, and soil strength, which is governed by soil moisture. Two methods for bank dewatering were tested in adjacent sections of streambank bordering a deeply incised channel in northern Mississippi: a low‐cost pump system and subsurface horizontal drains. Pore water pressures (both positive and negative pressures, or matric suction) were continuously monitored for 2 years at the pumped site, at an adjacent untreated control section, and for 1 year at the site stabilized with horizontal drains. Resulting data were used to calculate a time series of the factor of safety using a computer model. Over the course of two wet seasons, average bank retreats for the control and pumped plots were 0·43 and 0·21 m, respectively. More limited monitoring revealed that the site with passive drains retreated about 0·23 m. At the pumped site pore water pressure was 3–4 kPa lower than at the control site during the most critical periods. Accordingly, computed factors of safety were above the failure threshold at the pumped site, but fell below unity at the control site on 11 occasions over the period of observation. Similarly, the drained site displayed generally lower pore water pressure and higher safety factors except for two events when drains were evidently overwhelmed with the volume of local surface and subsurface flows. These results suggest, but do not prove, that bank dewatering promoted lower rates of bank retreat and higher levels of stability since the three sites had slight differences in soils, geometry and boundary conditions. Initial cost of the dewatering treatments were significantly less than orthodox bank stabilization measures, but operation and maintenance requirements may be greater. Published in 2009 by John Wiley & Sons, Ltd.     

Variations of the neutralino elastic cross-section with CP-violating phases

We analyze the neutralino–nucleus elastic cross-section in the minimal supersymmetric extension of the standard model (MSSM), including contributions from CP-violating phases, using the four-fermi neutralino–quark interaction. Over a wide range of the MSSM parameter space, we show the variations in the cross-sections due to these phases. We further concentrate on the regions which are consistent with constraints from the electric dipole moment of the electron, neutron and mercury atom. In the regions we examine in detail, we find suppressions by up to a factor of two, while enhancements in the cross-sections are no greater than 10%.     

Venus cloud microphysics

Because sulfuric acid does not wet sulfur, composite drops in the atmosphere of Venus cannot have sulfur “cores,” but must instead have sulfur coats. Both components then communicate with the vapor phase. Drops that are fully coated with sulfur are immune to coalescence; this sets a limit to growth that may explain “Mode 3” particles. The sulfur coating is probably responsible for the anomalously low refractive indices derived from entry-probe nephelometer data. There appears to be about an order of magnitude less elemental sulfur than sulfuric acid in the clouds.     

Time-dependent flexure of the lithospheres on the icy satellites of Jupiter and Saturn

Previous analyses into flexural deformation on the icy satellites of Jupiter and Saturn have assumed static, elastic lithospheres. Viscous creep within the lithosphere, however, can cause evolution over time. Here, we apply a finite-element model that employs a time-dependent elastic–viscous-plastic rheology in order to investigate flexure on icy satellites. Factors that affect this time-dependent response are those that control creep rates; surface temperature, heat flow, and grain size. Our results show that surface temperature is by far the dominant factor. At higher surface temperatures (100–130 K), the evolution of the deformation is such that the thickness of a modeled elastic lithosphere could vary by up to an order of magnitude, depending on the time scale over which the deformation occurred. Because the flexure observed on icy satellites generally indicates transient high heat flow events, our results indicate that the duration of the heat pulse is an important factor. For the icy worlds of Jupiter and Saturn, static models of lithospheric flexure should be used with caution.     

Constraints on Mercury’s Na exosphere: Combined MESSENGER and ground-based data

We have used observations of sodium emission obtained with the McMath-Pierce solar telescope and MESSENGER’s Mercury Atmospheric and Surface Composition Spectrometer (MASCS) to constrain models of Mercury’s sodium exosphere. The distribution of sodium in Mercury’s exosphere during the period January 12-15, 2008, was mapped using the McMath-Pierce solar telescope with the 5″ × 5″ image slicer to observe the D-line emission. On January 14, 2008, the Ultraviolet and Visible Spectrometer (UVVS) channel on MASCS sampled the sodium in Mercury’s anti-sunward tail region. We find that the bound exosphere has an equivalent temperature of 900-1200 K, and that this temperature can be achieved if the sodium is ejected either by photon-stimulated desorption (PSD) with a 1200 K Maxwellian velocity distribution, or by thermal accommodation of a hotter source. We were not able to discriminate between the two assumed velocity distributions of the ejected particles for the PSD, but the velocity distributions require different values of the thermal accommodation coefficient and result in different upper limits on impact vaporization. We were able to place a strong constraint on the impact vaporization rate that results in the release of neutral Na atoms with an upper limit of 2.1 × 10⁶ cm⁻² s⁻¹. The variability of the week-long ground-based observations can be explained by variations in the sources, including both PSD and ion-enhanced PSD, as well as possible temporal enhancements in meteoroid vaporization. Knowledge of both dayside and anti-sunward tail morphologies and radiances are necessary to correctly deduce the exospheric source rates, processes, velocity distribution, and surface interaction.