Investigating sediments and rock structures beneath a river using underwater ERT

This article presents hydrogeophysical investigations performed in a well-developed, long-term hydrogeological gypsum karst research site where subsurface evaporite dissolution has led to the subsidence of a river dam and an adjacent highway; both constructed on gypsum-containing rock, southeast of Basel, Switzerland. An observation system was set up to improve the protection of surface and subsurface water resources during remedial construction measures of the highway and in order to understand the processes, as well as the temporal evolution, of rock water interaction (flow and dissolution). However, no detailed hydrogeological information beneath the river could be derived from the previous investigations. To supplement the basic knowledge on this area, underwater Electrical Resistivity Tomography (ERT) measurements were conducted in the river bed upstream of the dam. The ERT-data are interpreted together with drill-core information and a conceptual 3D-Model of the area behind the dam and beneath the river. Results help to delineate weathered zones, associated faults and the thickness of sediment deposits behind the dam, as well as to locate voids within the local karst system. The combination of the ERT and modeling allows the optimization of future site-specific remedial construction measures.     

Feasibility of pre-earthquake strengthening of buildings based on cost-benefit and life-cycle cost analysis, with the aid of fragility curves

There are two fundamental questions this article aims to deal with. First, whether a pre-earthquake strengthening of a large and heterogeneous building stock (the emphasis here is on building types common in S. Europe), is economically feasible or not, and second what is the optimal retrofit level for mitigating the seismic risk. To this purpose contemporary decision making tools, namely cost-benefit and life-cycle cost analyses, are tailored to the needs of the present study, and implemented with the aid of an ad-hoc developed new software application (COBE06). A method for estimating the reduction in structural vulnerability due to retrofit is proposed, as well as a methodology to determine the optimum retrofit level using the fragility curve approach. Finally, the proposed methodology is used in a pilot application that concerns the city of Thessaloniki, and results are drawn for the feasibility of strengthening the reinforced concrete building stock in this city.     

Phase relations of phlogopite with magnesite from 4 to 8 GPa

To evaluate the stability of phlogopite in the presence of carbonate in the Earth’s mantle, we conducted a series of experiments in the KMAS–H₂O–CO₂ system. A mixture consisting of synthetic phlogopite (phl) and natural magnesite (mag) was prepared (phl₉₀-mag₁₀; wt%) and run at pressures from 4 to 8 GPa at temperatures ranging from 1,150 to 1,550°C. We bracketed the solidus between 1,200 and 1,250°C at pressures of 4, 5 and 6 GPa and between 1,150 and 1,200°C at a pressure of 7 GPa. Below the solidus, phlogopite coexists with magnesite, pyrope and a fluid. At the solidus, magnesite is the first phase to react out, and enstatite and olivine appear. Phlogopite melts over a temperature range of ~150°C. The amount of garnet increases above solidus from ~10 to ~30 modal% to higher pressures and temperatures. A dramatic change in the composition of quench phlogopite is observed with increasing pressure from similar to primary phlogopite at 4 GPa to hypersilicic at pressures ≥5 GPa. Relative to CO₂-free systems, the solidus is lowered such, that, if carbonation reactions and phlogopite metasomatism take place above a subducting slab in a very hot (Cascadia-type) subduction environment, phlogopite will melt at a pressure of ~7.5 GPa. In a cold (40 mWm⁻²) subcontinental lithospheric mantle, phlogopite is stable to a depth of 200 km in the presence of carbonate and can coexist with a fluid that becomes Si-rich with increasing pressure. Ascending kimberlitic melts that are produced at greater depths could react with peridotite at the base of the subcontinental lithospheric mantle, crystallizing phlogopite and carbonate at a depth of 180–200 km.     

Tektonische Beulen im Watteneis vor Büsum

Zusammenfassung In der vorliegenden Arbeit werden Aufwölbungen im Eis der Wattenküste vor Büsum mit den von H. Cloos beschriebenen Beulen in der Erdoberfläche verglichen. Beide entstehen durch vertikalen Druck von unten ohne Sehnenverkürzung, in deren Folge sich Spalten im Scheitel der Gewölbe bilden. Die völlige übereinstimmung in Form und Entstehung beider Erscheinungen lä\t die Watteisbeulen als geeignetes Beispiel erscheinen, um den Werdegang der Gro\formen zu verfolgen. Die kurze Notiz von H. Cloos über einen Scheitelgraben im Eise (1948) erschien erst nach Abschlu\ dieses Aufsatzes.     

Meteoric fluid‐rock interaction in Variscan shear zones

Variscan shear zones in the Armorican Massif represent sites of strong fluid‐rock interaction. The hydrogen isotope composition of muscovite (δD_Ms) from syntectonic leucogranite allows to determine the source of fluids that infiltrated the footwall of three detachment zones and the South Armorican Shear Zone. Using temperatures of hydrogen isotope exchange estimated from microstructural data, we calculate the hydrogen isotope ratios of water (δD_water) present within the shear zones during high‐temperature deformation. A ~40‰ difference in δD_water values from deep to shallow crustal level reveals a mixing relationship between deep crustal fluids with higher δD values that range from ?34 to ?33‰, and meteoric fluids with δD values as low as ?74‰ in the upper part of detachment footwalls.     

Partitioning of Ca and Al between forsterite and silicate melt in dynamic systems with implications for the origin of Ca,Al‐rich forsterites in primitive meteorites

Abstract— We report the results of dynamic crystallization experiments that were specifically designed to study the dependence of Ca and Al partitioning between forsterite and melt in rapidly cooling Caand Al‐rich melts. The partitioning of Ca between olivine and silicate melt is found to be independent of the cooling rate within the range of 1.5 to 1000°C/hr and at CaO contents of up to 25 wt%. Within analytical uncertainty, our data plot on the equilibrium partitioning curve obtained by Libourel (1999). The partitioning behavior of Al at high cooling rates is more complex. Aluminum is much more heterogenously distributed in the olivine and the co‐existing melt than Ca. But, no systematic trend of Al partition coefficient with cooling rate is observed. We apply the results of the experiments to the formation of meteoritic forsterites with relatively high contents of Ca and Al. Although these forsterites are found frequently inside chondrules, the Ca contents of their host chondrules are far too low to crystallize these high Ca‐forsterites. This is also true for very rapid cooling of chondrule melts. The parental melt of these forsterites requires CaO contents above 20 wt%.     

Reliability checking for GNSS baseline and network processing

Reliability analysis is inseparably connected with the formulation of failure scenarios, and common test statistics are based on specific assumptions. This is easily overlooked when processing observation differences. Poor failure identification performance and misleading pre-analysis results, mainly meaningless minimum detectable biases and external reliability measures, are the consequence. A reasonable failure scenario for use with differenced GNSS observations is formulated which takes into account that individual outliers in the original data affect more than one processed observation. The proper test statistics and reliability indicators are given for use with correlated observations and both batch processing and Kalman filtering. It is also shown that standardized residuals and redundancy numbers fail completely when used with double differenced observations.

Palynology of Triassic–Jurassic boundary sections in northern Switzerland

A first palynostratigraphic scheme of Upper Triassic deposits in northern Switzerland was established based on spore-pollen associations and dinoflagellate cyst records from the upper part of the Upper Triassic Klettgau Formation and the lower part of the Lower Jurassic Staffelegg Formation. Drill cores from the Adlerberg region (Basel Tabular Jura) and from Weiach (northern part of Canton Zurich) as well as from an outcrop at the Chilchzimmersattel (Basel Folded Jura) were studied and five informal palynological associations are distinguished. These palynological associations correlate with palynological association of the Central European Epicontinental Basin and the Tethyan realm and provide a stratigraphic framework for the uppermost Triassic sediments in northern Switzerland. Throughout the uppermost Triassic to Jurassic palynological succession a remarkable prominence of Classopollis spp. is observed. Besides Classopollis spp. the three Rhaetian palynological associations A to C from the Upper Triassic Belchen Member include typical Rhaetian spore-pollen and dinoflagellate taxa (e.g., Rhaetipollis germanicus, Geopollis zwolinskae, Rhaetogonyaulax rhaetica, and Dapcodinium priscum). Association B differs from association A in a higher relative abundance of the sporomorph taxa Perinopollenites spp. and the consistent occurrence of Granuloperculatipollis rudis and Ricciisporites tuberculatus. Spore diversity is highest in the late Rhaetian palynological association C and includes Polypodiisporites polymicroforatus. A Rhaetian age for the Belchen Member is confirmed by palynological associations A–C, but there is no record of the latest Rhaetian and the earliest Jurassic. In contrast to the Rhaetian palynological associations the Early Jurassic associations W and D include Pinuspollenites spp., Trachysporites fuscus (in association W), and Ischyosporites variegatus. In the view of the end-Triassic mass extinction and contemporaneous environmental changes the described palynofloral succession represents the pre-extinction phase (associations A and B) including a distinct transgression, the extinction phase (association C) associated with a regression, and the post-extinction phase (association W).     

Origin of chondritic forsterite grains

Iron-poor and refractory lithophile element (RLE) rich forsterite grains occur in all major types of unequilibrated chondrites. In our laser ablation inductively coupled mass spectrometry (LA-ICPMS) minor and trace element study we show that refractory forsterites (RF) from carbonaceous (CC), unequilibrated ordinary (UOC) and a Rumuruti chondrite (RC) have similar chemical compositions with high RLE concentrations and low concentrations of Mn, Fe, Co and Ni. Fractionation of RLEs and rare earth elements (REEs) is in agreement with formation by crystallization from a RLE rich silicate melt. Low concentrations and the fractionation of moderately siderophile elements (Fe, Co, Ni) in RFs suggests formation at low oxygen fugacity, possibly in equilibrium with primitive Fe,Ni metal condensates in a gas of solar composition. Anomalously high Ti in the parental melt can be explained by Ti³⁺/Ti⁴⁺ ∼1.5, supporting formation of RF in highly reducing conditions. Low Mn concentrations indicate formation at high temperatures (>∼1160 K). The model of formation of RFs and the accompanying physico-chemical conditions during their formation as well as their relation to non refractory olivine are discussed.