Dam-break Modeling in Alpine Valleys

Dam-break analysis is of great importance in mountain environment,especially where reservoirs are located upstream of densely populated areas and hydraulic hazard should be assessed for land planning purposes.Accordingly,there is a need to identify suitable operative tools which may differ from the ones used in flat flood-prone areas.This paper shows the results provided by a 1D and a 2D model based on the Shallow Water Equations（SWE） for dam-break wave propagation in alpine regions.The 1D model takes advantage of a topographic toolkit that includes an algorithm for pre-processing the Digital Elevation Model（DEM） and of a novel criterion for the automatic cross-section space refinement.The 2D model is FLO-2D,a commercial software widely used for flood routing in mountain areas.In order to verify the predictive effectiveness of these numerical models,the test case of the Cancano dam-break has been recovered from the historical study of De Marchi（1945）,which provides a unique laboratory data set concerning the consequences of the potential collapse of the former Cancano dam（Northern Italy）.The measured discharge hydrograph at the dam also provides the data to test a simplified method recently proposed for the characterization of the hydrograph following a sudden dam-break.     

Large wood load fluctuations in an Andean basin

The importance of monitoring and analysing wood fluxes in mountain environments is widely recognized. However, there is a lack of information related to the long-term fluctuations in wood load and associated to the changes in large wood (LW) characteristics. The main aims of the research were to analyse (i) changes in wood characteristics, (ii) fluctuations in wood load, and (iii) the relationship between wood load and sub-reach settings, proposing an ad hoc roughness index (RI). Repeated field surveys to measure wood load and LW characteristics during a 13-year period were conducted within a 2.2 km-long reach of the Rio Toro (Chile), which flows through the Malleco Forest National Reserve that was affected by wildfires in 2002 and 2015. Two spatial scales (i.e. study reach and sub-reach) were considered. Irrespective of the adopted scale wood load fluctuated considerably, in both number and volume, with significant changes in LW characteristics (i.e. mean diameter and length). Moreover, a clear tendency to the aggregation in wood jams (WJs) was observed within the entire study reach. Based on our results, we conclude that 17 years after the first wildfire wood recruitment has started in the upper parts of the basin. Moreover, Generalized Linear Mixed Models (GLMM) analyses were carried out to investigate the relationship between RI and both number and volume of LW. Both models are characterized by high adjusted R² of 74.9% and 72.8% for volume and number, respectively. This demonstrated that the RI can characterize the reaches in terms of tendency to deposition and trapping of wood. These results are promising, particularly in improving the knowledge related to potential deposition areas that can control wood load fluctuations, also permitting its management to be improved. © 2020 John Wiley & Sons, Ltd.     

Vesta's mineralogical composition as revealed by the visible and infrared spectrometer on Dawn

The Dawn spacecraft mission has provided extensive new and detailed data on Vesta that confirm and strengthen the Vesta–howardite–eucrite–diogenite (HED) meteorite link and the concept that Vesta is differentiated, as derived from earlier telescopic observations. Here, we present results derived by newly calibrated spectra of Vesta. The comparison between data from the Dawn imaging spectrometer—VIR—and the different class of HED meteorites shows that average spectrum of Vesta resembles howardite spectra. Nevertheless, the Vesta spectra at high spatial resolution reveal variations in the distribution of HED‐like mineralogies on the asteroid. The data have been used to derive HED distribution on Vesta, reported in Ammannito et al. (2013), and to compute the average Vestan spectra of the different HED lithologies, reported here. The spectra indicate that, not only are all the different HED lithologies present on Vesta, but also carbonaceous chondritic material, which constitutes the most abundant inclusion type found in howardites, is widespread. However, the hydration feature used to identify carbonaceous chondrite material varies significantly on Vesta, revealing different band shapes. The characteristic of these hydration features cannot be explained solely by infalling of carbonaceous chondrite meteorites and other possible origins must be considered. The relative proportion of HEDs on Vesta's surface is computed, and results show that most of the vestan surface is compatible with eucrite‐rich howardites and/or cumulate or polymict eucrites. A very small percentage of surface is covered by diogenite, and basaltic eucrite terrains are relatively few compared with the abundance of basaltic eucrites in the HED suite. The largest abundance of diogenitic material is found in the Rheasilvia region, a deep basin, where it clearly occurs below a basaltic upper crust. However, diogenite is also found elsewhere; although the depth to diogenite is consistent with one magma ocean model, its lateral extent is not well constrained.     

Robust resolution of Kepler’s equation in all eccentricity regimes

The singularity for the big bang state can be represented using the generalized anisotropic Friedmann equation, resulting in a system of differential equations in a central force field. We study the regularizability of this singularity as a function of a parameter, the equation of state, w. We prove that for w > 1 it is regularizable only for w satisfying relative prime number conditions, and for w ≤ 1 it can always be regularized. This is done by using a McGehee transformation, usually applied in the three and four-body problems. This transformation blows up the singularity into an invariant manifold. The relationship of this result to other cosmological models is briefly discussed.     

Testing different sorting techniques in macroinvertebrate samples from running waters

With the aim of finding an efficient, standardised and practical protocol for sorting macroinvertebrate samples for water management practice, three different sorting techniques were tested: RIVPACS sorting, a modified AQEM/STAR (MAS) sorting protocol and a Live-sorting method. Based on the same AQEM/STAR sample to ensure comparable results, we compared RIVPACS and MAS sorting for 20 samples, and Live-sorting and MAS for a different set of 20 samples. Comparisons were based on both ecological and financial parameters relevant for the implementation of the EU Water Framework Directive in Germany. Parameters include recently developed multimetric assessment indices, their stream type specific core metric results, time effort and costs. While RIVPACS and MAS sorting produced similar results in terms of ecological assessment, time effort and costs, Live-sorting differed notably in all three respects. Live-sorting is the quickest and least expensive protocol, but shows higher variability than the other protocols. We discuss the differences and the level of standardisation for each of these methods.     

Air and water entrapment in the vicinity of the water table

A laboratory tank was used to study entrapment of water in coarse sand lenses above the water table and of air in coarse sand lenses below the water table. Monitoring of these experiments involved a combination of visual inspection, measurement of moisture content, and measurement of air/water pressure. The medium consisted of coarse sand lenses with various degrees of vertical connectivity embedded within a fine sand matrix. Experiments were performed under conditions of both drainage (from a fully saturated medium) and imbibition. Observations during drainage included: (1) water was trapped in the coarse sand zones above the water table at heights significantly greater than anticipated from consideration of capillary rise in the coarse sand; (2) rapid drainage of these same coarse zones occurred when air penetrated into these zones through the surrounding fine sands; and (3) prior to the time of penetration of the coarse sand by air, water pressure in the coarse zone dropped significantly below atmospheric pressure. Observations during imbibition included: (1) entrapment of air within coarse sands below the water table, (2) the pore fluids in these zones varied spatially from predominantly air to predominantly water, and (3) pressure in the trapped air phase was significantly greater than pressure in the water phase in the surrounding fine sand. Overall, these results demonstrated significant sensitivity to the geometry of the coarse sand inclusions, particularly the vertical connectivity of the coarse sand lens.     

The volcano-tectonic evolution of Concepción,Nicaragua

We describe the evolution of Concepción volcano by integrating regional geology, eruptive activity, morphology, stratigraphy, petrology, structure and active deformation data. This Nicaraguan volcano is set close to the back limb of the northwest-trending Tertiary Rivas anticline, a regional structure that bounds the southwest side of Lake Nicaragua. Concepción rises 1,600 m above a 1-km-thick sequence of Quaternary lacustrine mud-stones. There is no record of volcanism in the lake prior to Concepción. In addition, the only nearby volcano, Maderas volcano, has not deposited material on Concepción because of the trade winds. Thus, Concepción (and Made ras, too) can be considered as pristine volcanic environments, unaffected by other centres. A topographic rise forms an annulus 20 km in diameter around the cone. The rise is created by thrust-related folds at the western base, where the trade winds have accumulated a thick sequence of tephra, and by mud diapirs at the eastern base where only lake mudstones are present. Four magmatic-eruptive episodes exist in the stratigraphic record. The first begins with primitive low-alumina basalt and subsequently evolves to dacitic compositions. The following three episodes begin with high-alumina basalts and evolve only to silicic andesites. The occurrence of the high-alumina basalt after the first episode is indicative of crystal fractionation at lower crustal depths. The first episode may be associated with a compressive phase of volcano evolution. In this phase, the edifice load compresses substrata, allowing a longer magma residence time and differentiation in a shallow reservoir (possibly located at the density contrast between the lake sediments and the Tertiary flysch). During the next three episodes the weak sediments below the volcano started to rupture and yield under its increasing load, beginning a thrusting/diapiring phase of volcano evolution. Because of outward thrusting, vertical and horizontal stresses above the chamber were reduced, allowing magma to erupt more easily and to reach a lesser degree of evolution. If we consider the future evolution of Concepción, the differentiation in the shallow reservoir has probably generated a cumulitic complex, which eventually will start to deform and spread, beginning another, this time plutonic, spreading phase. This phase, which may be beginning now, could allow less evolved magmas to be erupted again. Four components influence the phases of volcano evolution: (1) the regional geology that is the boundary condition of the environment, (2) the substrata rheology that controls deformation, (3) the load of the volcanic edifice and (4) the magma, which provides the input of mass and energy. Our model of volcanic evolution suggests that Concepción is a complex geologic environment. The volcanic activity, tectonics and hazards can only be constrained through a complete knowledge of the many components of this environment. Published online: 20 February 2003 Editorial responsibility: R. Cioni     

Paleogeography of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene

Twenty paleogeographic maps are presented for Middle Eocene (Lutetian) to Late Pliocene times according to the stratigraphical data given in the companion paper by Berger et al. this volume. Following a first lacustrine-continental sedimentation during the Middle Eocene, two and locally three Rupelian transgressive events were identified with the first corresponding with the Early Rupelian Middle Pechelbronn beds and the second and third with the Late Rupelian Serie Grise (Fischschiefer and equivalents). During the Early Rupelian (Middle Pechelbronn beds), a connection between North Sea and URG is clearly demonstrated, but a general connection between North Sea, URG and Paratethys, via the Alpine sea, is proposed, but not proved, during the late Rupelian. Whereas in the southern URG, a major hiatus spans Early Aquitanian to Pliocene times, Early and Middle Miocene marine, brackish and freshwater facies occur in the northern URG and in the Molasse Basin (OMM, OSM); however, no marine connections between these basins could be demonstrated during this time. After the deposition of the molasse series, a very complex drainage pattern developed during the Late Miocene and Pliocene, with a clear connection to the Bresse Graben during the Piacenzian (Sundgau gravels). During the Late Miocene, Pliocene and Quaternary sedimentation persisted in the northern URG with hardly any interruptions. The present drainage pattern of the Rhine river (from Alpine area to the lower Rhine Embayment) was not established before the Early Pleistocene.     

River discharge controls phytoplankton dynamics in the northern San Francisco Bay estuary

Phytoplankton dynamics in the upper reach of the northern San Francisco Bay estuary are usually characterized by low biomass dominated by microflagellates or freshwater diatoms in winter, and high biomass dominated by neritic diatoms in summer. During two successive years of very low river discharge (the drought of 1976-77), the summer diatom bloom was absent. This is consistent with the hypothesis that formation of the diatom population maximum is a consequence of the same physical mechanisms that create local maxima of suspended sediments in partially-mixed estuaries: density-selective retention of particles within an estuarine circulation cell. Because the estuary is turbid, calculated phytoplankton growth rates are small in the central deep channel but are relatively large in lateral shallow embayments where light limination is less severe. When river discharge falls within a critical range (100–350 m³ s^?1) that positions the suspended particulate maximum adjacent to the productive shallow bays, the population of neritic diatoms increases. However, during periods of high discharge (winter) or during periods of very low discharge (drought), the suspended particulate maximum is less well-defined and is uncoupled (positioned downstream or upstream) from the shallow bays of the upper estuary, and the population of neritic diatoms declines. Hence, the biomass and community composition of phytoplankton in this estuary are controlled by river discharge.