The settling behavior and benthic transport of fish feed pellets under steady flows

Settling and erosion experiments were carried out on a size range of fish feed pellets using an annular flume. A strong positive correlation was observed between settling rate and pellet dimension (pellet length, pellet dimeter, and equivalent sedimentation diameter). Erosion thresholds also showed a strong positive correlation with pellet dimensions. Experiments were also carried out to examine the effect of the number of pellets on erosion threshold of two sizes. The results show an asymptotic increase in erosion threshold with increasing number of pellets present, possibly due to sheltering effects. The chemical composition of the pellets was analyzed in terms of water and organic, carbon, and nitrogen contents as well as stable carbon and nitrogen isotopes. The results arising from this study will provide, information regarding potential tracers of waste feed material and help validate model predictions associated with dispersal of waste material.     

Estuarine mud flocculation properties determined using an annular mini-flume and the LabSFLOC system

Most entrained estuarine sediment mass occurs as flocs. Parameterising flocculation has proven difficult as it is a dynamically active process dependent on a set of complex interactions between the sediment, fluid and the flow. However the natural variability in an estuary makes it difficult to study the factors that influence the behaviour of flocculation in a systematic manner. This paper presents preliminary results from a laboratory study that examined how floc properties of a natural estuarine mud from the Medway (UK), evolved in response to varying levels of suspended sediment concentration and induced turbulent shearing. The experiments utilised the LabSFLOC floc video camera system, in combination with an annular mini-flume to shear the suspended sediment slurries. The flows created in the mini-flume produced average shear stresses, at the floc sampling height, ranging from 0.01 N m⁻² to a peak of 1.03 N m⁻². Nominal suspended particulate matter concentrations of 100, 600 and 2000 mg l⁻¹ were introduced into the flume. The experimental runs produced individual flocs ranging in size from microflocs of 22.2 μm to macroflocs 583.7 μm in diameter. Average settling velocities ranged from 0.01 to 26.1 mm s⁻¹, whilst floc effective densities varied from 3.5 up to 2000 kg m⁻³. Low concentration and low shear stress were seen to produce an even distribution of floc mass between the macrofloc (>160 μm) and microfloc (<160 μm) fractions. As both concentration and stress rose, the proportion of macrofloc mass increased, until they represented over 80% of the suspended matter. A maximum average macrofloc settling velocity of 3.3 mm s⁻¹ was attained at a shear stress of 0.45 N m⁻². Peak turbulence conditions resulted in deflocculation, limiting the macrofloc fall velocity to only 1.1 mm s⁻¹ and placing over 60% of the mass in the microfloc size range. A statistical analysis of the data suggests that the combined influence of both suspended concentration and turbulent shear controls the settling velocity of the fragile, low density macroflocs.     

Rotation, planets, and the 'second parameter' of the horizontal branch

We analyse the angular momentum evolution from the red giant branch (RGB) to the horizontal branch (HB) and along the HB. Using rotation velocities for stars in the globular cluster M13, we find that the required angular momentum for the fast rotators is up to 1–3 orders of magnitude (depending on some assumptions) larger than that of the Sun. Planets of masses up to 5 times Jupiter's mass and up to an initial orbital separation of ~2 au are sufficient to spin-up the RGB progenitors of most of these fast rotators. Other stars have been spun-up by brown dwarfs or low-mass main-sequence stars. Our results show that the fast rotating HB stars have been probably spun-up by planets, brown dwarfs or low-mass main-sequence stars while they evolved on the RGB. We argue that the angular momentum considerations presented in this paper further support the 'planet second parameter' model. In this model, the 'second parameter' process, which determines the distribution of stars on the HB, is interaction with low-mass companions, in most cases with gas-giant planets, and in a minority of cases with brown dwarfs or low-mass main-sequence stars. The masses and initial orbital separations of the planets (or brown dwarfs or low-mass main-sequence stars) form a rich spectrum of different physical parameters, which manifests itself in the rich varieties of HB morphologies observed in the different globular clusters.     

Unification of New Zealand’s local vertical datums: iterative gravimetric quasigeoid computations

New Zealand uses 13 separate local vertical datums (LVDs) based on geodetic levelling from 12 different tide-gauges. We describe their unification using a regional gravimetric quasigeoid model and GPS-levelling data on each LVD. A novel application of iterative quasigeoid computation is used, where the LVD offsets computed from earlier models are used to apply additional gravity reductions from each LVD to that model. The solution converges after only three iterations yielding LVD offsets ranging from 0.24 to 0.58 m with an average standard deviation of ±0.08 m. The so-computed LVD offsets agree, within expected data errors, with geodetically levelled height differences at common benchmarks between adjacent LVDs. This shows that iterated quasigeoid models have a role in vertical datum unification.     

Supply limited sediment transport in a high-discharge event of the tropical Burdekin River, North Queensland, Australia

Interactions between catchment variables and sediment transport processes in rivers are complex, and sediment transport behaviour during high‐flow events is not well documented. This paper presents an investigation into sediment transport processes in a short‐duration, high‐discharge event in the Burdekin River, a large sand‐ and gravel‐bed river in the monsoon‐ and cyclone‐influenced, semi‐arid tropics of north Queensland. The Burdekin's discharge is highly variable and strongly seasonal, with a recorded maximum of 40 400 m³ s^?1. Sediment was sampled systematically across an 800 m wide, 12 m deep and straight reach using Helley‐Smith bedload and US P‐61 suspended sediment samplers over 16 days of a 29‐day discharge event in February and March 2000 (peak 11 155 m³ s^?1). About 3·7 × 10⁶ tonnes of suspended sediment and 3 × 10⁵ tonnes of bedload are estimated to have been transported past the sample site during the flow event. The sediment load was predominantly supply limited. Wash load included clay, silt and very fine sand. The concentration of suspended bed material (including very coarse sand) varied with bedload transport rate, discharge and height above the bed. Bedload transport rate and changes in channel shape were greatest several days after peak discharge. Comparison between these data and sparse published data from other events on this river shows that the control on sediment load varies between supply limited and hydraulically limited transport, and that antecedent weather is an important control on suspended sediment concentration. Neither the empirical relationships widely used to estimate suspended sediment concentrations and bedload (e.g. Ackers & White, 1973) nor observations of sediment transport characteristics in ephemeral streams (e.g. Reid & Frostick, 1987) are directly applicable to this river.     

Collisional processes in the eastern Mediterranean

In the eastern Mediterranean the collision of the Erastosthenes and the Anaximander Seamounts with the Cyprus arc results in a unique tectonic setting due to the small size of the eastern Mediterranean basin. As a result of the collision, some of the motion between the African plate and the Eurasian plate is taking place by thrust faulting along the north African passive margin. It seems that the stress at the plate boundary along the Cyprus arc may be transmitted southward to cause the reactivation of a pre-existing fault zone along the passive margin of eastern north Africa.

---

Zusammenfassung Im östlichen Mittelmeerbecken hat die Kollision des Erastosthenes und des Anaximander Seamounts mit dem Cypern-Bogen eine spezielle tektonische Situation geschaffen, die durch den engen Raum dieses Beckens bestimmt wird. Als Ergebnis dieser Kollision erscheinen Überschiebungen der Afrikanischen Platte auf Eurasische Platte entlang des passiven nordafrikanischen Randes. Es erscheint möglich, daß das Streßfeld an der Plattengrenze entlang des Zypernbogens südwärts wirkt und dadurch die alte Störungszone entlang des passiven Kontinentrandes von Nordafrika reaktiert wird.

---

Résumé En Méditerrannée orientale, la collision des guyots Eratosthène et Anaximandre avec l'arc de Chypre a engendré une situation tectonique particulière, due à la faible dimension du bassin est-méditerrannéen. Cette collision a eu pour conséquence la production de charriages de la plaque africaine sur la plaque eurasiatique le long de la marge passive nord-africaine. Il semble que les contraintes règnant au bord de la plaque le long de l'arc de Chypre se soient transmises vers le Sud pour y provoquer la réactivation d'une zône failleuse préexistante le long de la marge passive du NE de l'Afrique.

---

, . . , . . .

     

Response of a mountain‐foreland fluvial system to an advancing ice sheet,southern Poland

In this paper, fluvial deposits of Middle Pleistocene age in the mountain‐foreland area of southern Poland (Eastern Sudetes and Western Carpathians) are studied in order to document the evolution of fluvial systems during the coldest stages of glacial periods when the Scandinavian Ice Sheet advanced far to the south. The focus is on fluvial response to climate change and glacial impact on river system behaviour. Also considered is the tectonic uplift of the mountain part of river catchments and its potential influence on the style of fluvial sedimentation in the fore‐mountain area. Three drainage basins that were active during the Elsterian and Saalian glaciations are investigated. Facies analyses are carried out on thick successions of braided river deposits covered with till or glaciolacustrine sediments, which result in a reconstruction of the fluvial activity synchronous with the ice‐sheet advance. The results suggest that fluvial activity declined prior to ice‐sheet advance into the fore‐mountain area. This climatically induced change is directly recorded in alluvial successions by upward‐decreasing bed thicknesses and grain sizes. River longitudinal profiles were shortened in front of the advancing ice sheet. The base level of the studied rivers, created by the ice‐sheet margin, rose in parallel with glacial advance. As a result, the successive reaches of rivers (degradational, transitional, aggradational) underwent shortening and moved upstream within the catchments. Moreover, tectonically induced local increases of river slopes may have influenced the depositional processes.