A fast response,open path,infrared hygrometer,using a semiconductor source

Investigations were carried out as to the feasibility of using a semiconductor source in the design of a new rapid response, open-path hygrometer. A single-beam instrument was constructed employing an infrared light emitting diode (LED) as a source instead of the usual high energy, wideband filament. The spectral emission envelope encompassed the 1.87 m water absorption band. Electronic modulation and thermoelectrical cooling of the diode eliminated the conventional chopper wheel and stabilized the peak wavelength emission. Path length was 200 mm. Over a water vapour concentration range of 0–16 g m^–3, absorption varied by 2% in a linear fashion. At 10 Hz, the noise level was 0.1 g m^–3 rms. Hygrometer resolution and stability are constrained by the detector noise level, the small source emission in the absorption band and low frequency drift in the optical filter. Despite these problems, the new instrument showed comparable performance characteristics to a commercial Lyman- hygrometer. Latent heat fluxes measured with both instruments and a Kaijo-Denki, 3-D sonic anemometer agreed to within 4% over a range 0–350 W m^–2. Further improvements in performance can be anticipated with advances in detector and LED technology.     

The geography of dual career households: a research agenda and selected evidence from secondary data sources for Britain

"Amongst the key dimensions of population and labour market change in most parts of western Europe and other similar economies in the 1990s are low fertility rates, rising numbers of smaller households, increasing female participation rates, growth in higher level non-manual occupations and the spread of flexible employment patterns. This paper explores how these trends have led to an increase in the number and significance of one particular subgroup: dual career households. An overview from available secondary sources of the geography and socio-economic characteristics of such households in Britain is presented, and directions for possible future research on dual career households are outlined."     

A dipole field model for axisymmetric alfvén waves with finite ionosphere conductivities

An axisymmetric model for approximate solution of the magnetospheric Alfvén wave problem at latitudes above the plasmapause is proposed, in which a realistic dipole geometry is combined with finite anisotropic ionosphere conductivities, thus bringing together various ideas of previous authors. It is confirmed that the axisymmetric toroidal and poloidal modes interact via the ionospheric Hall effect, and an approximate method of solution is suggested using previously derived closed solutions of the uncoupled wave equations.A solution for zero Hall conductivity is obtained, which consists of sets of independent shell oscillations, regardless of the magnitude of the Pedersen conductivity. One set reduces to the classical solutions for infinite Pedersen conductivity, while another predicts a new set of harmonics of a quarter-wave fundamental, with longer eigenperiods than the classical solutions for a given L-shell.     

Carbon isotopic fractionation between CO2 vapour,silicate and carbonate melts: an experimental study to 30 kbar

The carbon isotopic fractionation between CO₂ vapour and sodamelilite (NaCaAlSi₂O₇) melt over a range of pressures and temperatures has been investigated using solid-media piston-cylinder high pressure apparatus. Ag₂C₂O₄ was the source of CO₂ and experimental oxygen fugacity was buffered at hematite-magnetite by the double capsule technique. The abundance and isotopic composition of carbon dissolved in sodamelilite (SM) glass were determined by stepped heating and the ¹³C of coexisting vapour was determined directly by capsule piercing. CO₂ solubility in SM displays a complex behavior with temperature. At pressures up to 10 kbars CO₂ dissolves in SM to form carbonate ion complexes and the solubility data suggest slight negative temperature dependence. Above 20 kbars CO₂ reacts with SM to form immiscible Na-rich silicate and Ca-rich carbonate melts and CO₂ solubility in Na-enriched silicate melt rises with increasing temperature above the liquidus. Measured values for carbon isotopic fractionation between CO₂ vapour and carbonate ions dissoived in sodamelilite melt at 1200°–1400° C and 5–30 kbars average 2.4±0.2, favouring¹³C enrichment in CO₂ vapour. The results are maxima and are independent of pressure and temperature. Similar values of 2 are obtained for the carbon isotopic fractionation between CO₂ vapour and carbonate melts at 1300°–1400° C and 20–30 kbars.     

Meridional characteristics of a Pc 4 micropulsation event in the plasmasphere

An analysis was made of a complex large amplitude Pc 4 micropulsation, of four hours duration around local noon, observed at five ground stations in the United Kingdom (2.4? L ?3.8). The final pulsation waveform was shown to be the results of the superposition of wave packets of different periods. The meridional variation of the amplitude of the different period wavepackets was consistent with their being fundamental “toroidal” field line resonances within the plasmasphere, rotated through 90° in their transmission through the ionosphere in accordance with recent theoretical predictions. Other predicted ionospheric effects, such as the loss of the sense-of-polarization reversal across the amplitude maximum, were apparent in the meridional variation of the polarization characteristics.     

Determination of Area-Averaged Water Vapour Fluxes with Large Aperture and Radio Wave Scintillometers over a Heterogeneous Surface – Flevoland Field Experiment

A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes.     

Pressure effect on Ti- or P-rich accessory mineral saturation in evolved granitic melts with differing K2O/Na2O ratios

The solubility of Ti- and P-rich accessory minerals has been examined as a function of pressure and K₂O/Na₂O ratio in two series of highly evolved silicate systems. These systems correspond to (a) alkaline, varying from alkaline to peralkaline with increasing K₂O/Na₂O ratio; and (b) strongly metaluminous (essentially trondhjemitic at the lowest K₂O/Na₂O ratio) and remaining metaluminous with increasing K₂O/Na₂O ratio (to 3). The experiments were conducted at a fixed temperature of 1000 °C, with water contents varying from 5 wt.% at low pressure (0.5 GPa), increasing through 5–10 wt.% at 1.5–2.5 GPa to 10 wt.% at 3.5 GPa. Pressure was extended outside the normal crustal range, so that the results may also be applied to derivation of hydrous silicic melts from subducted oceanic crust.

For the alkaline composition series, the TiO₂ content of the melt at Ti-rich mineral saturation decreases with increasing pressure but is unchanged with increasing K content (at fixed pressure). The P₂O₅ content of the alkaline melts at apatite saturation increases with increased pressure at 3.5 GPa only, but decreases with increasing K content (and peralkalinity). For the metaluminous composition series (termed as “trondhjemite-based series” (T series)), the TiO₂ content of the melt at Ti-rich mineral saturation decreases with increasing pressure and with increasing K content (at fixed pressure). The P₂O₅ content of the T series melts at apatite saturation is unchanged with increasing pressure, but decreases with increasing K content. The contrasting results for P and Ti saturation levels, as a function of pressure in both compositions, point to contrasting behaviour of Ti and P in the structure of evolved silicate melts. Ti content at Ti-rich mineral saturation is lower in the alkaline compared with the T series at 0.5 GPa, but is similar at higher pressures, whereas P content at apatite saturation is lower in the T series at all pressures studied. The results have application to A-type granite suites that are alkaline to peralkaline, and to I-type metaluminous suites that frequently exhibit differing K₂O/Na₂O ratios from one suite to another.     

Using Spatial Data to Explore Landholder Awareness and Concern about Dryland Salinity

This paper draws upon research in Victoria's Goulburn Broken Catchment exploring landholder responses to dryland salinity. It has been assumed that part of the explanation for limited adoption of recommended practices was that landholders were unaware of the extent of dryland salinity. Socio-economic data from a mail survey was combined in a Geographic Information System (GIS) with other layers, including the location of discharge sites and depth to saline ground water. Comparisons of expert maps and landholder identified salinity sites suggested that landholders in the upper catchment had excellent knowledge of the current extent of salinity on their property. At the same time, the expert maps failed to predict half of the saline-affected sites identified by landholders. It seems that the extensive community education effort undertaken in this region had been successful in raising salinity awareness. Our research also highlighted that most landholders were not concerned about the impacts of dryland salinity and appear to believe they can 'live with salt'. This is an important issue because the small, diffused amounts of salt exported from these properties in the upper catchment are/will have a substantial impact downstream. The research methodology and findings have important policy and management implications, and these are discussed.