Textural and micro-analytical insights into mafic–felsic interactions during the Oruanui eruption,Taupo

Quenched juvenile mafic inclusions (enclaves) are an occasional but informative component in the deposits of large felsic eruptions. Typically, the groundmasses of these inclusions rapidly crystallize as the mafic magma is chilled against a more voluminous, cooler felsic host, providing a physical and chemical record of the nature and timing of mafic–felsic interactions. We examine mafic inclusions of two compositional lineages (tholeiitic and calc-alkaline) from deposits of the 25.4 ka Oruanui eruption (Taupo, New Zealand). 2-D quantitative textural data from analysis of back-scattered electron images reveal a marked diversity in the groundmass textures of the inclusions, including median crystal sizes (amphibole: 14–45 µm; plagioclase: 21–75 µm) and aspect ratios (amphibole: 1.7–4.2; plagioclase: 2.1–4.0), area number densities (amphibole: 122–2660 mm^?2; plagioclase: 117–2990 mm^?2), area fractions (?) of minerals (?_plag?=?23–45%, ?_amph?=?0–28%, ?_cpx?=?0–6%, ?_oxides?=?0.6–5.5%), and the relative abundance of plagioclase and amphibole (?_plag/?_amph?=?1.0–4.6). Textural parameters vary more significantly within, rather than between, the two compositional lineages, and in some cases show marked variations across individual clasts, implying that each inclusion’s cooling history, rather than bulk composition, was the dominant control on textural development. Groundmass mineral compositions are also diverse both within and between inclusions (e.g. plagioclase from An_34–92, with typical intra-clast variability of ~?20 mol%), and do not correlate with bulk chemistry. Diverse groundmass textures and mineral and glass chemistries are inferred to reflect complex interplay of a range of factors including the degree and rate of undercooling, bulk composition, water content and, possibly, intensive variables. Our data are inconsistent with breakup of a crystallizing ponded mafic layer at the base of the Oruanui melt-dominant body, instead implying that each inclusion partially crystallized as a discrete body with a unique cooling history. Extensive ingestion of mush-derived macro-crystals suggests that mechanical breakup of mafic feeder dikes occurred within a transition zone between the mush and melt-dominant magma body. In this zone, the mush lacked yield strength, as has been inferred from field studies of narrow (meters to few tens of meters) mush-melt transition zones preserved in composite intrusions. Evidence for plastic deformation of inclusions during eruption and the abundance of fresh residual glass in inclusions from all eruptive phases suggest that the inclusions formed syn-eruptively, and must have been formed recurrently at multiple stages throughout the eruption.     

Holocene displacement along branch and secondary faults in the San Andreas fault zone, southern California

Detailed geologic mapping of the San Andreas fault zone in Los Angeles County since 1972 has revealed evidence for diverse histories of displacement on branch and secondary faults near Palmdale. The main trace of the San Andreas fault is well defined by a variety of physiographic features. The geologic record supports the concept of many kilometers of lateral displacement on the main trace and on some secondary faults, especially when dealing with pre-Quaternary rocks. However, the distribution of upper Pleistocene rocks along branch and secondary faults suggests a strong vertical component of displacement and, in many locations, Holocene displacement appears to be primarily vertical. The most recent movement on many secondary and some branch faults has been either high-angle (reverse and normal) or thrust. This is in contrast to the abundant evidence for lateral movement seen along the main San Andreas fault. We suggest that this change in the sense of displacement is more common than has been previously recognized.The branch and secondary faults described here have geomorphic features along them that are as fresh as similar features visible along the most recent trace of the San Andreas fault. From this we infer that surface rupture occurred on these faults in 1857, as it did on the main San Andreas fault. Branch faults commonly form “Riedel” and “thrust” shear configurations adjacent to the main San Andreas fault and affect a zone less than a few hundred meters wide. Holocene and upper Pleistocene deposits have been repeatedly offset along faults that also separate contrasting older rocks. Secondary faults are located up to 1500 m on either side of the San Andreas fault and trend subparallel to it. Moreover, our mapping indicates that some portions of these secondary faults appear to have been “inactive” throughout much of Quaternary time, even though Holocene and upper Pleistocene deposits have been repeatedly offset along other parts of these same faults. For example, near 37th Street E. and Barrel Springs Road, a limited stretch of the Nadeau fault has a very fresh normal scarp, in one place as much as 3 m high, which breaks upper Pleistocene or Holocene deposits. This scarp has two bevelled surfaces, the upper surface sloping significantly less than the lower, suggesting at least two periods of recent movement. Other exposures along this fault show undisturbed Quaternary deposits overlying the fault. The Cemetery and Little Rock faults also exhibit selected reactivation of isolated segments separated by “inactive” stretches.Activity on branch and secondary faults, as outlined above, is presumed to be the result of sympathetic movement on limited segments of older faults in response to major movement on the San Andreas fault. The recognition that Holocene activity is possible on faults where much of the evidence suggests prolonged inactivity emphasizes the need for regional, as well as detailed site studies to evaluate adequately the hazard of any fault trace in a major fault zone. Similar problems may be encountered when geodetic or other studies, Which depend on stable sites, are conducted in the vicinity of major faults.     

A spatially resolved 'inside-out' outburst of IP Pegasi

We present a comprehensive photometric data set taken over the entire outburst of the eclipsing dwarf nova IP Peg in 1997 September/October. Analysis of the light curves taken over the long rise to the peak-of-outburst shows conclusively that the outburst started near the centre of the disc and moved outwards. This is the first data set that spatially resolves such an outburst. The data set is consistent with the idea that long rise times are indicative of such 'inside-out' outbursts. We show how the thickness and the radius of the disc, along with the mass transfer rate, change over the whole outburst. In addition, we show evidence of the secondary and the irradiation thereof. We discuss the possibility of spiral shocks in the disc; however, we find no conclusive evidence of their existence in this data set.     

Isolation of protein from Chlorella sorokiniana CY1 using liquid biphasic flotation assisted with sonication through sugaring-out effect

Microalgae, a sustainable source of multi beneficial components has been discovered and could be utilised in pharmaceutical, bioenergy and food applications. This study aims to investigate the sugaring-out effect on the recovery of protein from wet green microalga, Chlorella sorokiniana CY1 which was assisted with sonication. A comparison of monosaccharides and disaccharides as one of the phaseforming constituents shows that the monosaccharides, glucose was the most suitable sugar in forming the phases with acetonitrile to enhance the production of protein(52% of protein). The protein productivity of microalgae was found to be significantly influenced by the volume ratio of both phases, as the yield of protein increased to 77%. The interval time between the sonication as well as the sonication modes were influencing the protein productivity as well. The optimum protein productivity was obtained with 10 s of resting time in between sonication. Pulse mode of sonication was suitable to break down the cell wall of microalgae compared to continuous mode as a lower protein yield was obtained with the application of continuous mode. The optimum condition for protein extraction were found as followed: 200 g/L glucose as bottom phase with volume ratio of I:1.25, 10 s of resting time for ultrasonication, 5 s of ultrasonication in pulse mode and 0.25 g of biomass weight. The high yield of protein about 81% could be obtained from microalgae which demonstrates the potential of this source and expected to play an important role in the future.     

Experimental petrology of the basaltic shergottite Yamato‐980459: Implications for the thermal structure of the Martian mantle

Abstract— The Martian meteorite Yamato (Y‐) 980459 is an olivine‐phyric shergottite. It has a very primitive character and may be a primary melt of the Martian mantle. We have conducted crystallization experiments on a synthetic Y‐980459 composition at Martian upper mantle conditions in order to test the primary mantle melt hypothesis. Results of these experiments indicate that the cores of the olivine megacrysts in Y‐980459 are in equilibrium with a melt of bulk rock composition, suggesting that these megacrysts are in fact phenocrysts that grew from a magma of the bulk rock composition. Multiple saturation of the melt with olivine and a low‐calcium pyroxene occurs at approximately 12 ± 0.5 kbar and 1540 ± 10°C, suggesting that the meteorite represents a primary melt that separated from its mantle source at a depth of ?100 km. Several lines of evidence suggest that the Y‐980459 source underwent extensive melting prior to and/or during the magmatic event that produced the Y‐980459 parent magma. When factored into convective models of the Martian interior, the high temperature indicated for the upper Martian mantle and possibly high melt fraction for the Y‐980459 magmatic event suggests a significantly higher temperature at the core‐mantle boundary than previously estimated.     

Geostatistics and Bayesian updating for transmissivity estimation in a multiaquifer system in Manitoba,Canada

In ground water flow and transport modeling, the heterogeneous nature of porous media has a considerable effect on the resulting flow and solute transport. Some method of generating the heterogeneous field from a limited dataset of uncertain measurements is required. Bayesian updating is one method that interpolates from an uncertain dataset using the statistics of the underlying probability distribution function. In this paper, Bayesian updating was used to determine the heterogeneous natural log transmissivity field for a carbonate and a sandstone aquifer in southern Manitoba. It was determined that the transmissivity in m²/sec followed a natural log normal distribution for both aquifers with a mean of -7.2 and - 8.0 for the carbonate and sandstone aquifers, respectively. The variograms were calculated using an estimator developed by Li and Lake (1994). Fractal nature was not evident in the variogram from either aquifer. The Bayesian updating heterogeneous field provided good results even in cases where little data was available. A large transmissivity zone in the sandstone aquifer was created by the Bayesian procedure, which is not a reflection of any deterministic consideration, but is a natural outcome of updating a prior probability distribution function with observations. The statistical model returns a result that is very reasonable; that is homogeneous in regions where little or no information is available to alter an initial state. No long range correlation trends or fractal behavior of the log-transmissivity field was observed in either aquifer over a distance of about 300 km.     

Molecular modelling of rare earth element complexation in subduction zone fluids

Complexation of (trace) elements in fluids plays a critical role in determining element mobility in subduction zones, but to date, the atomic-scale processes controlling elemental solubilities are poorly understood. As a first step towards computer simulation of element complexation in subduction zone fluids, a thermodynamic cycle was developed to investigate the hydration environment and energetics of lanthanide complexes using density functional theory. The first solvation shell is explicitly defined and the remaining part of the aqueous fluid is modelled using a polarisable continuum model, which allows extrapolation to a broad pressure and temperature range.We illustrate our method by comparing solvation of lanthanide series elements in H₂O in the presence of fluoride or chloride for conditions relevant to subduction zones. The energetics of lanthanide- and lanthanide-fluoride/chloride hydration complexes were determined computationally. Calculated hydration free energies for trivalent lanthanides with explicit eight- and nine-fold coordinated first hydration shells show good agreement with literature data at room pressure and temperature. The hydration free energy is more negative for smaller complexes (heavy lanthanides) relative to larger complexes (light lanthanides), with the difference between La and Lu in water amounting to 361 kJ mol⁻¹. The hydration free energy of all lanthanide ions becomes less negative with increasing pressure (p) and temperature (T) up to 2.5 GPa and 1000 K (typical conditions in the upper part of subducting slabs). The free energy difference between light- and heavy-lanthanides remains essentially unchanged at elevated (p, T) conditions. There are minor geometrical differences in local hydration environment between light lanthanide-chloride (La-Nd) and heavy lanthanide-chloride (Pm-Lu) hydrated complexes, without a distinguishable energy difference. Complexation with fluoride is energetically more favourable than with chloride by 206 ± 4 kJ mol⁻¹ across the entire lanthanide series. The association of fluoride-water and chloride-water fragments with lanthanide-water complexes is energetically more favourable for aqueous lanthanide complexes surrounded by fewer first hydration shell water molecules.The methods developed in this study, in conjunction with simulation of the energetics of trace element incorporation into minerals, open the possibility to use molecular modelling to constrain elemental behaviour in subduction zones.     

Geochronology of Precambrian rocks in the Laramie Range and implications for the tectonic framework of Precambrian southern Wyoming

From Casper Mountain; at its northern end, to the northwestern margin of the Laramie anorthosite—syenite complex, in its central parts, the Laramie Range is underlain by granite and granitic gneiss that has a minimum age of 2.54 ± 0.04 Ga (Rb/Sr whole-rock isochron) and by metasedimentary rocks, including marble and quartzite, that appear to overlie the granitic gneiss nonconformably (minimum age: 1.7 Ga based on several horn-blende K/Ar dates). Southward from the anorthosite—syenite complex into Colorado, the Range is underlain chiefly by the Sherman Granite (1.41 Ga; Peterman and Hedge, 1968) and scattered patches of gneiss that are not dated, but are tentatively correlated wit similar gneiss in the southern Medicine Bow Mountains and in the Colorado Front Range, where they are dated as ? 1.7 Ga (Peterman and Hedge, 1968).The Laramie anorthosite—syenite complex (minimum age: ? 1.42 Ga or ? 1.51 Ga if a hornblende K/Ar date is accepted) apparently intruded the suture separating the old (? 2.5 Ga) continental edge from younger (? 1.7 Ga) geosynclinal rocks. The suture, which manifests itself as the Mullen Creek—Nash Fork shear zone in the Medicine Bow Mountains, also is the boundary between ensialic and ensimatic geosynclinal deposition that occurred during the interval 1.7–2.5 Ga ago.K/Ar dates on biotite and muscovite from rocks north of the anorthosite—syenite complex grade from 2.5 Ga on Casper Mountain down to 1.38 Ga near the complex. Near its northern tip, the Laramie Range is crossed by a geochronologic front, separating 2.5 Ga old gneiss whose K/Ar dates were not lowered by subsequent metamorphism from 2.5 Ga old gneiss whose mica dates were reset between 1.4 and 1.6 Ga ago.