Neoproterozoic diamictite in the Eastern Desert of Egypt and Northern Saudi Arabia: evidence of ~750 Ma glaciation in the Arabian–Nubian Shield?

The Neoproterozoic Atud diamictite in Wadi Kareim and Wadi Mobarak in the Eastern Desert of Egypt and the Nuwaybah formation in NW Saudi Arabia consist of poorly sorted, polymictic breccia, with clasts up to 1 m of granitoid, quartz porphyry, quartzite, basalt, greywacke, marble, arkose, and microconglomerate in fine-grained matrix. Stratigraphic relations indicate that the diamictite was deposited in a marine environment. Integrated field investigation, petrographic study and U–Pb SHRIMP zircon ages demonstrate that the Atud and Nuwaybah are correlative. The distribution of zircon ages indicate that ~750 Ma ages are dominant with a significant component of older materials, characterized by minor Mesoproterozoic and more abundant Paleoproterozoic and Neoarchean ages. Some matrix and metasedimentary clast zircons yield ages that are a few 10s of Ma younger than the age of the youngest clast (754 ± 15 Ma), suggesting Atud/Nuwaybah diamictite deposition ~750 Ma or slightly later, broadly consistent with being deposited during the Sturtian glaciation (740–660 Ma). The Paleoproterozoic and Neoarchean clasts have no source within the ensimatic Arabian–Nubian Shield. The distribution of the pre-Neoproterozoic ages are similar to the distribution of the pre-Neoproterozoic ages in Yemen and Saharan Metacraton, suggesting that these clasts have been transported hundreds of kilometers, maybe by ice-rafting. The Atud diamictite may represent important evidence for Cryogenian “Snowball Earth” in the Arabian–Nubian Shield.     

Optimum structural design of full-scale steel buildings using drift-tribe-charged system search

Earthquake Engineering and Engineering Vibration - In this paper, the potential of utilizing improved metaheuristic approaches in optimal design of building structures is concerned. In this regard,...     

Stiffness pathologies in discrete granular systems: Bifurcation,neutral equilibrium,and instability in the presence of kinematic constraints

The paper develops the stiffness relationship between the movements and forces among a system of discrete interacting grains. The approach is similar to that used in structural analysis, but the stiffness matrix of granular material is inherently nonsymmetric because of the geometrics of particle interactions and of the frictional behavior of the contacts. Internal geometric constraints are imposed by the particles' shapes, in particular, by the surface curvatures of the particles at their points of contact. Moreover, the stiffness relationship is incrementally nonlinear, and even small assemblies require the analysis of multiple stiffness branches, with each branch region being a pointed convex cone in displacement space. These aspects of the particle-level stiffness relationship give rise to three types of microscale failure: neutral equilibrium, bifurcation and path instability, and instability of equilibrium. These three pathologies are defined in the context of four types of displacement constraints, which can be readily analyzed with certain generalized inverses. That is, instability and nonuniqueness are investigated in the presence of kinematic constraints. Bifurcation paths can be either stable or unstable, as determined with the Hill–Bažant–Petryk criterion. Examples of simple granular systems of three, 16, and 64 disks are analyzed. With each system, multiple contacts were assumed to be at the friction limit. Even with these small systems, microscale failure is expressed in many different forms, with some systems having hundreds of microscale failure modes. The examples suggest that microscale failure is pervasive within granular materials, with particle arrangements being in a nearly continual state of instability.     

Removal of the Alphazurine FG Dye from Simulated Solution by Electrocoagulation

The removal of Alphazurine FG (AF) dye from water by an electrocoagulation process has been studied. The effect of some operational parameters, such as anode material, current density, initial dye concentration, pH of solution, conductivity, and inter‐electrode distance, on the removal efficiency was investigated. Iron and aluminum were used as anodes in the electrocoagulation cell. It was found that the efficiency of the iron anode was better than that of the aluminum anode for AF removal. The factors that affected the removal efficiency were the current density and the initial dye concentration. The removal efficiency increased from about 35% at 25 A m^–2 to about 97% at 100 A m^–2, during 4 min of electrocoagulation. The results exhibited pseudo‐first‐order kinetics for AF removal by electrocoagulation. In addition, a mathematical model was successfully established for predicting the removal efficiency. A comparison between the model results and experimental data gave a high correlation coefficient (R² = 0.9925), which indicates that the model is able to predict the removal efficiency of AF.     

新疆肖塘冬季土壤呼吸特征及影响因素

采用LI-COR8150多通道土壤碳通量观测系统对塔克拉玛干沙漠北缘肖塘地区盐碱地和流沙地土壤的冬季呼吸速率、土壤温度、含水量的日变化动态进行定位连续监测,并深入分析土壤水热因子对呼吸速率的影响。结果表明:(1)肖塘地区盐碱地和流沙地的土壤呼吸速率较低,具有明显的日变化规律,并会因土壤类型的不同而有微弱差异,总体上均呈不对称"钟形"的单峰型曲线。(2)夜间及凌晨2类土壤的呼吸速率多为负值,表明该时段土壤成为碳元素的汇集区,然而在日尺度上沙漠地区仍属于碳源,但相对较为微弱。(3)盐碱地和流沙地的土壤呼吸速率与土壤表层0~5cm平均温度均具有较为一致的昼夜变化趋势,且分别存在极显著的线性和指数回归关系。温度敏感性指数Q10在2类土壤中均较小,其中盐碱地Q10相对较大。(4)土壤呼吸速率与土壤表层0~5cm平均含水量在盐碱和流沙两地昼夜变化趋势均较为一致,且存在极显著的线性关系。(5)相对于单因素影响下的一维回归方程,土壤温度和含水量对土壤呼吸速率的二维回归方程能够更好地解释土壤呼吸随时间的变化情况,且土壤温度和含水量对于土壤呼吸速率均表现出明显的时滞效应。     

Curvilinear immersed boundary method for simulating coupled flow and bed morphodynamic interactions due to sediment transport phenomena

The fluid-structure interaction curvilinear immersed boundary (FSI-CURVIB) numerical method of Borazjani et al. [3] is extended to simulate coupled flow and sediment transport phenomena in turbulent open-channel flows. The mobile channel bed is discretized with an unstructured triangular mesh and is treated as a sharp-interface immersed boundary embedded in a background curvilinear mesh used to discretize the general channel outline. The unsteady Reynolds-averaged Navier-Stokes (URANS) equations closed with the k − ω turbulence model are solved numerically on a hybrid staggered/non-staggered grid using a second-order accurate fractional step method. The bed deformation is calculated by solving the sediment continuity equation in the bed-load layer using an unstructured, finite-volume formulation that is consistent with the CURVIB framework. Both the first-order upwind and the higher-order hybrid GAMMA schemes [12] are implemented to discretize the bed-load flux gradients and their relative accuracy is evaluated through a systematic grid refinement study. The GAMMA scheme is employed in conjunction with a sand-slide algorithm for limiting the bed slope at locations where the material angle of repose condition is violated. The flow and bed deformation equations are coupled using the partitioned loose-coupling FSI-CURVIB approach [3]. The hydrodynamic module of the method is validated by applying it to simulate the flow in an 180° open-channel bend with fixed bed. To demonstrate the ability of the model to simulate bed morphodynamics and evaluate its accuracy, we apply it to calculate turbulent flow through two mobile-bed open channels, with 90° and 135° bends, respectively, for which experimental measurements are available.     

The use of GIS and remote sensing for the assessment of waterlogging in the dryland irrigated catchments of Farafra Oasis,Egypt

This paper investigates the interplay of the hydrogeological characteristics, soil properties and recent land reclamation projects on the distribution of waterlogging and salinization within the Farafra Oasis. The multi‐temporal remote sensing data and field observations show that new reclaimed areas have been recently cultivated in distant areas from the old agricultural land. These new cultivations have developed widespread waterlogging, seepage channels and soil salinization. Analyses of the Shuttle Radar Topography Mission digital elevation model (DEM) showed that both old and new agricultural areas are located within same closed drainage basin. The fluvial channels of these catchments, which were developed during wet climatic pluvial, have largely been obliterated by the prevailing aridity and often buried under aeolian deposits. However, the new cultivations have been developed on the fingertips of these fluvial channels, while the old fields occupy the low‐level playas. The soil of the new cultivated areas is mainly lithic with a high calcium carbonate content, thus limiting the downward percolation of excess irrigation water and therefore developing perched water table and seepage through the palaeo‐channels. The automatically extracted drainage networks from DEM resemble fluvial patterns and coincide with the seepage channels slowly heading toward old cultivation. The inactive alluvial channels and landforms have to be considered when planning for new cultivation in dryland catchments to better control waterlogging and salinization hazard. It is highly recommended that newly developed seepage channels have to be detected and intercepted before reaching old agriculture areas. Therefore, the ‘dry‐drainage’ concept can be implemented as the seepage water can be conveyed into nearby playas reserved for evaporation. Copyright © 2012 John Wiley & Sons, Ltd.     

Mineralogical and spectroscopic characterization,and potential environmental use of limestone from the Abiod formation,Tunisia

Limestone beds of the Late Cretaceous Abiod formation (Campanian-Maastrichtian system) are fundamentally important for the economic growth of the raw material sector in Tunisia. However, little attention has been paid to the detailed physical and chemical properties of the Abiod limestone. Nine limestone samples collected from the Abiod formation outcropping in the areas of Bizerte, Gafsa and Gabes, Tunisia, as well as their separated clay fractions, were characterized using different techniques, such as XRF, XRD, FTIR and TG/DTA. XRF showed the chemical composition of the limestone in which calcium carbonate was the main constituent, and silica, iron and magnesium were the impurities. XRD also confirmed the presence of small amounts of clay minerals and quartz along with sharp peaks of calcite. FTIR spectra indicated that the limestone was mainly composed of CaCO₃ in the form of calcite, as identified by its main characteristic absorption bands. These data were in agreement with XRD and XRF analysis data. The TG/DTA curves of the limestone samples, showing a close similarity to that of pure calcium carbonate, exhibited an endothermic peak between 600 and 760°C, with the maximum near 750°C. Moreover, FTIR spectra of clay fraction samples indicated high silica content in some samples. Especially the samples SD1 and SD2 collected in the northern area showed higher amounts of silica compared with those of AS1, AS2, CHB, ZNC, SND, MKM and GBS collected from southern districts. However, among the latter seven samples, one could recognize two groups based on the clay mineral investigations: (1) limestone with minor amounts of smectite and mixed layer minerals of smectite/illite (AS1 and 2, CHB, ZNC, SND and GBS) and (2) limestone with smectite, kaolinite and apatite (SND and MKM). Differences in these mineralogical and chemical characteristics should be considered when limestone from the Abiod formation is utilized as a medium for heavy metal removal from wastewater.     

Structure of Mesozoic oceanic crust in the vicinity of the Cape Verde Islands from seismic reflection profiles

Multichannel seismic reflection profile data have been used to determine the internal structure of Mesozoic oceanic crust in the vicinity of the Cape Verde islands. The data show the oceanic crust to be characterized by both dipping and sub-horizontal reflectors. Several lines of evidence argue against the reflectors being scattering artifacts arising, for example, from rough basement topography. Instead, the reflectors are attributed to tectonic and magmatic processes associated with the accretion of oceanic crust at the Mid-Atlantic Ridge. The upper crust shows variable reflectivity due to both dipping and sub-horizontal events. We interpret the dipping reflectors, which have been identified on both ridge-normal and ridge-parallel profiles, as sub-surface expressions of normal faults that formed at or near the Mid-Atlantic Ridge. There is no evidence that the faults are caused by loading of the oceanic crust by either the Cape Verde islands or their associated topographic swell. Some faults, however, can be traced into the overlying sediments suggesting they may have been re-activated since their formation at the ridge. The origin of the sub-horizontal reflectors is not as clear. We believe them to be boundaries of different igneous lithologies, such as that between basalts and gabbros. The lower crust is highly reflective in some areas, whereas in others only a few dipping and sub-horizontal reflectors are observed. Some of the dipping reflectors can be traced into the upper crust, suggesting they are also normal faults. Others, however, appear to be confined to the lower crust. The sub-horizontal, discontinuous, reflectors about 2.0–2.5 seconds two-way travel time below the top of oceanic basement are attributed to the Moho.     

A systematized review exploring the map of publications on the health impacts of drought

Natural Hazards - Climate change is likely to increase the risk of drought which impacts on health are not quite known well due to its creeping nature. This study maps the publications on the...