Measurements and Modelling of the Wind Speed Profile in the Marine Atmospheric Boundary Layer

We present measurements from 2006 of the marine wind speed profile at a site located 18 km from the west coast of Denmark in the North Sea. Measurements from mast-mounted cup anemometers up to a height of 45 m are extended to 161 m using LiDAR observations. Atmospheric turbulent flux measurements performed in 2004 with a sonic anemometer are compared to a bulk Richardson number formulation of the atmospheric stability. This is used to classify the LiDAR/cup wind speed profiles into atmospheric stability classes. The observations are compared to a simplified model for the wind speed profile that accounts for the effect of the boundary-layer height. For unstable and neutral atmospheric conditions the boundary-layer height could be neglected, whereas for stable conditions it is comparable to the measuring heights and therefore essential to include. It is interesting to note that, although it is derived from a different physical approach, the simplified wind speed profile conforms to the traditional expressions of the surface layer when the effect of the boundary-layer height is neglected.     

Rehabilitation of damaged reefs: Outcome of the use of recently broken coral fragments and healed coral fragments of pocilloporid corals on rocky boulders

The use of two types of coral transplants on rock boulders was evaluated as a low‐cost alternative for rehabilitation of live coral coverage in localities whose reef structure has been reduced considerably. Transplant success between recently broken coral fragments (BCF) and healed coral fragments (HCF) was compared assuming that initial fragmentation accelerates the attachment of corals by regeneration stimulation. Two sets of both types of transplants were started during the dry and rainy seasons to contrast the effect of environmental stability on transplant survival, vertical growth and horizontal growth over 12 months. The technique provided adequate conditions for coral development, as transplants responded satisfactorily. BCF showed higher success than HCF in attaching to the substrate (up to 98 ± 4% versus 86.4 ± 18.9% after 9 months) during both seasons and also showed a greater increase in height (209.63 ± 43.65% versus 124 ± 15.83%) and diameter (107.26 ± 25.75% versus 99.98 ± 19.74%) during the rainy season. Boat anchorage caused mortality in transplants started during the dry season (less than 10% for BCF versus 37.2% for HCF) while the impact of Hurricane Polo in October 2014 caused higher mortality in transplants started during the rainy season (up to 55%). We conclude that (i) coral transplantation on rock boulders is a good choice to restore damaged coral communities, (ii) BCF seems to be the best source of transplants for pocilloporid corals, and (iii) although high light availability during the rainy season enhances transplant growth, the stable, low energy conditions in the dry season facilitate initial transplant attachment and high survival.     

The effect of metasomatism on the Cr-PGE mineralization in the Finero Complex, Ivrea Zone, Southern Alps

The magmatic metasomatism that was responsible for producing chromitite–dunite bodies in the unusual phlogopite peridotite of the Finero Complex in Permian to Triassic times also influenced the Cr-platinum group elements (PGE) mineralization. At least the end stages of this metasomatism are recorded in compositional zoning of chromite grains in the podiform chromitite. Metasomatic melt, with or without vapor, reacted with chromite to produce core-to-rim Cr enrichment of extant chromite grains and was concurrent with pyroxene crystallization. Under conditions of lower melt/rock ratio, metasomatism resulted in core-to-rim Al enrichment in chromite and crystallization of amphibole between chromite and clinopyroxene. This early, high-temperature metasomatism is unrelated to the later and pervasive K-metasomatism that crystallized phlogopite and was associated with the intrusion of clinopyroxenite dikes that cut the peridotite. Much later, serpentinization of olivine locally depleted chromite in Al and enriched it in Fe and formed minor amounts of magnetite.The PGE, which are present mainly as laurite inclusions in chromite, were remobilized by the early metasomatism. This resulted in substantial variation in the PGE contents of chromitites and imposed a characteristic PGE pattern in which chondrite-normalized Os, Ir, Ru and Rh contents are high but Pt and Pd contents are low. The slopes of PGE chondrite-normalized concentration patterns are systematically related to absolute PGE abundance and to rock mode. Chromitites with low modal orthopyroxene, clinopyroxene, and amphibole exhibit negative PGE slopes and contain relatively high PGE concentrations, whereas chromitites rich in these silicate minerals have positive slopes and low PGE contents.     

Life‐cycle cost analysis based on a renewal model of earthquake occurrences

A decision methodology for the management of seismic risk of a single building is presented. The decision criterion aims at minimizing the expected life‐cycle cost, including the initial cost of the design and the expected cost of damage due to future earthquakes. The expected life‐cycle cost of each design alternative is formulated using a renewal model for the occurrence of earthquakes in a seismic source, which accounts for the temporal dependence between the occurrence of ‘characteristic’ earthquakes. The formulation involves the expected damage cost from an earthquake of specified magnitude in a given source. This term is estimated by simulating the processes of fault rupture, elastic wave propagation, surface soil amplification, dynamic structural response and generation of damage costs. As an example, the methodology is applied to an actual office building in Tokyo. A simple decision problem between two design alternatives is set: a bare steel moment frame, and the same frame equipped with oil dampers. Through this case study, the installation of the oil dampers is demonstrated to be effective in reducing the life‐cycle cost of the building under consideration. Copyright © 2004 John Wiley & Sons, Ltd.     

Lifeline response to spatially variable ground motions

Lifeline systems have been heavily damaged during past earthquakes; this has often been attributed to the effect of differential ground motion at the supports of these long structures. Based on a stochastic model for the ground excitation the responses of pipelines and bridges of various span lengths subjected to either perfectly or partially correlated random input motions in the axial, lateral (i.e. transverse horizontal) and vertical directions are investigated and the significance of the spatial variation of ground motion is examined.     

Gravimetric determination of an intrusive complex under the Island of Faial (Azores): some methodological improvements

We present some improvements of a gravity inversion method to determine the geometry of the anomalous bodies for priori density contrasts. The 3-D method is based on an exploratory process applied, not for the global model, but for the steps of a growth approach. The (positive and/or negative) anomalous structure is described by successive aggregation of cells, while its corresponding gravity field remains nearly proportional to the observed one. Moreover, a simple (e.g. linear) regional trend can be simultaneously adjusted. The corresponding program is applied to new gravity data on the volcanic island of Faial (Azores archipelago). The inversion approach shows a subsurface anomalous structure for the island, the main feature being an elongated high-density body. The body is interpreted as a compact sheeted dyke swarm, emplaced along Faial-Pico Fracture Zone, a leaky transform structure that forms the current boundary between Eurasian and African plates in the Azores area. The new results in this paper are (1) a Bouguer gravity anomaly map, (2) several improvements in the inversion process (robust process, optimal balance fitness/model magnitude), (3) a new gravimetric method for estimating the mean terrain density, (4) a 3-D model for subsurface mass anomalies in Faial and (5) some interpretative conclusions about a main intrusive complex detected under the island as a wall-like structure extending from a depth of 0.5 to 6 km b.s.l., with a N100°E trend and corresponding to an early fissural volcanic episode controlled by the regional tectonics.     

Iron,manganese and trace metal concentrations in seaweeds from the central west coast of the Gulf of California

Concentrations of Co, Cu, Fe, Mn, Ni, Pb and Zn in four macroalgae species (Ulva lactuca, Chondracanthus squarrulosus, Sargassum sinicola and Gracilariopsis lemaneiformis) were obtained for the first time from the central part of the west coast of the Gulf of California. Generally, no differences in metal concentrations were found among the different seaweed species, although spatial differences were apparent. Iron, Mn and Cu exhibited higher concentrations at the stations located in front of Angel de la Guarda Island, probably because of high vertical mixing processes present in the zone. The results were compared with dissolved metal concentrations reported for the Gulf of California (Cd, Mn and Fe) and the North Pacific Ocean. The resulting linear regression of the results vs. North Pacific Ocean concentrations indicated that the levels of Cu, Ni and Zn measured in this study were within its 95% confidence level. Furthermore, this comparison was capable of detecting dissolved Fe and Mn enrichments in Gulf of California waters relative to the North Pacific Ocean concentrations. Calculations of total masses of metals associated with algal biomass on the west coast of the Gulf of California indicated that the lowest masses were represented by Cu (108 ± 25 kg) and Ni (184 ± 52 kg), whereas Pb (1.1 ± 0.6 ton) and Fe (10.9 ± 8.5 ton) were the elements with the highest associated masses.