Parallax distortion by the weak microlensing effect

Parallax measurements allow distances to celestial objects to be determined. Together with measurements of their position on the celestial sphere, they give a full three-dimensional picture of the location of the objects relative to the observer. The distortion of the parallax value of a distant source affected by weak microlensing is considered. This means that the weak microlensing leads to distortion of the distance scale. The gravitational deflection causes a retrograde apparent motion of the image, which is revealed as a negative parallax. It is shown that the distortions may significantly change the parallax values when they amount to several microseconds of arc. In particular, at this level many measured values of parallaxes should be negative.     

Celestial-mechanical peculiarities of Uranus’s satellite system

We consider the structural peculiarities of Uranus’s satellite system associated with its separation into two groups: inner equatorial satellites moving in nearly circular orbits and distant irregular satellites with retrograde motion in highly elliptical orbits. The intermediate region is free from satellites in a wide range of semimajor axes. By analyzing the evolution of satellite orbits under the combined effect of solar attraction and Uranus’s oblateness, we offer a celestial-mechanical explanation for the absence of equatorial satellites in this region. M.L. Lidov’s studies during 1961–1963 have served as a basis for our analysis.     

On the temperature measurement from the O IV emission lines

The new calculations of the Oiv temperature-sensitive EUV line ratios are presented and compared with previous results.     

High-temperature geothermal reservoir possibilities in Hungary

Theoretical studies have shown the possibility of high-temperature ('high enthalpy') geothermal reservoirs in the pre-Tertiary rocks at 4–5 km depth range within the Pannonian Basin. This expectation was proven by the hotwater/steam blowout of Fábiánsebestyén-4 borehole (16.12.85–31.1.86). Exploration efforts carried out during 1987–88 in the broad vicinity of the borehole proved that reservoirs of this type can be found with the combination of seismic reflection, silica-thermometry and magnetotelluric sounding methods. Deliberate prospection should be continued in all suitable areas within the basin, since high enthalpy reservoirs promise profitable operation of geothermal power stations.     

Remarks on dynamical ellipticity at the Earth's

In this paper, two factors — the redistribution of the density and the variation in the angular velocity of the Earth rotation, that affect the adopted value of the flattening for equidensity surface within the Earth, are discussed. The computational results show that the contribution of the redistribution of the density in the Earth interior (especially in the core) on the change of the flattening at the core-mantle boundary (CMB) is marginal, and that the calculated value of the flattening at the CMB can be in good agreement with the VLBI observed value so long as the fact that the angular velocity of the Earth rotation has undergone the tidal evolution is taken into account. As a result, this paper presents a set of recommended values of the dynamical parameters of the Earth (see Table III) for computing Earth's forced nutation series.     

Capture of particles in hypervelocity impacts in aerogel

Abstract— The capture in aerogel of 106 μm diameter glass beads is investigated for impact speeds of 1 to 7.5 km s^?1. Three different aerogel densities were used, 60,96 and 180 kg m^?3. It was found that the length of the penetration track in the aerogel increases with speed until a maximum is reached. Above the maximum speed the track length decreases. This behaviour is similar to that which has previously been observed for particles impacting polystyrene foams and porous alumina. Whilst track length was not found to be an unambiguous indicator of impact speed, the excavated track volume was found to be a suitable indictor of speed. Further, it was possible to estimate the original particle size by measurements of the track volume and entrance hole size. In addition sub‐100 μm diameter particles composed of various minerals were fired into aerogel and the characterisation of the particles in situ by use of a Raman spectrometer was evaluated. This was found to work well, giving vibrational spectra essentially similar to those of the bulk minerals, thus providing a mineralogical rather than an elemental signature for the captured particles.     

The electron pressure in the outer atmosphere of ε Eri (K2 V)

Observations of ε Eri (K2 V) have been made with the Space Telescope Imaging Spectrograph on the Hubble Space Telescope . The spectra obtained show a number of emission lines which can be used to determine, or place limits on, the electron density and pressure. Values of the electron pressure are required in order to make quantitative models of the transition region and inner corona from absolute line fluxes, and to constrain semi-empirical models of the chromosphere. Using line flux ratios in Si  iii and O  iv a mean electron pressure of P _e= N _e T _e=4.8×10¹⁵ cm⁻³ K is derived. This value is compatible with the lower and upper limits to P _e found from flux ratios in C  iii , O  v and Fe  xii . Some inconsistencies which may be because of small uncertainties in the atomic data used are discussed.     

SARG: The High Resolution Spectrograph of TNG

SARG is a cross dispersed echelle spectrograph in operation since late spring 2000 at the Italian Telescopio Nazionale Galileo (TNG) 3.5 m telescope, La Palma. SARG offers both single object and long slit (up to 26 arcsec) observing modes covering a spectral range from λ = 0.37 up to1 μm, with resolution ranging from R = 29,000 up to R = 164,000. Cross dispersion is provided by means of a selection of four grisms; interference filters may be used for the long slit mode (up to 26 arcsec). A dioptric camera images the cross dispersed spectra onto a mosaic of two 2048 × 4096 EEV CCDs (pixel size: 13.5 μm) allowing complete spectral coverage at all resolving power for λ < 0.8 μm. In order to reach a high wavelength calibration precision an iodine-absorbing cell is provided. A Distributed Active Temperature Control System (DATCS) maintains constant the temperature of all spectrograph components at a preset value. Early results show that SARG works according to original specifications in terms of wavelength coverage, efficiency (measured peak efficiency is about 13%),resolution (maximum resolution R = 164,000 using a 0.3 arcsec slit, R ∼144,000 using an image slicer), and stability (preliminary estimates of radial velocity accuracy is ∼3 m/s using the iodine cell and ±150 m/s without the iodine cell). This revised version was published online in July 2006 with corrections to the Cover Date.     

抗差估计的初值选择

对L1 范估计的平差值和LS估计的平差值作为抗差估计的初值进行了比较 ,指出在 ρ函数是严凸函数时 ,二者无明显的区别。因为LS估计简单且易于计算 ,因此建议用LS估计的平差值作为抗差估计的初值。