Elastic properties and stability of coexisting 3T and 2M 1 phengite polytypes

The elastic properties of coexisting natural 3T and 2M ₁ phengite samples (Cima Pal, Sesia Zone; Val Savenca; Western Alps, Italy) with similar chemical compositions have been studied by room temperature–high pressure powder diffraction, using synchrotron radiation on the ID9A beam-line at ESRF (Grenoble, France). The P–V curves have been modelled by the Birch–Murnaghan model; a third-order expansion fitted to the experimental data yields for 3T and 2M ₁ K ₀=60.4(±0.7) GPa, K′=5.79(±0.11) at V ₀=703.8851 ų, and K ₀=57.3(±1.0) GPa, K′=6.97(±0.24) at V ₀=938.8815 ų, respectively. The relative stability of 3T vs. 2M ₁ has been explored as a function of pressure and temperature in terms of configuration and deformation contributions to the Gibbs energy, using the elastic properties determined here and other thermodynamic parameters from earlier investigations. The results presented agree with the hypothesis of stability of the 3T polytype in the high pressure regime.     

Resilience and brittleness in the ALERTA RIO system: a field study about the decision-making of forecasters

Natural disasters, particularly those triggered by heavy rainfall, may cause major damage and death. However, if an accurate early warning is issued, the damage can be mitigated. In Latin America and Brazil, characteristics of socioeconomic development often lead to a disorderly growth of cities and, consequently, occupation and irregular construction in risk areas. Therefore, forecasts of heavy rainfall, as well as preventative and mitigatory actions based on meteorological data/alerts, are essential to saving lives and minimizing material loss. An event that would have benefited from such actions is that which occurred in the mountainous region of Rio de Janeiro in January 2011, when over 800 people lost their lives. This work describes the first research initiative on resilience engineering domain in systems to forecast heavy rains in Rio de Janeiro. The results indicate important sources of brittleness in the system that supports the work of meteorologists, mainly related to the technical and organizational framework, and suggests that the main source of resilience in dealing with critical situations is the tacit knowledge of experts.     

Magnetic properties and cation ordering of nanopowders of the synthetic analogue of kuramite, Cu3SnS4

An extensive characterisation of the magnetic properties of synthetic powders of kuramite, with formal composition Cu₃SnS₄, was performed. Powders were investigated through superconducting quantum interference device (SQUID) magnetometry, electron paramagnetic resonance (EPR) spectroscopy, X-ray powder diffraction (XRPD), scanning and transmission electron microscopies (SEM and TEM) and microanalysis. SEM and TEM reveal the presence of nanodimensioned particles. XRPD clearly shows that Cu₃SnS₄ crystallised in a cubic sphalerite-type structural model, in spite of the stannite-type tetragonal structure described for the natural phase. This difference arises from a full random distribution of cations. Synthetic kuramite nanopowders exhibit a marked paramagnetism, originated by the presence of Cu(II), definitely assessed by EPR measurements. Moreover, the overall magnetic behaviour of the sample cannot be simply ascribed to diluted paramagnetism, and this suggests the presence of strong superexchange interactions among Cu(II) ions even at room temperature. The main consequences of these results are the definitive assessment of the chemical formula Cu(I)₂Cu(II)SnS₄ and of a random distribution of Cu(II), Cu(I) and Sn(IV) ions within the available tetrahedral sites.     

Hydrogen emissions from Erebus volcano, Antarctica

The continuous measurement of molecular hydrogen (H₂) emissions from passively degassing volcanoes has recently been made possible using a new generation of low-cost electrochemical sensors. We have used such sensors to measure H₂, along with SO₂, H₂O and CO₂, in the gas and aerosol plume emitted from the phonolite lava lake at Erebus volcano, Antarctica. The measurements were made at the crater rim between December 2010 and January 2011. Combined with measurements of the long-term SO₂ emission rate for Erebus, they indicate a characteristic H₂ flux of 0.03?kg s^–1 (2.8?Mg? day^–1). The observed H₂ content in the plume is consistent with previous estimates of redox conditions in the lava lake inferred from mineral compositions and the observed CO₂/CO ratio in the gas plume (～0.9 log units below the quartz–fayalite–magnetite buffer). These measurements suggest that H₂ does not combust at the surface of the lake, and that H₂ is kinetically inert in the gas/aerosol plume, retaining the signature of the high-temperature chemical equilibrium reached in the lava lake. We also observe a cyclical variation in the H₂/SO₂ ratio with a period of ～10?min. These cycles correspond to oscillatory patterns of surface motion of the lava lake that have been interpreted as signs of a pulsatory magma supply at the top of the magmatic conduit.     

On the seismic performances of rigid block‐like structures coupled with an oscillating mass working as a TMD

In this paper, the effects of a mass damper on the rocking motion of a non‐symmetric rigid block‐like structure, subject to different seismic excitation, are investigated. The damper is modelled as a single degree of freedom oscillating mass, running at the top of the block and connected to it by a linear visco‐elastic device. The equations of rocking motion, the uplift and the impact conditions are derived. A nondimensionalisation of the governing equations is performed with the aim to obtain an extensive parametric analysis. The results are achieved by numerical integration of these equations. The slenderness and the base of the rigid block, and the eccentricity of the centre of mass are taken as variable parameters in the analyses. The main objective of the study is to check the performance of the damper versus the spectral characteristics of the seismic input. Three earthquake registrations with different frequency contents are used in the analyses. The results show that the presence of the mass damper leads to different levels of improvement of the response of the system, depending on the spectral characteristics of the seismic input. Curves providing the overturning slenderness of blocks of specific sizes versus the characteristics of the TMD are obtained. Copyright © 2017 John Wiley & Sons, Ltd.     

A conceptual hydrogeological model of ophiolitic aquifers (serpentinised peridotite): The test example of Mt. Prinzera (Northern Italy)

The main aim of this study is the experimental analysis of the hydrogeological behaviour of the Mt. Prinzera ultramafic massif in the northern Apennines, Italy. The analysed multidisciplinary database has been acquired through (a) geologic and structural survey; (b) geomorphologic survey; (c) hydrogeological monitoring; (d) physico‐chemical analyses; and (e) isotopic analyses. The ultramafic medium is made of several lithological units, tectonically overlapped. Between them, a low‐permeability, discontinuous unit has been identified. This unit behaves as an aquitard and causes a perched groundwater to temporary flow within the upper medium, close to the surface. This perched groundwater flows out along several structurally controlled depressions, and then several high‐altitude temporary springs can be observed during recharge, together with several perennial basal (i.e., low altitude) springs, caused by the compartmentalisation of the system because of high‐angle tectonic discontinuities.     

Biosedimentary record of postglacial coastal dynamics: high‐resolution sequence stratigraphy from the northern Tuscan coast (Italy)

Integrating analysis of the benthic palaeoecological record with multivariate ordination techniques represents a powerful synergy able to provide an improved characterization of coastal depositional facies in a sequence stratigraphical perspective. Through quantitative analysis of benthic foraminifer, ostracod and mollusc associations from the postglacial succession of Core M3 (Arno coastal plain, Tuscany, Italy), and application of detrended correspondence analysis (DCA) to the mollusc sub‐data set, we offer a refined picture of stratigraphical variations in faunal content from a paralic depositional setting, and reconstruct the palaeoenvironmental gradients that account for such variations. Despite distinct ecological behaviours, and taphonomic and sedimentological constraints, a strong ecological control on meio‐ and macrofaunal biofacies and taxa turnover is documented across the study succession. Amongst all possible mechanisms that may play a role in ‘shaping’ fossil distribution, the ecological signal driven by salinity represents the most prominent factor controlling the composition of fossil associations in the cored succession. Molluscs can even provide outstanding quantitative estimates of palaeosalinity along the sampled core. When plotted stratigraphically, the three fossil sub‐data sets show consistent patterns of vertical evolution that enable prompt identification of the key surfaces for sequence stratigraphical interpretation in otherwise lithologically indistinguishable deposits. The concomitant maximum richness of species with strong marine affinity, paralleled by the highest DCA salinity estimates, allows recognition of the maximum flooding zone, dated to ～7.7 cal. ka BP, within a homogeneous succession of outer lagoon clays. These clays are sandwiched between early transgressive, swamp to inner lagoon deposits and overlying prograding coastal?alluvial plain facies.     

'Sediment'–cement relationships in a Pleistocene speleothem from Italy: a possible analogue for 'replacement' cements and Archaeolithoporella in ancient reefs

Ancient carbonate buildups may contain extraordinarily large amounts of early diagenetic precipitates. In some, host rock lamination may be traced into inclusion bands within the 'cement' crystals, suggesting that the crystals are replacive. By analogy with a Pleistocene speleothem from the Sorrento Peninsula, however, these relationships can be explained differently. In the speleothem, large, repeatedly split and dendritic calcite crystals occur within a laminated carbonate. Lamination consists of sub-mm alternations of micrite and microspar. Micritic laminae pass laterally into inclusion-rich growth bands in the dendritic calcite crystals, and have replaced an aragonitic cement, whereas the microspar laminae were primary calcite cements. Three types of inclusion-rich bands occur in the dendrite crystals: (1) with aragonite relicts, (2) 'ribbon calcite' and (3) with oriented micropores. When aragonite precipitated, the calcite dendrite branches were unable to keep growing as single crystals and split into crystallites (separated by micropores, some forming ribbon calcite), whereas during episodes of calcite lamina precipitation, the larger crystals were regenerated by crystallite coalescence. Calcite crystals are primary: they did not replace a micritic precursor. By analogy with the Italian speleothem, some ancient reefal sparry carbonates may not be replacements of earlier laminated sediments, but may have grown concurrently with them. It is also probable that some ancient laminated sediments were instead sea-floor precipitates, and that stromatolites containing cross-cutting crystal fabrics, and the alternating micrite-microspar laminae typical of Archaeolithoporella , could be largely abiotic crystal growths.     

Glaucony from the Cretaceous of the Sierra de Guadarrama (Central Spain) and its application in a sequence-stratigraphic context

Detailed sedimentological and geochemical analyses of Upper Cretaceous glaucony-bearing deposits from the middle portion of the Castro de Fuentidueña Formation, in Central Spain, enable identification of a multiphase history of glaucony accumulation. Despite its relatively high maturity (K₂O > 7%), glaucony from the transgressive subtidal sandstones has anomalously low concentration in the host rock (generally <10%), suggesting remobilization from a different source. The remarkable thickness of the glaucony-bearing horizons, concurrently with concentration of glaucony in laminae, small size, and high degree of roundness and sorting provide further evidence for an allochthonous origin of the green grains. In contrast, authigenic glaucony from the overlying offshore clays exhibits higher abundance (up to 45%) and lower maturity (K₂O < 7%) and is interpreted to have formed in situ. Allochthonous glaucony originally developed in more distal areas during a prolonged period of sediment starvation. The green grains were then swept away from their place of origin and concentrated into tidal bars and channels within the upper transgressive systems tract of the third-order depositional sequence. Maximum concentration of autochthonous glaucony is recorded at the transition from tidal-influenced to offshore deposits: this glaucony, which is relatively less evolved due to lower time available for maturation, is interpreted to reflect the turnaround from transgressive to highstand conditions, marking the condensed section of the depositional sequence. As postulated by previous sequence-stratigraphic models, this study documents that allochthonous glaucony can be widespread throughout the transgressive systems tract (TST), while the condensed section (CS) typically hosts autochthonous glaucony. Contrary to the existing literature, however, this study shows that glaucony from the TST may be even more mature than glaucony from the CS, if enough time for maturation during transgression is allowed before the ultimate concentration of the green grains. Identification of spatial and temporal characteristics of glaucony, thus, is critical to a reliable sequence-stratigraphic interpretation of the glaucony-bearing deposits.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.