Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.     

Methods for estimating the velocities of the Brazil Current in the pre-salt reservoir area off southeast Brazil (23∘ S–26∘ S)

The Brazil Current (BC) is likely the least observed and investigated subtropical western boundary current in the world. This study proposes a simple and systematic methodology to estimate quasi-synoptic cross-sectional speeds of the BC within the Santos Basin (23^° S–26^° S) based on the dynamic method using several combinations of data: Conductivity, temperature, and depth (CTD), temperature profiles, CTD and vessel-mounted Acoustic Doppler Current Profiler (VMADCP), and temperature profiles and VMADCP. All of the geostrophic estimates agree well with lowered Acoustic Doppler Current Profiler (LADCP) velocity observations and yield volume transports of -5.56 ±1.31 and 2.50 ±1.01 Sv for the BC and the Intermediate Western Boundary Current (IWBC), respectively. The LADCP data revealed that the BC flows southwestward and is ～100 km wide, 500 m deep, and has a volume transport of approximately -5.75 ±1.53 Sv and a maximum speed of 0.59 m s^?1. Underneath the BC, the IWBC flows northeastward and has a vertical extent of approximately 1,300 m, a width of ～60 km, a maximum velocity of ～0.22 m s?¹, and a volume transport of 4.11 ± 2.01 Sv. Our analysis indicates that in the absence of the observed velocities, the isopycnal (σ ₀) of 26.82 kg m^?3 (～500 dbar) is an adequate level of no motion for use in geostrophic calculations. Additionally, a simple linear relationship between the temperature and the specific volume anomaly can be used for a reliable first estimate of the BC-IWBC system in temperature-only transects.     

Patos Lagoon outflow within the Río de la Plata plume using an airborne salinity mapper: Observing an embedded plume

Major river systems discharging into continental shelf waters frequently form buoyant coastal currents that propagate along the continental shelf in the direction of coastal trapped wave propagation (with the coast on the right/left, in the northern/southern hemisphere). The combined flow of the Uruguay and Paraná Rivers, which discharges freshwater into the Río de la Plata estuary (Lat. ∼36°S), often gives rise to a buoyant coastal current (the ‘Plata plume’) that extends northward along the continental shelf off Uruguay and Southern Brazil. Depending upon the prevailing rainfall, wind and tidal conditions, the Patos/Mirim Lagoon complex (Lat. ∼32°S) may also produce a freshwater outflow plume that expands across the inner continental shelf. Under these circumstances the Patos outflow plume can be embedded in temperature, salinity and current fields that are strongly influenced by the larger Plata plume. The purpose of this paper is to present observations of such an embedded plume structure and to determine the dynamical characteristics of the ambient and embedded plumes.     

Assessment of calanchi and rill–interrill erosion susceptibilities using terrain analysis and geostochastics: A case study in the Oltrepo Pavese,Northern Apennines,Italy

Soil erosion is one of the most important environmental problems distributed worldwide. In the last decades, numerous studies have been published on the assessment of soil erosion and the related processes and forms using empirical, conceptual and physically based models. For the prediction of the spatial distribution, more and more sophisticated stochastic modelling approaches have been proposed – especially on smaller spatial scales such as river basins. In this work, we apply a maximum entropy model (MaxEnt) to evaluate badlands (calanchi) and rill–interrill (sheet erosion) areas in the Oltrepo Pavese (Northern Apennines, Italy). The aim of the work is to assess the important environmental predictors that influence calanchi and rill–interrill erosion at the regional scale. We used 13 topographic parameters derived from a 12 m digital elevation model (TanDEM-X) and data on the lithology and land use. Additional information about the vegetation is introduced through the normalized difference vegetation index based on remotely sensed data (ASTER images). The results are presented in the form of susceptibility maps showing the spatial distribution of the occurrence probability for calanchi and rill–interrill erosion. For the validation of the MaxEnt model results, a support vector machine approach was applied. The models show reliable results and highlight several locations of the study area that are potentially prone to future soil erosion. Thus, coping and mitigation strategies may be developed to prevent or fight the soil erosion phenomenon under consideration. © 2020 John Wiley & Sons, Ltd.     

An analysis of change in alpine annual maximum discharges: implications for the selection of design discharges

The paper presents an analysis of 17 long annual maximum series (AMS) of flood flows for Swiss Alpine basins, aimed at checking the presence of changes in the frequency regime of annual maxima. We apply Pettitt's change point test, the nonparametric sign test and Sen's test on trends. We also apply a parametric goodness‐of‐fit test for assessing the suitability of distributions estimated on the basis of annual maxima collected up to a certain year for describing the frequency regime of later observations. For a number of series the tests yield consistent indications for significant changes in the frequency regime of annual maxima and increasing trends in the intensity of annual maximum discharges. In most cases, these changes cannot be explained by anthropogenic causes only (e.g. streamflow regulation, construction of dams). Instead, we observe a statistically significant relationship between the year of change and the elevation of the catchment outlet. This evidence is consistent with the findings of recent studies that explain increasing discharges in alpine catchments with an increase in the temperature controlling the portion of mountain catchments above the freezing point. Finally, we analyse the differences in return periods (RPs) estimated for a given flood flow on the basis of recent and past observations. For a large number of the study AMS, we observe that, on average, the 100‐year flood for past observations corresponds to a RP of approximately 10 to 30 years on the basis of more recent observation. From a complementary perspective, we also notice that estimated RP‐year flood (i.e. flood quantile (FQ) associated with RP) increases on average by approximately 20% for the study area, irrespectively of the RP. Practical implications of the observed changes are illustrated and discussed in the paper. Copyright © 2011 John Wiley & Sons, Ltd.     

An overview of seismic testing needs in Europe: towards a new advanced experimental facility

This paper presents a synthesis of the activities carried out in the framework of the European project EFAST (design study of a European Facility for Advanced Seismic Testing) to determine the general characteristics of a new European world-class facility for earthquake testing of structures. To this end the demands for the necessary testing to support the modern seismic engineering research have been investigated and compared to the actual capabilities of European laboratories. The outcome is the determination of performance objectives and requirements in the gross. On the basis of the needs assessment carried out during the first phase of the project and taking into account the technological advances in both experimental techniques and equipment (hardware and software) for seismic testing, a modern facility for experimental seismic research should be composed, mainly, of a high performance shaking tables array and a large reaction structure where both traditional (pseudo-static/dynamic) and innovative testing techniques (e.g. real time hybrid testing) can be applied and combined. A tentative layout of the facility is also proposed and issues related to the best utilization of such a laboratory are discussed.     

Response of single benthic metrics and multi-metric methods to anthropogenic pressure gradients, in five distinct European coastal and transitional ecosystems

In recent times many benthic indices have been proposed to assess the ecological quality of marine waters worldwide. In this study we compared single metrics and multi-metric methods to assess coastal and transitional benthic status along human pressure gradients in five distinct environments across Europe: Varna bay and lake (Bulgaria), Lesina lagoon (Italy), Mondego estuary (Portugal), Basque coast (Spain) and Oslofjord (Norway). Hence, 13 single metrics (abundance, number of taxa, and several diversity and sensitivity indices) and eight of the most common indices used within the European Water Framework Directive (WFD) for benthic assessment were selected: index of size spectra (ISS), Benthic assessment tool (BAT), Norwegian quality index (NQI), Multivariate AMBI (M-AMBI), Benthic quality index (BQI), (Benthic ecosystem quality index (BEQI), Benthic index based on taxonomic sufficiency (BITS), and infaunal quality index (IQI). Within each system, sampling sites were ordered in an increasing pressure gradient according to a preliminary classification based on professional judgement. The different indices are largely consistent in their response to pressure gradient, except in some particular cases (i.e. BITS, in all cases, or ISS when a low number of individuals is present). Inconsistencies between indicator responses were most pronounced in transitional waters (i.e. IQI, BEQI), highlighting the difficulties of the generic application of indicators to all marine, estuarine and lagoonal environments. However, some of the single (i.e. ecological groups approach, diversity, richness) and multi-metric methods (i.e. BAT, M-AMBI, NQI) were able to detect such gradients both in transitional and coastal environments, being these multi-metric methods more consistent in the detection than single indices. This study highlights the importance of survey design and good reference conditions for some indicators. The agreement observed between different methodologies and their ability to detect quality trends across distinct environments constitutes a promising result for the implementation of the WFD’s monitoring plans. Moreover, these results have management implications, regarding the dangers of misclassification, uncertainty in the assessment, use of conflicting indices, and testing and validation of indices.     

The 29 September 2009 Samoa Islands Tsunami: Simulations Based on the First Focal Mechanism Solutions and Implications on Tsunami Early Warning Strategies

The tsunamigenic earthquake (Mw?=?8.1) that occurred on 29 September 2009 at 17:48 UTC offshore of the Samoa archipelago east of the Tonga trench represents an example of the so-called ??outer-rise?? earthquakes. The areas most affected were the south coasts of Western and American Samoa, where almost 200 people were killed and run-up heights were measured in excess of 5?m at several locations along the coast. Moreover, tide gauge records showed a maximum peak-to-peak height of about 3.5?m near Pago Pago (American Samoa) and of 1.5?m offshore of Apia (Western Samoa). In this work, different fault models based on the focal mechanism solutions proposed by Global CMT and by USGS immediately after the 2009 Samoan earthquake are tested by comparing the near-field recorded signals (three offshore DART buoys and two coastal tide gauges) and the synthetic signals provided by the numerical simulations. The analysis points out that there are lights and shadows, in the sense that none of the computed tsunamis agrees satisfactorily with all the considered signals, although some of them reproduce some of the records quite well. This ??partial agreement?? and ??partial disagreement?? are analysed in the perspective of tsunami forecast and of Tsunami Early Warning System strategy.     

Carbonatation processes at the El Berrocal natural analogue granitic system (Spain): inferences from mineralogical and stable isotope studies

The El Berrocal granite/U-bearing quartz vein system has been studied as a natural analogue of a high-level radioactive waste repository. The main objective is to understand the geochemical behaviour of natural radionuclides occurring under natural conditions. In this framework, the carbonatation processes have been studied from a mineralogical and isotopic ( and ) point of view, since carbonate anions are powerful complexing agents for U(VI) under both low-temperature hydrothermal and environmental conditions. The carbonatation processes in the system are identified by the presence of secondary ankerite, with minor calcite, scattered in the hydrothermally altered granite, and Mn calcite in fracture filling materials. The isotopic signatures of these carbonates lead us to conclude that ankerite and calcite from the former were formed at the end of the same hydrothermal process that altered the granite, at a temperature range of between 72° and 61°C for ankerite, and between 52° and 35°C for calcite. The effect of edaphic CO₂ on both carbonates, greater on calcite than on ankerite, is demonstrated. Calcites from fracture fillings are, at least, binary mixtures, in different proportions, of hydrothermal calcite, formed between 25° and <100°C, and supergenic calcite, formed at ≤25°C. According to their signatures, the effect of edaphic CO₂ in both calcites is also evident. It is assumed that: (i) hydrothermal calcite from fracture fillings and ankerite from the hydrothermally altered granite are the result of the same hydrothermal process, their chemical differences being due to the intensity of the water/rock interaction which was stronger in the altered granite than in the fractures; and (ii) all of these carbonatation processes are responsible for ancient and recent migration/retention of uranium observed in the hydrothermally altered granite and fracture fillings.     

Misinterpretation of the Kenessey method for the determination of the runoff coefficient: a review

The calculation of runoff and infiltration parameters is a fundamental task for water budget estimation and water resources management. The “Kenessey method” allows these values to be calculated and its use is widespread among water scientists and practitioners. Due to language barriers and inefficient translation in past decades, the method has undergone some misinterpretations and is now far from its original usefulness and purpose. The use of the modified method can give unreal results for specific climatic zones. The purpose of this paper is to point out these methodological variations and to return to the original approach, improving it with modern technology.