Technical, financial and location criteria for the design of land application system treatment

Conventional water treatments when downsized to cover the demands of small and scattered populations are costly and ineffective. In fact, many small towns cannot afford the high average treatment costs nor provide the skill and complex management requirements. Even when these facilities are available, waste water might not be properly treated. Land application system treatments (LAST) have been shown to be preferable on the basis of their technical effectiveness and financial viability. The recently approved Spanish regulations (RDL 1620/2007, pp 50369–50661) represent an opportunity for the implementation of well-designed LASTs. This paper presents an assessment methodology for the design of LASTs by combining technical, financial and location criteria. The method is applied to the design of LASTs to cover the water disposal demand of twelve municipalities located within the protected natural landscape, and surrounding areas of ‘El Rebollar’, Salamanca, Spain.     

ESEEM of industrial quartz powders: insights into crystal chemistry of Al defects

A set of raw industrial materials, that is, pure quartz and quartz-rich mixtures, were investigated through electron paramagnetic resonance and electron spin echo-envelope modulation spectroscopies, with the aim of evaluating the effective role played by defect centres and of assessing whether they can be used to monitor changes in the physical properties of quartz powders with reference to their health effects. The obtained results point to two interactions of the Al defect centres with H⁺, hosted in sites within the channels parallel and perpendicular to the c axis of quartz, respectively. These two Al/H⁺ (h_Al) centres exhibit a weak chemical bond, and their relative amounts appear to be modified/controlled by the thermo-mechanical processes underwent by powders. Indeed, a mechanically promoted inter-conversion between the two kinds of site is suggested. As a consequence, the h_Al centres are effective in monitoring even modest activations of powders, through thermal or mechanical processes, and they are also supposed to play a specific, relevant role in quartz reactivity during the considered industrial processes.     

Internal structure and kinematics of Variscan thrust sheets in the valley of the Trubia River (Cantabrian Zone, NW Spain): regional tectonic implications

The Variscan Belt in western Europe shows an arcuate geometry that is usually named Ibero-Armorican Arc. The nucleus of this arc, known as the Asturian Arc, comprises the Cantabrian Zone which is a foreland fold and thrust belt. The Trubia River area is located in the inflexion zone of the Asturian Arc, which is a strategic structural position for unraveling the geometry and kinematics of the Variscan thrust sheets and related folds. Geological mapping, construction of stratigraphic and structural cross sections, analysis of kinematic indicators, and estimate of shortening for each cross section have been carried out. This area consists of two major antiform-synform pairs related to two imbricate thrust systems. These folds are asymmetric, tight, and their axial traces follow the trend of the Asturian Arc. They have been interpreted as fault-propagation folds. The emplacement directions measured in the Trubia River area change from north to south and converge towards the core of the Asturian Arc. The minimum shortening estimated ranges between 16.4 and 17.6 km, which corresponds to 56.9 and 59.4%. The complex cross-cutting relationships between folds and thrusts suggest that, in general, the different structural units followed a forward-breaking sequence of emplacement, with some breaching and a few out-of-sequence thrusts. The analysis of the transport vectors together with the disposition of the fold axes and post-thrusting faults that deform the thrust stack are evidence of a late deformation event that is partially or totally responsible for the arcuate form of the Asturian Arc. The timing of the Asturian Arc, amount of shortening, and sequence of emplacement of the structures are in accordance with previous regional studies of the Cantabrian Zone.     

A depth average SPH model including μ(I) rheology and crushing for rock avalanches

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

Uncertainty quantification of overpressure buildup through inverse modeling of compaction processes in sedimentary basins

This study illustrates a procedure conducive to a preliminary risk analysis of overpressure development in sedimentary basins characterized by alternating depositional events of sandstone and shale layers. The approach rests on two key elements: (1) forward modeling of fluid flow and compaction, and (2) application of a model-complexity reduction technique based on a generalized polynomial chaos expansion (gPCE). The forward model considers a one-dimensional vertical compaction processes. The gPCE model is then used in an inverse modeling context to obtain efficient model parameter estimation and uncertainty quantification. The methodology is applied to two field settings considered in previous literature works, i.e. the Venture Field (Scotian Shelf, Canada) and the Navarin Basin (Bering Sea, Alaska, USA), relying on available porosity and pressure information for model calibration. It is found that the best result is obtained when porosity and pressure data are considered jointly in the model calibration procedure. Uncertainty propagation from unknown input parameters to model outputs, such as pore pressure vertical distribution, is investigated and quantified. This modeling strategy enables one to quantify the relative importance of key phenomena governing the feedback between sediment compaction and fluid flow processes and driving the buildup of fluid overpressure in stratified sedimentary basins characterized by the presence of low-permeability layers. The results here illustrated (1) allow for diagnosis of the critical role played by the parameters of quantitative formulations linking porosity and permeability in compacted shales and (2) provide an explicit and detailed quantification of the effects of their uncertainty in field settings.     

Ordovician igneous and metamorphic units in southeastern Puna: New U–Pb and Sm–Nd data and implications for the evolution of northwestern Argentina

New field, petrological, geochemical, and geochronological data (U–Pb and Sm–Nd) for Ordovician rock units in the southeastern Puna, NW Argentina, indicate two lithostratigraphic units at the eastern–northeastern border of salar Centenario: (1) a bimodal volcanosedimentary sequence affected by low- to medium-grade metamorphism, comprising metasediments associated with basic and felsic metavolcanic rocks, dated 485 ± 5 Ma, and (2) a plutonic unit composed of syenogranites to quartz-rich leucogranites with U–Pb zircon ages between 462 ± 7 and 475 ± 5 Ma. Felsic metavolcanic and plutonic rocks are peraluminous and show similar geochemical differentiation trends. They also have similar Sm–Nd isotopic compositions (T_DM model ages of 1.54–1.78 Ga; ε_Nd(T) values ranging from −3.2 to −7.5) that suggest a common origin and derivation of the original magmas from older (Meso-Paleoproterozoic?) continental crust. Mafic rocks show ε_Nd(T) ranging from +2.3 to +2.5, indicating a depleted mantle source. The data presented here, combined with those in the literature, suggest Ordovician magmatism mainly recycles preexisting crust with minor additions of juvenile mantle-derived material.