Climatic changes in central and eastern Canada inferred from deep borehole temperature data

We analyzed data from 23 boreholes at 19 sites in central and eastern Canada, for the purpose of estimating ground surface temperature (GST) histories. These boreholes were logged down to at least 550 m depth with thermistor probes. Thermal conductivity measurements had been previously made at small depth intervals for the entire depth ranges of most of the boreholes. The temperature profiles of these boreholes do not indicate water disturbance. We estimated terrain effects for each borehole using a time dependent solid-angle method. The thermal perturbations caused by lakes or deforestation near the borehole sites are insignificant in most cases. However, four of the holes were found to be severely influenced by terrain effects. GSTs estimated from the borehole data less influenced by the terraineffects form two groups. The first group, which are generally from data of better quality, show a cold period near the end of the last century before the recent warming trend; the second show it 80–100 years earlier. We consider the former typical of the climate of the Boreal climatic region of Canada. The difference between the two groups may reflect the spacial variability of the climate. Four GST estimates do not belong to either type, and the reasons are discussed.     

Warm frontal structure in association with a rapidly deepening extratropical cyclone

Abstract

The detailed characteristics of a CASPII warm frontal passage are presented in this article. This storm, Intensive Operating Period (IOP) 13 (February 26–27, 1992), was observed in detail with an array of diverse instruments. It has the advantage over earlier freezing precipitation studies of having simultaneous, in situ and remote sensing measurements by aircraft and ground‐based Doppler radar.

The associated precipitation was in the form of banded structures parallel to the front. Within these bands were embedded precipitation cores, some parallel to the band, some perpendicular. The warm front itself was characterized by major perturbations in its kinematic and thermodynamic features. The cores oriented parallel to the front were the result of embedded convection generated, at least in part, by the irregularities in the frontal surface.

The cores oriented perpendicular to the front were closely associated with the 0°C isotherm on the underside of the frontal inversion. Precipitation phase changes played a significant role in the occurrence of wide near 0°C regions, both vertically and horizontally. These regions had a profound influence on the observed precipitation types and led to complex precipitation‐thermodynamic‐dynamic interactions. Instabilities produced by these interactions are seen in wave‐like features observed by the Doppler radar in these regions, both parallel and perpendicular to the frontal zone.     

成熟勘探矿集区新一轮找矿：勘查战略创新及铜陵矿集区找矿实例

成熟勘探的矿集区非常有必要开展新一轮的找矿，但矿床模式的局限和大埋藏深度等困难制约了这些地区的预测性找矿发现。促进其预测性找矿发现的关键战略包括：勘查模型的创新、勘查技术的创新和各种信息的综合集成预测。勘查模型的创新必须包含基于地球动力学剖析的新成矿概念，动力学数值模拟是有效的创新手段之一；勘查技术创新的主要目的是加大探测深度和提高探测与解释的准确性，必须以详细可靠的地质资料为基础；综合信息集成是利用GIS和知识驱动及数据驱动的方法充分提取各种数据中的有用信息，集成为更加可靠的预测图。在这种思想的指导下，我们在铜陵凤凰山矿田进行了预测和勘查，并成功地发现了深部的隐伏矿床。     

Observations of the supernova 1985F with a new spectrograph

We present the spectrum of the supernova 1985F over the wavelength range 4600 to 10000 Å as recorded in one 200 s exposure on 16 May, 1985, when its age was estimated to bet240 days. This wideband measurement with a resolution of 20 Å was made with the new Faint Object Spectrograph on the Isaac Newton Telescope (INT) at the Observatorio del Roque de los Muchachos. Broad line features were observed for the ionsOi,Oii, andOiii, Caii, and Nai although broad H was noteably absent. This suggests type I rather than type II properties but Filippenko and Sargent (1985c) have concluded this object to be of neither type and of a new peculiar class. We have observed the Caii infra-red triplet at 8600 Å which has not been previously reported in the spectrum of SN1985F and alsoCi] at 9800 Å.     

Phase transitions and path dependence in urban evolution

There is a long history of recognising and interpreting discontinuous change—phase transitions—in urban systems. In this paper, we use the aggregate retail model as an archetype to explore some new ideas. For example, we argue that the dependence of paths of development on initial conditions has been understudied, and we offer a new graphical analysis that demonstrates explicitly their influence on discrete change. We introduce an order parameter, and we plot this on a ‘results grid’ to facilitate the discovery of possible phase transitions. We illustrate the use of these new developments with an application to London. We show how retail developers can change the ‘initial conditions’ at a point in time and possibly bring about phase transitions by their actions. This also shows that it should be possible to account for the history of urban development as a sequence of initial conditions, illustrating path dependence. Secondly, the model could be deployed in relation to a new shopping zone, and the tools developed here used to calculate the minimum size of a new development in order for it to compete. We explore the ‘minimum size’ idea in relation to a new shopping zone in London.     

Annual bed‐elevation regime in the alluvial channel of Squamish River,Southwestern British Columbia,Canada

The aim of this study is to examine the annual regime of channel scour and fill by monitoring bed‐elevation changes in a reach of Squamish River in southwestern British Columbia, Canada. Sonar surveys of 13 river cross‐sections in a sandy gravel‐bed single‐channel study reach were repeated biweekly over a full hydrologic year (1995/6). The survey results show that bedload movement occurs as waves or pulses forming bedwaves that appear to maintain an overall coherence with movement downstream. These bedwaves propagate downstream by a mode here termed pulse scour and pulse fill, a process distinguished from the conventional mode of scour and fill commonly associated with flood events (here termed local scour and local fill). Bedwave celerity was estimated to be about 15·5 m d⁻¹ corresponding to a bedwave residence time in the study reach of almost one hydrologic year. The total amount of local bed‐elevation change ranged between 0·22 m and 2·41 m during the period of study. Analysis of the bed‐elevation and flow data reveals that, because of the bedwave phenomenon, there is no simple relation between the mean bed‐elevation and discharge nor any strong linear correlation among cross‐sectional behaviour. The bed‐elevation data also suggest that complex changes to the bed within a cross‐section are masked when the bed is viewed in one dimension, although no definitive trends in bed behaviour were found in the two‐dimensional analysis. Although a weak seasonal effect is evident in this study, the bed‐elevation regime is dominated by sediment supply‐driven fluctuations in bedload transport occurring at timescales shorter than the seasonal fluctuation in discharge. The study also indicates that bed‐elevation monitoring on Squamish River, and others like it, for purposes of detecting and measuring aggradation/degradation must take into account very considerable and normal channel‐bed variability operating at timescales from hours to months. Copyright © 2000 John Wiley & Sons, Ltd.     

Water‐worked gravel beds in laboratory flumes – a natural analogue?

An investigation has been conducted to identify the key parameters that are likely to scale laboratory sediment deposits to the field scale. Two types of bed formation were examined: one where sediment is manually placed and screeded and the second where sediment is fed into a running flume. This later technique created deposits through sequential cycles of sediment transport and deposition. Detailed bed surface topography measurements have been made over a screeded bed and three fed beds. In addition, bulk subsurface porosity and hydraulic conductivity have been measured. By comparing the four beds, results revealed that certain physical properties of the screeded bed were clearly different from those of the fed beds. The screeded bed had a random organization of grains on both the surface and within the subsurface. The fed beds exhibited greater surface and subsurface organization and complexity, and had a number of properties that closely resembled those found for water‐worked gravel beds. The surfaces were water‐worked and armoured and there was preferential particle orientation and direction of imbrication in the subsurface. This suggested that fed beds are able to simulate, in a simplified manner, both the surface and subsurface properties of established gravel‐bed river deposits. The near‐bed flow properties were also compared. It revealed that the use of a screeded bed will typically cause an underestimation in the degree of temporal variability in the flow. Furthermore, time‐averaged streamwise velocities were found to be randomly organized over the screeded bed but were organized into long streamwise flow structures over the fed beds. It clearly showed that caution should be taken when comparing velocity measurements over screeded beds with water‐worked beds, and that the formation of fed beds offers an improved way of investigating intragravel flow and sediment–water interface exchange processes in gravel‐bed rivers at a laboratory scale. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of the distribution of size of irregularly shaped particles from laser diffractometer measurements

The formal stereological transformation equation for particle sieve size distribution from measurements in lower dimensional spaces is applied to laser diffractometer measurements. The transformation function for iron ore particles is measured experimentally, and modeled. The solution is tested against the measured transformation function data as well as synthetic composite distributions of the original sample. The natural size distribution of a sample taken from a grinding circuit stream was measured by a combination of standard sieving and cyclosizer, and the result is compared to the transformed size distribution calculated from laser diffractometer measurements. The stereological transformation technique performed well in all cases.     

Magnetite-sulfide chondrules and nodules in CK carbonaceous chondrites: Implications for the timing of CK oxidation

Abstract— CK carbonaceous chondrites contain rare (～0.1 vol%) magnetite-sulfide chondrules. These objects range from ～240 to 500 μm in apparent diameter and have ellipsoidal to spheroidal morphologies, granular textures and concentric layering. They are very similar in size, shape, texture, mineralogy and mineral composition to the magnetite-sulfide nodules which occur inside mafic silicate chondrules in CK chondrites. It seems likely that the magnetite-sulfide chondrules constitute the subset of magnetite-sulfide nodules that escaped as immiscible droplets from their molten silicate chondrule hosts during chondrule formation. The intactness of the magnetite-sulfide chondrules and nodules implies that oxidation of CK metal occurred before agglomeration; otherwise, the factor of two increase in molar volume associated with the conversion of metallic Fe-Ni into magnetite would have disrupted the objects and destroyed their concentrically layered textures. Hence, the pervasive silicate darkening of CK chondrites documented previously was caused by the shock mobilization of magnetite and sulfide, not metallic Fe-Ni and sulfide as in shock-darkened ordinary chondrites.