Erosion and sedimentation in Kalpakkam (N Tamil Nadu, India) from the 26th December 2004 tsunami

Laterally extensive sand sheets deposited by the 26th December 2004 Asian tsunami provide a valuable modern analogue for comparison with wash over deposits of unknown origin. In many places on the east coast of India, distinct deposits of marine sand drape the landscape and overlie the muddy soils of the coastal plain. This paper discusses detailed measurements of coastal topography, tsunami flow height, and deposit thickness made at Kalpakkam, India. Five transects were examined in detail to assess the sedimentology and spatial distribution of the tsunami deposit. Near the mean water line, the tsunami eroded approximately 10–25 cm of sand from the beach and berm. At Kalpakkam the sand sheet deposited by the tsunami begins 25 m from the shore extending 420 m inland where it becomes thin and patchy approximately 30 m from the limit of inundation. In some cases, the deposit consists of 2 to 4 normally graded units, with coarse sand near the base and fine sand at the top, a characteristic observed in many tsunami deposits worldwide. In many places, the deposits also contain numerous thin laminated units, a characteristic usually associated with storm over wash. The presence of the laminated beds is indicative of the complexity of tsunami sedimentation on the coast. Such observations are essential to the formation of definitive facies models for palaeo-overwash studies that are capable of distinguishing between sediments deposited by storms or tsunami.     

A polygon-based approach for matching OpenStreetMap road networks with regional transit authority data

Matching road networks is an essential step for data enrichment and data quality assessment, among other processes. Conventionally, road networks from two datasets are matched using a line-based approach that checks for the similarity of properties of line segments. In this article, a polygon-based approach is proposed to match the OpenStreetMap road network with authority data. The algorithm first extracts urban blocks that are central elements of urban planning and are represented by polygons surrounded by their surrounding streets, and it then assigns road lines to edges of urban blocks by checking their topologies. In the matching process, polygons of urban blocks are matched in the first step by checking for overlapping areas. In the second step, edges of a matched urban block pair are further matched with each other. Road lines that are assigned to the same matched pair of urban block edges are then matched with each other. The computational cost is substantially reduced because the proposed approach matches polygons instead of road lines, and thus, the process of matching is accelerated. Experiments on Heidelberg and Shanghai datasets show that the proposed approach achieves good and robust matching results, with a precision higher than 96% and a F1-score better than 90%.     

Paleoproterozoic evolution of Fennoscandia and Greenland

The Paleoproterozoic evolution of Fennoscandia and Greenland can be divided into major rifting and orogenic stages. The Paleoproterozoic rifting of Fennoscandia started with 2.505-2.1 Ga, multiphase, southwest-prograding, intraplate rifting. Both Fennoscandia and Greenland experienced 2.1- 2.04 Ga drifting and separation of their Archean cratons by newly-formed oceans. The main Paleoproterozoic orogenic evolution of Fennoscandia resulted in the Lapland-Kola orogen （1.94-1.86 Ga） and the composite Svecofennian orogen （1.92-1.79 Ga）. The Paleoproterozoic orogens in Greenland, from north to south, are the lnglefield mobile belt （1.95-1.92 Ga）, the Rinkian .fold belt/Nagssugtoqidian orogen （1.88-1.83 Ga） and the Ketilidian orogen （c. 1.8 Ga）. The Lapland-Kola orogen, Inglefield mobile belt and the Rinkian fold belt/Nagssugtoqidian orogen are continent-continent collision zones with limited formation of new Paleoproterozoic crust, whereas the Ketilidian orogen displays a convergent plate-tectonic system, without subsequent collision. The composite Svecofennian orogen is responsible for the main Paleoproterozoic crustal growth of Fennoscandia.     

Conceptual model of recharge to southeastern Badain Jaran Desert groundwater and lakes from environmental tracers

Sources of groundwater recharge to the Badain Jaran Desert in China have been investigated using geochemical and isotopic techniques. Stable isotope compositions (δ¹⁸O and δ²H) of shallow groundwater and surface water from oasis lakes evolve from a starting composition considerably depleted compared to local unsaturated zone moisture, confirming inferences from chloride mass balance that direct infiltration of precipitation is not a volumetrically important source of recharge to the shallow aquifer in the study area. Shallow phreatic and deeper confined groundwater bodies appear unconnected based on chemical composition and radiocarbon activities. Hydrogeologic evidence points toward a bordering mountain range (Yabulai) as a likely recharge zone, which is consistent with tracer results. A mean residence time in the range of 1–2 ka for the desert’s southeastern margin is inferred from radiocarbon. These results reveal that some replenishment to the desert aquifer is occurring but at a rate much lower than previously suggested, which is relevant for water resources planning in this ecologically sensitive area.     

A study of methods to estimate debris flow velocity

Debris flow velocities are commonly back-calculated from superelevation events which require subjective estimates of radii of curvature of bends in the debris flow channel or predicted using flow equations that require the selection of appropriate rheological models and material property inputs. This research investigated difficulties associated with the use of these conventional velocity estimation methods. Radii of curvature estimates were found to vary with the extent of the channel investigated and with the scale of the media used, and back-calculated velocities varied among different investigated locations along a channel. Distinct populations of Bingham properties were found to exist between those measured by laboratory tests and those back-calculated from field data; thus, laboratory-obtained values would not be representative of field-scale debris flow behavior. To avoid these difficulties with conventional methods, a new preliminary velocity estimation method is presented that statistically relates flow velocity to the channel slope and the flow depth. This method presents ranges of reasonable velocity predictions based on 30 previously measured velocities.     

Lead Isotope Homogeneity of NIST SRM 610 and 612 Glass Reference Materials: Constraints from Laser Ablation Multicollector ICP-MS (LA-MC-ICP-MS) Analysis

This contribution presents data for laser ablation multicollector ICP‐MS (LA‐MC‐ICP‐MS) analyses of NIST SRM 610 and 612 glasses with the express purpose of examining the Pb isotope homogeneity of these glasses at the ～ 100 μm spatial scale, relevant to in situ analysis. Investigation of homogeneity at these scales is important as these glasses are widely used as calibrators for in situ measurements of Pb isotope composition. Results showed that at the levels of analytical uncertainty obtained, there was no discernable heterogeneity in Pb isotope composition of NIST SRM 610 and also most probably for NIST SRM 612. Traverses across the ～ 1.5 mm glass wafers supplied by NIST, consisting of between 75 and 133 individual measurements, showed no compositional outliers at the two standard deviation level beyond those expected from population statistics. Overall, the measured Pb isotope ratios from individual traverses across NIST SRM 610 and 612 wafers closely approximate single normally‐distributed populations, with standard deviations similar to the average internal uncertainty for individual measurement blocks. Further, Pb isotope ratios do not correlate with Tl/Pb ratios measured during the analysis, suggesting that regions of volatile element depletion (marked by low Tl/Pb) in these glasses are not associated with changes in Pb isotope composition. For NIST SRM 610 there also appeared to be no variation in Pb isotope composition related to incomplete mixing of glass base and trace element spike during manufacture. For NIST SRM 612 there was some dispersion of measured ratios, including some in a direction parallel to the expected mixing line for base‐spike mixing. However, there was no significant correlation parallel to the mixing line. At this time this cannot be unequivocally demonstrated to result from glass heterogeneity, but it is suggested that NIST SRM 610 be preferred for standardising in situ Pb isotope measurements. Data from this study also showed significantly better accuracy and somewhat better precision for ratios corrected for mass bias by external normalisation to Pb isotope ratios measured in bracketing calibrators compared to mass bias corrected via internal normalisation to measured ²⁰⁵Tl/²⁰³Tl, although the Tl isotopic composition of both glasses appears to be homogeneous.     

An analysis of the effects of temperatures and circulations on the strength of the low-level jet in the Turkana Channel in East Africa

Theoretical and Applied Climatology - The Turkana Low-Level Jet (LLJ) was discovered in the early 1980s, yet there are still questions about the primary forcing mechanisms that drive and sustain...     

Seasonal Forecasts of the Summer 2016 Yangtze River Basin Rainfall

The Yangtze River has been subject to heavy flooding throughout history,and in recent times severe floods such as those in 1998 have resulted in heavy loss of life and livelihoods.Dams along the river help to manage flood waters,and are important sources of electricity for the region.Being able to forecast high-impact events at long lead times therefore has enormous potential benefit.Recent improvements in seasonal forecasting mean that dynamical climate models can start to be used directly for operational services.The teleconnection from El Ni ?no to Yangtze River basin rainfall meant that the strong El Ni ?no in winter 2015/16 provided a valuable opportunity to test the application of a dynamical forecast system.This paper therefore presents a case study of a real-time seasonal forecast for the Yangtze River basin,building on previous work demonstrating the retrospective skill of such a forecast.A simple forecasting methodology is presented,in which the forecast probabilities are derived from the historical relationship between hindcast and observations.Its performance for2016 is discussed.The heavy rainfall in the May–June–July period was correctly forecast well in advance.August saw anomalously low rainfall,and the forecasts for the June–July–August period correctly showed closer to average levels.The forecasts contributed to the confidence of decision-makers across the Yangtze River basin.Trials of climate services such as this help to promote appropriate use of seasonal forecasts,and highlight areas for future improvements.     

Skillful Seasonal Forecasts of Summer Surface Air Temperature in Western China by Global Seasonal Forecast System Version 5

Variations of surface air temperature(SAT) are key in affecting the hydrological cycle,ecosystems and agriculture in western China in summer.This study assesses the seasonal forecast skill and reliability of SAT in western China,using the Glo Sea5 operational forecast system from the UK Met Office.Useful predictions are demonstrated,with considerable skill over most regions of western China.The temporal correlation coefficients of SAT between model predictions and observations are larger than 0.6,in both northwestern China and the Tibetan Plateau.There are two important sources of skill for these predictions in western China:interannual variation of SST in the western Pacific and the SST trend in the tropical Pacific.The tropical SST change in the recent two decades,with a warming in the western Pacific and cooling in the eastern Pacific,which is reproduced well by the forecast system,provides a large contribution to the skill of SAT in northwestern China.Additionally,the interannual variation of SST in the western Pacific gives rise to the reliable prediction of SAT around the Tibetan Plateau.It modulates convection around the Maritime Continent and further modulates the variation of SAT on the Tibetan Plateau via the surrounding circulation.This process is evident irrespective of detrending both in observations and the model predictions,and acts as a source of skill in predictions for the Tibetan Plateau.The predictability and reliability demonstrated in this study is potentially useful for climate services providing early warning of extreme climate events and could imply useful economic benefits.     

The critical layers and other singular regions in ideal hydrodynamics and magnetohydrodynamics

The governing singular differential equations are stated for certain systems in ideal hydrodynamics and magnetohydrodynamics. The solutions of these equations are studied in the neighborhood of the singular regions, and can be conveniently characterised by the roots of the corresponding indicial equation. The nature of the solution determines the nature of the dispersion relation (relating frequency and wavenumberk) and of the Green's function for the problem. The differences between the various classes of problems are discussed, and exemplified by considering the initial value problem for three cases: (a) unstratified shear flow, (b) stratified shear flow, and (c) a static magnetofluid. The latter case is typical of a number of problems of astrophysical interest, and possesses a rich mathematical and physical structure.