Impact of land cover change on land surface temperature: A case study of Spiti Valley

Land surface temperature(LST) is the skin temperature of the earth surface. LST depends on the amount of sunlight received by any geographical area. Apart from sun light, LST is also affected by the land cover, which leads to change in land surface temperature. Impact of land cover change(LCC) on LST has been assessed using Landsat TM5, Landsat 8 TIRS/OLI and Digital Elevation Model(ASTER) for Spiti Valley, Himachal Pradesh, India. In the present study, Spiti valley was divided into three altitudinal zones to check the pattern of changing land cover along different altitudes and LST was calculated for all the four land cover categories extracted from remote sensing data for the years of 1990 and 2015. Matrix table was used as a technique to evaluate the land cover change between two different years. Matrix table shows that as a whole, about 2,151,647 ha(30%) area of Spiti valley experienced change in land cover in the last 25 years. The result also shows vegetation and water bodies increased by 107,560.2 ha(605.87%) and 45 ha(0.98%), respectively. Snow cover and barren land decreased by 19,016.5 ha(23.92%) and 88,589(14.14%), during the study period. A significant increase has been noticed in vegetation amongst all land cover types. Minimum, maximum and mean LST for three altitudinal zones have been calculated. The mean LST recorded was 11℃ in 1990 but it rose by 2℃ and reached to 13℃ in 2015. Changes in LST were obtained for each land cover categories. The mean temperature of different land cover types was calculated by averaging value of all pixels of a given land cover types. The mean LST of vegetation, barren land, snow cover and water body increased by 6℃, 9℃, 1℃, and 7℃, respectively. Further, relationships between LST, Normalized Difference Snow Index(NDSI), and Normalised Difference Vegetation Index(NDVI) were established using Linear Regression.     

Quantification of improvements by using AWiFS over WiFS data

The Advanced WiFS sensor of RESOURCESAT- 1 satellite offers significantly improved specifications compared to the WiFS sensor onboard IRS IC, P3 and ID satellites. The improvements are in terms of spatial resolution, radiometry (quantisation levels) and number of spectral bands. In the present study, an attempt has been made to quantify the gains due to these enhanced specifications. The study has been carried out in a predominantly agricultural area. For the study reported here, one set of overlapping data acquired on the same day by WiFS and AWiFS sensors has been selected. This eliminates the need of atmospheric correction/ normalization for comparison. The effect of spatial resolution has been studied by applying ISODATA spectral clustering algorithm with number of clusters set at three different levels, viz., 10, 20 and 30. They are assumed to mimic first, second and third level classification, respectively. Output images were filtered using 3 × 3 majority filter. Homogeneous polygons having area less than 1/2 and 1 pixel of WiFS were recorded. This indicates the minimum loss by using WiFS data. A relative gain of 10 – 15 % is observed due to improvement in spatial resolution. For comparison of radiometry, local variance measure was used. It was observed that local variance is much larger for AWiFS data in comparison with WiFS data. This indicates presence of enhanced local contrast, hence heterogeneity, in AWiFS data over WiFS data. Separability analysis has been carried out to demonstrate improvements due to two additional spectral bands (Green and SWIR).     

A universal kriging approach for spatial functional data

In a wide range of scientific fields the outputs coming from certain measurements often come in form of curves. In this paper we give a solution to the problem of spatial prediction of non-stationary functional data. We propose a new predictor by extending the classical universal kriging predictor for univariate data to the context of functional data. Using an approach similar to that used in univariate geostatistics we obtain a matrix system for estimating the weights of each functional variable on the prediction. The proposed methodology is validated by analyzing a real dataset corresponding to temperature curves obtained in several weather stations of Canada.     

Leaching behavior of lignite fly ash with shake and column tests

The maximum concentration of the majority of the trace metals in the leachates from shake and column test of lignite fly ash (LFA) was within the prescribed limits; however, total dissolved solids, total hardness, cations and anions (except K⁺), being above the prescribed limits, may lead to the increase in the hardness and salinity in the soil on the disposal of LFA. Present generation of huge amount of fly ash from thermal power plants (TPPs) is a big challenge concerning contamination of soil, crop produce and surface and ground water bodies due to the presence of some of the toxic trace metals in it. The leaching behavior of alkaline LFA (pH, 10.94), from TPP of Neyveli Lignite Corporation (NLC), India, was investigated by shake and column tests using water and sodium acetate buffer. The leaching of trace metals from LFA was governed by their concentrations, association with the ash particles, leaching duration and pH of the leachate (most influencing parameter). The leaching of metals followed the order: buffer column > aqueous column > aqueous shake > buffer shake test.     

Early Cosmological Models with Bulk Viscosity in Brans-Dicke Theory

The effect of time dependent bulk viscosity on the evolution of Friedmann models with zero curvature in Brans-Dicke theory is studied. The solutions of the field equations with ‘gamma-law’ equation of state p = (γ-1) ρ, where γ varies continuously as the Universe expands, are obtained by using the power-law relation φ = bR ⁿ , which lead to models with constant deceleration parameter. We obtain solutions for the inflationary period and radiation dominated era of the universe. The physical properties of cosmological solutions are also discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Directional interpolation of multicomponent data

A method for interpolation of multicomponent streamer data based on using the local directionality structure is presented. The derivative components are used to estimate a vector field that locally describes the direction with the least variability. Given this vector field, the interpolation can be phrased in terms of the solution of a partial differential equation that describes how energy is transported between regions of missing data. The approach can be efficiently implemented using readily available routines for computer graphics. The method is robust to noise in the measurements and particularly towards high levels of low‐frequent noise that is present in the derivative components of the multicomponent streamer data.     

Probabilistic Assessment of Earthquake Recurrence in Northeast India and Adjoining Regions

Northeast India and adjoining regions (20°–32° N and 87°–100° E) are highly vulnerable to earthquake hazard in the Indian sub-continent, which fall under seismic zones V, IV and III in the seismic zoning map of India with magnitudes M exceeding 8, 7 and 6, respectively. It has experienced two devastating earthquakes, namely, the Shillong Plateau earthquake of June 12, 1897 (M _w 8.1) and the Assam earthquake of August 15, 1950 (M _w 8.5) that caused huge loss of lives and property in the Indian sub-continent. In the present study, the probabilities of the occurrences of earthquakes with magnitude M ≥ 7.0 during a specified interval of time has been estimated on the basis of three probabilistic models, namely, Weibull, Gamma and Lognormal, with the help of the earthquake catalogue spanning the period 1846 to 1995. The method of maximum likelihood has been used to estimate the earthquake hazard parameters. The logarithmic probability of likelihood function (ln L) is estimated and used to compare the suitability of models and it was found that the Gamma model fits best with the actual data. The sample mean interval of occurrence of such earthquakes is estimated as 7.82 years in the northeast India region and the expected mean values for Weibull, Gamma and Lognormal distributions are estimated as 7.837, 7.820 and 8.269 years, respectively. The estimated cumulative probability for an earthquake M ≥ 7.0 reaches 0.8 after about 15–16 (2010–2011) years and 0.9 after about 18–20 (2013–2015) years from the occurrence of the last earthquake (1995) in the region. The estimated conditional probability also reaches 0.8 to 0.9 after about 13–17 (2008–2012) years in the considered region for an earthquake M ≥ 7.0 when the elapsed time is zero years. However, the conditional probability reaches 0.8 to 0.9 after about 9–13 (2018–2022) years for earthquake M ≥ 7.0 when the elapsed time is 14 years (i.e. 2009).