The impacts of mountain pine beetle disturbance on the energy balance of snow during the melt period

Mountain snowpacks provide most of the annual discharge of western US rivers, but the future of water resources in the western USA is tenuous, as climatic changes have resulted in earlier spring melts that have exacerbated summer droughts. Compounding changes to the physical environment are biotic disturbances including that of the mountain pine beetle (MPB), which has decimated millions of acres of western North American forests. At the watershed scale, MPB disturbance increases the peak hydrograph, and at the stand scale, the ‘grey’ phase of MPB canopy disturbance decreases canopy snow interception, increases snow albedo, increases net shortwave radiation, and decreases net longwave radiation versus the ‘red’ phase. Fewer studies have been conducted on the red phase of MPB disturbance and in the mixed coniferous stands that may follow MPB‐damaged forests. We measured the energy balance of four snowpacks representing different stages of MPB damage, management, and recovery: a lodgepole pine stand, an MPB‐infested stand in the red phase, a mixed coniferous stand (representing one successional trajectory), and a clear‐cut (representing reactive management) in the Tenderfoot Creek Experimental Forest in Montana, USA. Net longwave radiation was lower in the MPB‐infested stand despite higher basal area and plant area index of the other forests, suggesting that the desiccated needles serve as a less effective thermal buffer against longwave radiative losses. Eddy covariance observations of sensible and latent heat flux indicate that they are of similar but opposite magnitude, on the order of 20 MJ m^?2 during the melt period. Further analyses reveal that net turbulent energy fluxes were near zero because of the temperature and atmospheric vapour pressure encountered during the melt period. Future research should place snow science in the context of forest succession and management and address important uncertainties regarding the timing and magnitude of needlefall events. Copyright © 2015 John Wiley & Sons, Ltd.     

Harvest patterns and effort dynamics of indigenous and non-indigenous commercial sectors of the eastern Torres Strait reef line fishery

The reef line fishery (RLF) in eastern Torres Strait (ETS) is unique in that it has both a commercial indigenous sector and a commercial non-indigenous sector. Recently, concerns have been expressed by all stakeholders about the long-term sustainability of the fishery. These concerns have been exacerbated by the lack of detailed catch and effort information from both sectors, which has precluded any formal assessment of the fishery. In this paper, we characterise the harvest patterns and effort dynamics of the indigenous and non-indigenous commercial sectors of the ETS RLF using a range of data sources including commercial logbooks, community freezer records, voluntary logbooks and observer surveys. We demonstrate that bycatch is a significant component of the catch for both sectors and identify substantial differences in harvest patterns and effort dynamics between the sectors. Differences between sectors were observed in species composition and spatial and temporal patterns in catch, effort and catch per unit effort. These results highlight the inherent variation in catch and effort dynamics between the two commercial sectors of the ETS RLF and provide valuable information for the development of future assessments and appropriate management strategies for the fishery. The more reliable estimates of harvest patterns and effort dynamics for both sectors obtained from observer surveys will also assist in resolving issues relating to allocation of reef fish resources in Torres Strait.     

Effects of antecedent moisture and macroporosity on infiltration and water flow in frozen soil

Infiltration into frozen soil plays an important role in soil freeze–thaw and snowmelt-driven hydrological processes. To better understand the complex thermal energy and water transport mechanisms involved, the influence of antecedent moisture content and macroporosity on infiltration into frozen soil was investigated. Ponded infiltration experiments on frozen macroporous and non-macroporous soil columns revealed that dry macroporous soil produced infiltration rates reaching 10³ to 10⁴ mm day⁻¹, two to three orders of magnitude larger than dry non-macroporous soil. Results suggest that rapid infiltration and drainage were a result of preferential flow through initially air-filled macropores. Using recorded flow rates and measured macropore characteristics, calculations indicated that a combination of both saturated flow and unsaturated film flow likely occurred within macropores. Under wet conditions, regardless of the presence of macropores, infiltration was restricted by the slow thawing rate of pore ice, producing infiltration rates of 2.8 to 5.0 mm day⁻¹. Reduced preferential flow under wet conditions was attributed to a combination of soil swelling, due to smectite-rich clay (that reduced macropore volume), and pore ice blockage within macropores. In comparison, dry soil column experiments demonstrated that macropores provided conduits for water and thermal energy to bypass the frozen matrix during infiltration, reducing thaw rates compared with non-macroporous soils. Overall, results showed the dominant control of antecedent moisture content on the initiation, timing, and magnitude of infiltration and flow in frozen macroporous soils, as well as the important role of macropore connectivity. The study provides an important data set that can aid the development of hydrological models that consider the interacting effects of soil freeze–thaw and preferential flow on snowmelt partitioning in cold regions.     

Hydropedology of a mildly‐arid loess covered area,southern Israel

Extensive loess covered areas characterize the mildly arid areas of western Israel, where average annual rainfall is 280 mm. Hydrological data point to a peculiar hydrological behavior of the ephemeral streams. The frequency of sporadic flash floods is very high. However, even in extreme rain events peak discharges are extremely low. Hydrographs are usually characterized by very steep rising and falling limbs, representative of saturated areas, extending over a limited part of the watershed. Following this observation we advanced the hypothesis that storm channel runoff originated in the channel itself, with negligible contribution from the adjoining hillslopes. The study was based on two complementary approaches. The hydrological approach was based on the detailed analysis of rainfall–runoff relationships in a small watershed (11 km²) and on the analysis of the hydrological characteristics of the drainage network. The second approach was based on the toposequence concept. Several boreholes were dug along a hillslope 400 m long. Chemical data obtained show no significant difference in the downslope direction. Similar results were also obtained for the particle size distribution and soil moisture content. Data obtained perfectly fit the concept of ‘Partial Area Contribution’ as it presents an extreme case of hydrological discontinuity at the hillslope–channel interface. The lack of pedological trends in the downslope direction is an additional indication of the limited connectivity between the hillslopes and the adjoining channel. The limited connectivity is attributed to the prevalence of low rain intensities in the study area. The present study is also relevant to our understanding of pedological processes in dryland areas. The high frequency of intermittent low intensity rainstorms limits runoff generation and flow distances, and casts doubt on the general application of the toposequence approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Approximation of van Genuchten Parameter Ranges from Hydraulic Conductivity Data

The use of retention function and relative conductivity function is essential for the calculation of flow in a variably saturated media using the Richards equation. A widely used mathematical model for this is the Mualem-van Genuchten model which requires the shape parameters and . These, however, are difficult to obtain. When data is scarce, and are often taken from literature and may deviate largely from actual values. The current study presents a novel mathematical model for the approximation of $$ and $$ and for the further estimation of realistic value ranges, which may be used as parameter space, for example, for the calibration of a numerical model. The model was developed for cases where data is scarce and only values of saturated hydraulic conductivity are available. It is based on a large data set from literature and it is demonstrated that the model estimates mean values from that data set with a good accuracy. In order to show the applicability of the model, a second data set has been compiled anew (provided as Supporting Information). The model is incorporated into the current version of the freeware computer program HYPAGS, which enables easy usage.     

Prevalence and distribution of fecal indicator organisms in South Florida beach sand and preliminary assessment of health effects associated with beach sand exposure

Fecal indicator levels in nearshore waters of South Florida are routinely monitored to assess microbial contamination at recreational beaches. However, samples of sand from the surf zone and upper beach are not monitored which is surprising since sand may accumulate and harbor fecal-derived organisms. This study examined the prevalence of fecal indicator organisms in tidally-affected beach sand and in upper beach sand and compared these counts to levels in the water. Since indicator organisms were statistically elevated in sand relative to water, the study also considered the potential health risks associated with beach use and exposure to sand. Fecal coliforms, Escherichia coli, enterococci, somatic coliphages, and F(+)-specific coliphages were enumerated from sand and water at three South Florida beaches (Ft. Lauderdale Beach, Hollywood Beach, and Hobie Beach) over a 2-year period. Bacteria were consistently more concentrated in 100g samples of beach sand (2-23 fold in wet sand and 30-460 fold in dry sand) compared to 100ml samples of water. Somatic coliphages were commonly recovered from both sand and water while F(+)-specific coliphages were less commonly detected. Seeding experiments revealed that a single specimen of gull feces significantly influenced enterococci levels in some 3.1m(2) of beach sand. Examination of beach sand on a micro-spatial scale demonstrated that the variation in enterococci density over short distances was considerable. Results of multiple linear regression analysis showed that the physical and chemical parameters monitored in this study could only minimally account for the variation observed in indicator densities. A pilot epidemiological study was conducted to examine whether the length of exposure to beach water and sand could be correlated with health risk. Logistic regression analysis results provided preliminary evidence that time spent in the wet sand and time spent in the water were associated with a dose-dependent increase in gastrointestinal illness.     

Response of zooid size in Cupuladria exfragminis (Bryozoa) to simulated upwelling temperatures

We investigate the effect of the temperature–size rule upon zooids of the tropical American bryozoan Cupuladria exfragminis. Results show that mean zooid length, zooid width and zooid area vary significantly between clonal replicates of C. exfragminis kept under different controlled temperature conditions. Significantly larger zooids are produced during times of lowered water temperature that are comparable with the temperatures that occur during seasonal upwelling along the Pacific coast of Panama where the animal lives in abundance. Interpolation of data suggests that a drop of 1 °C causes a 5% increase in zooid size, and that almost all variation in zooid size in natural populations can be explained by temperature. Results are discussed in context of the potential use of zooid size variation in cupuladriid bryozoans to measure the strength of seasonal upwelling in ancient seas by analysing zooid size changes in fossil colonies. The technique of cloning cupuladriid colonies by fragmentation is also discussed with reference to its benefits in experimental studies where genotypes need to be controlled or replicated.     

Transient and Transition Factors in Modeling Permafrost Thaw and Groundwater Flow

Permafrost covers approximately 24% of the Northern Hemisphere, and much of it is degrading, which causes infrastructure failures and ecosystem transitions. Understanding groundwater and heat flow processes in permafrost environments is challenging due to spatially and temporarily varying hydraulic connections between water above and below the near-surface discontinuous frozen zone. To characterize the transitional period of permafrost degradation, a three-dimensional model of a permafrost plateau that includes the supra-permafrost zone and surrounding wetlands was developed. The model is based on the Scotty Creek basin in the Northwest Territories, Canada. FEFLOW groundwater flow and heat transport modeling software is used in conjunction with the piFreeze plug-in, to account for phase changes between ice and water. The Simultaneous Heat and Water (SHAW) flow model is used to calculate ground temperatures and surface water balance, which are then used as FEFLOW boundary conditions. As simulating actual permafrost evolution would require hundreds of years of climate variations over an evolving landscape, whose geomorphic features are unknown, methodologies for developing permafrost initial conditions for transient simulations were investigated. It was found that a model initialized with a transient spin-up methodology, that includes an unfrozen layer between the permafrost table and ground surface, yields better results than with steady-state permafrost initial conditions. This study also demonstrates the critical role that variations in land surface and permafrost table microtopography, along with talik development, play in permafrost degradation. Modeling permafrost dynamics will allow for the testing of remedial measures to stabilize permafrost in high value infrastructure environments.     

Travel time controls the magnitude of nitrate discharge in groundwater bypassing the riparian zone to a stream on Virginia's coastal plain

Groundwater that bypasses the riparian zone by travelling along deep flow paths may deliver high concentrations of fertilizer‐derived NO₃^? to streams, or it may be impacted by the NO₃^? removal process of denitrification in streambed sediments. In a study of a small agricultural catchment on the Atlantic coastal plain of Virginia's eastern shore, we used seepage meters deployed in the streambed to measure specific discharge of groundwater and its solute concentrations for various locations and dates. We used values of Cl^? concentration to discriminate between bypass water recharged distal to the stream and that contained high NO₃^? but low Cl^? concentrations and riparian‐influenced water recharged proximal to the stream that contained low NO₃^? and high Cl^? concentrations. The travel time required for bypass water to transit the 30‐cm‐thick, microbially active denitrifying zone in the streambed determined the extent of NO₃^? removal, and hydraulic conductivity determined travel time through the streambed sediments. At all travel times greater than 2 days, NO₃^? removal was virtually complete. Comparison of the timescales for reaction and transport through the streambed sediments in this system confirmed that the predominant control on nitrate flux was travel time rather than denitrification rate coefficients. We conclude that extensive denitrification can occur in groundwater that bypasses the riparian zone, but a residence time in biologically active streambed sediments sufficient to remove a large fraction of the NO₃^? is only achieved in relatively low‐conductivity porous media. Instead of viewing them as separate, the streambed and riparian zone should be considered an integrated NO₃^? removal unit. Copyright © 2011 John Wiley & Sons, Ltd.     

Transformations of mercury, iron, and sulfur during the reductive dissolution of iron oxyhydroxide by sulfide

Methylmercury can accumulate in fish to concentrations unhealthy for humans and other predatory mammals. Most sources of mercury (Hg) emit inorganic species to the environment. Therefore, ecological harm occurs when inorganic Hg is converted to methylmercury. Sulfate- and iron-reducing bacteria (SRB and FeRB) methylate Hg, but the effects of processes involving oxidized and reduced forms of sulfur and iron on the reactivity of Hg, including the propensity of inorganic Hg to be methylated, are poorly understood. Under abiotic conditions, using a laboratory flow reactor, bisulfide (HS⁻) was added at 40 to 250 μM h⁻¹ to 5 g L⁻¹ goethite (α-FeOOH) suspensions to which Hg(II) was adsorbed (30-100 nmol m⁻²) at pH 7.5. Dissolved Hg initially decreased from 10³ or 10⁴ nM (depending on initial conditions) to 10⁻¹ nM, during which the concentration of Hg(II) adsorbed to goethite decreased by 80% and metacinnabar (β-HgS_(s)) formed, based on identification using Hg L_III-edge extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. The apparent coordination of oxygens surrounding Hg(II), measured with EXAFS spectroscopy, increased during one flow experiment, suggesting desorption of monodentate-bound Hg(II) while bidentate-bound Hg(II) persisted on the goethite surface. Further sulfidation increased dissolved Hg concentrations by one to two orders of magnitude (0.5 to 10 nM or 30 nM), suggesting that byproducts of bisulfide oxidation and Fe(III) reduction, primarily polysulfide and potentially Fe(II), enhanced the dissolution of β-HgS_(s) and/or desorption of Hg(II). Rapid accumulation of Fe(II) in the solid phase (up to 40 μmol g⁻¹) coincided with faster elevation of dissolved Hg concentrations. Fe(II) served as a proxy for elemental sulfur [S(0)], as S(0) was the dominant bisulfide oxidation product coupled to Fe(III) reduction, based on sulfur K-edge X-ray absorption near edge structure (XANES) spectroscopy. In one experiment, dissolved Hg concentrations tracked those of all sulfide species [S(-II)]. These results suggest that S(-II) reacted with S(0) to form polysulfide, which then caused the dissolution of β-HgS_(s). A secondary Fe-bearing phase resembling poorly formed green rust was observed in sulfidized solids with scanning electron microscopy, although there was no clear evidence that either surface-bound or mineralized Fe(II) strongly affected Hg speciation. Examination of interrelated processes involving S(-II) and Fe(III) revealed new modes of Hg solubilization previously not considered in Hg reactivity models.